Instruction Book

47
S
If the external device has DVI output only, use a DVI to HDMI adapter cable to connect to the HDMI1 terminal only.
S
Connect the audio cables to the AUDIO IN terminals when using a DVI to HDMI adapter cable.
(Use only a fully compliant HDMI cable (fully wired).
Select the audio setting in HDMI input. See page 19
Compatible sampling frequency of AUDIO signal through HDMI (L.PCM) : 48kHz / 44.1kHz / 32kHz
S
This HDMI connector is type A.
S
If you connect equipment without a digital output terminal, connect to the COMPONENT, S--Video or VIDEO input terminal on
the TV so you can receive an analogue signal
S
The HDMI IN terminal can only be used with 480i, 480p, 576i, 576p, 720p or 1080i picture signals. Set the Digital Set Top Box
DIGITAL OUT te rminal output setting to 480i, 480p, 576i, 576p, 720p or 1080i. For detailed information, refer to the Digital Set
Top Box instruction manual. If you cannot display the picture because your Digital Set Top Box does not have a DIGITAL OUT
terminal output setting, use the component input (or the S--Video input or Video input). In this case the picture will be displayed
as an analogue signal.
S
HDMI--compliant devices will always display the HDMI Logo.
S
Always use a fully compliant HDMI cable (fully wired).
S
HDMI2 terminal is for digital audio signal only.
S
When viewing a 1080i input source it is normal for the picture to show line jitter.
S
When viewing a Component or HDMI source then AV--Monitor Out is not available.
A
d
Aspect Control Signals
Si
g
nal name
Aspect modes
Widescreen signal (WSS) Control signal through
SCART (pin8) or HDMI
terminal
S
i
g
n
a
l
n
a
m
e
“o” indicates available
“---” indicates unavailable
Auto
Aspect
16:9 14:9 4:3 Zoom
1
Zoom
2
Zoom
3
TV AV
1
AV
2
AV
3
Com-
ponent
AV1 AV2 HDMI1 HDMI2
PAL I o o o o o o o o o o o --- o o --- ---
TV
/
PAL 525/60 o o o o o o o o o o o --- o o --- ---
T
V
/
A
V
1
/
A
V
2
/
DVB o o o o o o o o --- --- --- --- o o --- ---
A
V1
/
A
V2
/
MNTSC o o o o o o o --- --- --- --- --- o o --- ---
AV3
NTSC/AV
(Input only)
o o o o o o o --- --- --- --- --- o o --- ---
C
o
525(480)/60i o o o o o o o --- --- --- --- --- --- --- o o
o
m
p
S
525(480)/60p o o o o o o o --- --- --- --- --- --- --- o o
p
o
S
D
625(576)/50i o o o o o o o --- --- --- --- o --- --- o o
n
e
625(576)/50p o o o o o o o --- --- --- --- --- --- --- o o
e
n
t
750(720)/50p o o o o o o o --- --- --- --- --- --- --- o o
t
/
H
H
750(720)/60p o o o o o o o --- --- --- --- --- --- --- o o
H
D
M
H
D
1125(1080)/50i o o o o o o o --- --- --- --- --- --- --- o o
M
I
1125(1080)/60i o o o o o o o --- --- --- --- --- --- --- o o
CONNECTIONS (HDMI)
Set Top Box
DVD Player
Use only a fully compliant HDMI
cable(fully wired)
NOTES
If adding new equipment or re connecting equipment or changing setup, using
the TV/AV button on the remote control to select the correct connection (i.e.
HDMI1 or HDMI2). (See page 44)
SThis input terminal is not intended for use with computers.
S720p/1080i signals will be re--formatted to view on your display
SIf the external devices have aspect adjustment, set to 16:9
SFor applicable HDMI signals information see page 47
SNon--HDMI--compliant cables cannot be utilized.
SIt is recomm ended that you use Panasonic’s HDMI cable.
Recom mended part numbers:
RP--CDHG15 (1.5 m)
RP--CDHG30 (3.0 m)
RP--CDHG50 (5.0 m)