Operating instructions

55
FAQs, etc.
•
On screen messages
•
Frequently Asked Questions
On screen messages
Feature not available
•
It is not possible to record these sources (COMPONENT / HDMI / PC).
Invalid system time. Please exit !
•
Cannot get the time information. Check the connection of the RF
cable.
Max. number of Timers already set !
•
The maximum number of timer programming events is 15.
New DVB Service Found!
Press OK start Auto Setup
Press EXIT to Ignore.
Selecting Auto Setup will delete
current Pro le and Childlock settings
•
There is a new DVB service or programme.
New version 1.90 found.
Do you really want to update the
software and reboot the system ?
Press OK to download the new version
Press EXIT to Ignore
•
There is a new software available.
No module inserted
•
Check the CI module inserted completely (p. 29).
No Recording - Check media
•
The tape or disc may be “write protected”, missing or damaged.
No Recording - Unknown reason
•
The recording may not be performed. Check the equipment.
•
Disc or tape may be full.
No Service
•
The broadcaster has stopped the service.
Bad Signal
•
The signal is weak. Check the aerial.
Are you sure you want to delete this timer ?
Press OK to delete timer
Press RETURN to return
•
Con rm correct operation.
Are you sure ?
•
Con rm correct operation.
All tuning data will be erased
•
“Shipping Condition” will erase all tuning data (p. 34).
•
“Auto Setup” will be erased all present DVB or Analogue tuning
datas (p. 33).
No Recording - Already recording
•
The equipment may already be recording.
Invalid operation - Please check settings and
connections
•
Check the Q-Link or VIERA Link connection and setting (p. 42 - 44).
Message Meaning / Action