Instruction Book

5
Please use the apparatus only with the stands supplied or with the appropriate wall mount kits.
Receiver Location
Locate for comfortable viewing. Avoid placing where sunlight or other bright light (including reflections) will fall on the
screen.
Use of some types of fluorescent lighting can reduce remote control transmitter range.
Adequate ventilation is essential to prevent internal component failure. Keep away from areas of excessive heat or
moisture.
Optional External Equipment
The Video/Audio connection between components can be made with shielded video and audio cables. For best
performance, Antenna cables should utilize 75 Ohm coaxial shielded wire. Cables are available from your dealer or
electronic supply store.
Before you purchase any cables, be sure you know what type of output and input connectors your various components
require. Also determine the length of cable you’ll need.
For optimum quality picture
When the LCD is exposed to light from outdoors or lighting fixtures, high---contrast pictures may not be displayed clearly.
Turn off fluorescent lamps near the LCD and place in location not exposed to outdoor light.
How to use the LCD stand
Adjust the stand to your desired angle. The stand angle can be adjusted in the following directions:
20_ Right
20_ Left
20_
20_
5_ 10_
5_ Forward
10_ Backward
20_ Right
20_ Left
TX---23LXD60 only
TX---32/26/23LXD60
To c l ean thi s unit, wipe with a soft, dry cloth.
Wipe the cabinet with a soft cloth.
If the cabinet is heavily soiled, wipe with a well---wrung soft cloth dipped in kitchen cleanser
(neutral) diluted with water.
CAUTION:If water or similar substances get inside the monitor via the liquid crystal panel surface, a malfunction
may result.
If the surfaces are extremely dirty, use a soft cloth dipped in a soap and water solution or a weak
detergent solution.
D Use eyeglass cleaner to remove stubborn dirt from the LCD.
D Never use alcohol, paint thinner or benzine to clean this set.
D Before using a chemically treated cloth, carefully read the instructions that
came with the cloth.
D Do not wipe the LCD with water.
INSTALLATION
MAINTENANCE