Operating Instructions

4
Plug in aerial and connect ancillary equipment.
First, ensure that the VCR is in Standby mode.
Plug in TV and switch on.
Select your country.
Auto setup will begin, your stations will be located and stored.
Use the Programme Edit menu to delete unwanted stations
(see page 15).
Press the TV/AV button to exit.
Press the red button.
If you are installing a new Q---Link compatible VCR, you can now
switch it ON. Downloaded tuning data will match the television’s.
If you are installing a new
NEXT VIEWLINK compatible VCR, you will
need to initiate download manually.
See the VCR handbook for details.
D If the VCR has not accepted download data from the TV, you may need to select the Download option from the VCR’s menu.
D If Q---Link is not operating correct ly, check it is connected to the television’s AV2 socket, the SCART lead is a “full function” type, and
the VCR is compatible with Q---Link,
NEXT VIEWLINK or similar technologies. Ask your dealer for further details.
D For further information on Q ---Link and connec ting equipment, see pages 22, 27 and 28.
1
2
3
5
CH41
4
TV/AV
English Magyar Hrvatski
Čeština Russkij Bulgarian
Română SlovenskySlovensko
Polski Nemački
Select
Select
Exit
TV/AV
OSD language
Start ATP Manual tune
Prog. Chan. Name Lock Sys
1: CH41 XYZ Off SC2
2: -- Off SC2
3: -- Off SC2
4: -- Off SC2
5: -- Off SC2
Delete Add Move TV > VCR
Return --
Change
programme
Select
option
Exit
Store
TV/AV
STR
Programme edit
OR
VCR
SATELLITE RECEIVER
AV2
AV1
AV2
AV1
QUICK START GUIDE