TX-32AS500Y TX-39AS500Y TX-42AS500Y TX-50AS500Y e HJÆLP Dansk
min startskærm min startskærm • Information 10 • Betjening 11 • Indstillinger 12 • OSD-farve 13 APPS liste • Information 14 • Betjening 15 • Indstillinger 15 Ser Grundlæggende • Grundlæggende tilslutning 16 • Valg af kanal 19 • Informationsbanner 21 • Alternativmenu 23 • Undertekst 25 • Seneste visning 25 • Sluk timer 26 • Energibesparende funktioner 27 • Justerer klokkeslæt 29 • Sprog 29 Udvendigt udstyr • Ekstern tilslutning 30 • Visning fra ekstern indgang 33 • Betjening med tv’et
• Skærmformat 42 • Formatkontrolsignal 44 • Grundlæggende indstillinger 46 • Støjreduceringsindstillinger 47 • Avancerede indstillinger 48 • Indstillingsmuligheder 51 • Skærmindstillinger 53 • Kopier justering 54 For den bedste lyd • Lydtilstand 55 • Grundlæggende indstillinger 56 • Lydstyrkeindstillinger 57 • Talevejledning 58 • Lydbeskrivelse 59 • Avancerede indstillinger 60 TV Guide • Brug af TV-guide 63 Tekst-TV • Visning af tekst-tv 67 • Tekst-tv-tilstand 69 • Tekst-tv bogstaver 70 Ind
Medieafspiller Brug af Medieafspiller • Information 81 • Valg af enhed / tilstand 83 • Netværksenhed 85 Foto-tilstand • Vælg en fil 86 • Visning af billede 87 • Billedsortering 87 • Betjening af diasshow 88 Video-tilstand • Vælg en fil 92 • Afspilning af video 93 • Video opsætning 94 • Lydudgangsindstillinger 96 Musik-tilstand • Vælg en fil 97 • Afspilning af musik 98 • Musik opsætning 99 Teknisk information • Advarsel om håndtering af enhed 100 • USB-enhed 100 • Billedeformat
• Brug af DLNA 112 Netværksforbindelser • Internetforbindelse 113 • DLNA-forbindelse 114 • Bemærk 116 Netværksindstillinger • Netværksforbindelse 117 • Manuel - Trådløs 119 • Manuel - Kablet 121 • Manuel - Trådløst adgangspunkt 123 • Netværksstatus 124 • My Home Cloud indstilling 125 • VIERA navn 126 • TV Remote app-indst. 126 • Netværkslinkindst.
Teknisk information • Billedeformat 141 • Videoformat 142 • Musikformat 145 Funktioner VIERA Link “HDAVI Control™” • Resume af VIERA Link 146 • Forberedelser 150 • Nem afspilning 151 • Link strøm til 151 • Link strøm af 151 • Standby strømbesparelse 151 • Intelligent auto-standby 151 • VIERA Link Control 152 • Højttaler-valg 153 • Bemærk 154 Børnelås • Brug af børnelås 155 • PIN-kode 156 • Forældreklassificering 156 Datatjeneste applikation • Brug af dataserviceprogram 157 • Cookie 157 • Bemæ
• Manuel opdatering 163 Indstilling af tegn • Brug af numeriske taster 164 Tastatur • Tastatur 165 Indstillinger Indstillingsmenu • Betjening 166 Billede • Billedindstilling 168 • Grundlæggende indstillinger 168 • Omgivelsessensor 169 • Støjreduceringsindstillinger 169 • Avancerede indstillinger 169 • Indstillingsmuligheder 170 • Skærmindstillinger 171 • Kopier justering 172 • Gendan standard 172 Lyd • Lydindstilling 173 • Grundlæggende indstillinger 173 • Lydstyrkeindstillinger 174 • Talevej
• Netværkslinkindst.
Information • Brug af Hjælp-menuen 199 Ekstraudstyr • Kommunikationskamera 200 • Vægbeslag 200 Licens • Licens 201 OK Menu ●● Bogstaver i kasse henviser til knapper på fjernbetjeningen. Bogstaver i cyan henviser til emner i skærmmenuer. Referencer i denne eHJÆLP Billederne i denne eHJÆLP er kun til illustrationsformål.
min startskærm min startskærm Information “min startskærm” er porten til tv, applikationer osv. Den giver nem adgang til specialfunktioner såsom Medieafspiller, videoer, spil, kommunikationsværktøjer osv. som vist nedenfor (eksempel). HOME OK OK HOME Startskærm Valgt indholdsskærm (tv, applikation, osv.) Valg af startskærm – Din foretrukne Startskærm kan vælges eller tilføjes.
Betjening Startskærm giver adgang til specialfunktioner såsom Medieafspiller, tv, internetindhold, datatjenester, kommunikationsværktøjer osv. 1. Vis Startskærm med HOME. (Eksempel) ●● Den senest åbnede Startskærm vises når tv’et er tændt. ●● Tryk igen for at vælge eller tilføje dit foretrukne Startskærm layout. min startskærm > min startskærm > Indstillinger 2. Vælg en funktion med ●● / / / og tryk på OK for at opnå adgang.
Indstillinger Vælg opsætningsmenuen i værktøjsguiden øverst på skærmen. (Eksempel) ■■Valg af startskærm 1. Vis Valg af startskærm med HOME. (Eksempel) 2. Vælg skærmen med / og tryk på OK for at indstille. Fuldskærms-TV: Viser tv med fuld skærm. TV-startskærm: For at gøre tv-oplevelsen lettere og mere behagelig Livsstils-skærm: Viser tv med nyttige oplysninger og tjenester til hverdagen. Info-skærm: Nyd internetindhold mens du ser tv. ■■Indstill. Du kan tilpasse enhver Startskærm.
■■Søg Du kan søge efter indholdet via forskellige funktioner. 1. Vælg Søg fra værktøjsvejledningen. 2. Følg instruktionerne på skærmen. = Bemærk = ●● For at skifte farvetype for visninger på skærmen skal du indstille OSDfarve. min startskærm > min startskærm > OSD-farve ●● For at bruge denne funktion, skal du bruge et netværksmiljø med bredbånd. Sørg for at netværksforbindelserne og netværksindstillingerne er udført.
APPS liste Information Du får let adgang til forskellige applikationer (internetindhold, netværksindhold, Medieafspiller, osv.) fra APPS liste. ■■APPS liste (Eksempel) = Bemærk = ●● APPS liste kan ændres uden varsel.
Betjening Du har adgang til specialfunktioner, såsom internetindhold, netværksindhold, Medieafspiller, osv. fra APPS liste. 1. Vis APPS liste med APPS. (Eksempel) ●● For at forlade APPS liste EXIT 2. Vælg et funktions-ikon med adgang.
Ser Grundlæggende Grundlæggende tilslutning Bekræft venligst, at enheden er afbrudt fra lysnettet, inden du tilslutter eller afbryder nogen ledninger.
■■DVD-optager / VCR Terrestrisk / kabelterminal RF-kabel DVD-optager / VCR Terrestrisk antenne / Kabel AV1 (SCART) terminal SCART-kabel - 17 -
■■DVD-optager (VCR) / Sæt-top-boks HDMI-terminal HDMI-kabel Sæt-top-boks Parabolantenne AV1 (SCART) terminal SCART-kabel Terrestrisk / kabelterminal RF-kabel DVD-optager / VCR Terrestrisk antenne / Kabel = Bemærk = ●● Til VIERA Link tilslutninger Funktioner > VIERA Link “HDAVI Control™” > Resume af VIERA Link ●● Det viste eksterne udstyr og kabler følger ikke med dette fjernsyn. ●● Du bedes også læse brugervejledningen til det udstyr, der skal tilsluttes.
Valg af kanal 1. Vis TV valg med TV. 2. Vælg tilstanden med / og tryk på OK for at indstille. DVB-C / DVB-T / Analog ●● De tilstande, der kan vælges, varierer afhængigt af de gemte kanaler. ●● Du kan også ændre billedstørrelsen ved at trykke på TV flere gange. ●● Hvis TV valg menuen ikke vises, tryk på TV for at skifte tilstanden. 3. Vælg en kanal med Kanal op/ned eller Numeriske knapper. ●● Tryk på taltasterne for at vælge kanalposition med 2 eller flere cifre (f.eks.
■■Vælg en kanal ved hjælp af TV-Guiden 1. Vis TV Guide med GUIDE. 2. Vælg det aktuelle program med adgang. / / / og tryk på OK for at opnå – Det aktuelle program vises øverst til venstre på skærmen. 3. Tryk på OK for at afslutte TV Guide. Ser > TV Guide > Brug af TV-guide ●● Indtastningen af postnummeret eller opdateringen kan være nødvendig afhængigt af det pågældende land. Følg instruktionerne på skærmen.
Informationsbanner Vis informationsbanner med ●● . Kommer også frem, når der skiftes kanal. (Eksempel) Kanalposition og –navn Kanaltype (Radio, HDTV, osv.) / Krypteret kanal ( ) ) / TV-tilstand ( , , Program Programstart / sluttidspunkt (undtagen Analog) Kanalposition osv. (Analog) Statustidsindikator for det valgte program (undtagen Analog) Kategori ●● Ændring af kategorien (DVB) 1) Vis listen over kategorier med 2) Vælg kategorien med / (Blå). og tryk på OK for at ændre.
: Tekst-tv til rådighed : Multilyd til rådighed : Multivideo til rådighed : Multilyd og –video til rådighed Stereo, Mono: Lydfunktion : Data-service (Hybrid Broadcast Broadband TV-applikation) tilgængelig Funktioner > Datatjeneste applikation > Brug af dataserviceprogram 1 – 90: Tilbageværende tid på sluk-timer Ser > Grundlæggende > Sluk timer ●● Bekræftelse af en ny indstillet kanal / ●● Visning af den kanal, der står i banneret OK ●● Information om det næste program (DVB) ●● Skjul banneret EXIT
●● For at skifte farvetype for visninger på skærmen skal du indstille OSDfarve. min startskærm > min startskærm > OSD-farve ●● Sådan vises introduktionsbanneret for internettjenesten 1) Vis menuen med MENU. 2) Vælg Indstilling > Billedindstillinger > Smart Banner med på OK for at opnå adgang. 3) Vælg Til / Fra med / / og tryk og tryk på OK for at indstille. Alternativmenu Bekræft eller skift den aktuelle status. 1. Vis alternativmenuen med OPTION. 2. Vælg et af følgende produkter med adgang.
Multilyd Vælger mellem alternative sprog eller lydbeskrivelse for lydspor (hvis tilgængelig). ●● Denne indstilling gemmes ikke, og den vender tilbage til standardindstillingen, når du afslutter det aktuelle program. ●● For DVB 2-sproget lyd Vælger stereo / mono (hvis tilgængelig). ●● For DVB Underkanal Vælger multikanalprogrammet – underkanal (hvis tilgængelig). ●● For DVB Undertekstsprog Vælg sprog til undertekster (hvis tilgængelig).
Undertekst Vis/skjul undertekster (hvis tilgængelig) med STTL. ●● For at vælge det foretrukne sprog til DVB undertekster (hvis tilgængelig), indstil Foretruk. undertekst. Ser > Grundlæggende > Sprog ●● Sådan vælges den foretrukne underteksttype 1) Vis menuen med MENU. 2) Vælg Indstilling > Billedindstillinger > Undertekst(indstilling) med og tryk på OK for at opnå adgang. 3) Vælg Standard / Nedsat hørelse med indstille.
Sluk timer Sæt automatisk tv’et på standby efter et fastsat tidsrum med OFF TIMER. ●● Tryk gentagne gange indtil det ønskede klokkeslæt fremkommer. 0 / 15 / 30 / 45 / 60 / 75 / 90 (minutter) ●● For at annullere, indstil på 0 eller sluk for tv’et. ●● Den resterende tid vises på informationsbanneret. Ser > Grundlæggende > Informationsbanner ●● Hvis den resterende tid er under 3 minutter, vil den resterende tid blinke på skærmen. ●● Du kan også indstille klokkeslæt fra Sluk timer på timermenuen.
Energibesparende funktioner Fjernsynet kan gøres miljøvenligt vha. energibesparende funktioner. Fjernsynet vil automatisk gå i Standby under de følgende forhold: ●● Øko-navigation er indstillet til Øko-indstilling. ●● Sluk timer er aktiv. Ser > Grundlæggende > Sluk timer ●● Der foregår ingen handling i 4 timer, så længe Automatisk standby er indstillet på Til. ●● Der er ikke modtaget noget signal og ingen handling udført i 10 minutter, så længe Sluk ved intet signal er indstillet på Til.
■■Øko-navigation Indstiller automatisk tv’et til den mest energibesparende tilstand. De pågældende punkter og deres aktuelle indstillinger vises. Vælg Økoindstilling for at indstille dem til de energibesparende indstillinger samtidigt. 1. Vis menuen med MENU. 2. Vælg Indstilling > Øko-navigation med adgang. 3. Vælg Øko-indstilling med ●● / / og tryk på OK for at opnå og tryk på OK for at indstille.
Justerer klokkeslæt Indstiller tidsdata. 1. Vis menuen med MENU. 2. Vælg Timer > Tidszone med 3. Indstil med ●● / / og tryk på OK for at opnå adgang. og tryk på OK for at gemme. Tidsdata vil blive korrigeret, baseret på GMT (Greenwich Mean Time = Greenwich-tid) Sprog 1. Vis menuen med MENU. 2. Vælg Indstilling > Sprog med / og tryk på OK for at opnå adgang. 3. Vælg et af følgende produkter med adgang.
Udvendigt udstyr Ekstern tilslutning Disse diagrammer viser vores anbefalinger af tilslutning af dit fjernsyn til forskelligt udstyr. Til alle andre tilslutninger bedes du referere til brugsanvisningen, der medfølger med udstyret. ●● Grundlæggende tilslutning Ser > Grundlæggende > Grundlæggende tilslutning ●● Kontroller, at terminaltypen og kabelstikkene er korrekte ved tilslutning.
■■AV-enheder AV2 (COMPONENT) terminaler Komponentkabler DVD-afspiller AV2 (VIDEO) terminaler Kompositkabler Videokamera / Spiludstyr - 31 -
■■USB-enhed USB-port USB-kabel Kommunikationskamera = Bemærk = ●● Det anbefales at forbinde enheden direkte til fjernsynets USB-porte. ●● Visse USB-enheder eller USB HUB kan muligvis ikke anvendes med dette fjernsyn. ●● Du kan ikke tilslutte enheder ved hjælp af USB-kortlæser. ●● Yderligere oplysninger om enhederne kan eventuelt findes på følgende hjemmeside. http://panasonic.
■■Hovedtelefoner Stik til hovedtelefoner M3 stereo-ministik Hovedtelefoner ●● For at regulere lydstyrken, indstil Hovedtlf. Styrke. Ser > For den bedste lyd > Avancerede indstillinger ●● For at vælge lydudgangen, indstil Højttalerindstilling. Ser > For den bedste lyd > Lydstyrkeindstillinger Visning fra ekstern indgang Tilslut det eksterne udstyr (VCR, DVD, etc.) og det er muligt at se via indgangsbilledet. 1. Vis indgangsvælgermenuen med AV. 2.
= Bemærk = ●● Hvis det tilsluttede udstyr har en funktion for indstilling af skærmformatet, skal dette indstilles til 16:9. ●● For detaljer henviser vi til betjeningsvejledningen for udstyret, eller rådfør dig med din lokale forhandler. ■■Angiv etiketter Åbner listen med indgangsnavne for at navngive hver indgangstilstand eller indstille til at springe de ikke-tilsluttede over, og derved gøre identifikation og udvælgelse nemmere i TV valg, Inputvalg eller banner.
Betjening med tv’ets fjernbetjening Man kan betjene indholdet på Medieafspiller / medie-server, optagefunktioner eller forbundet udstyr med nedenstående knapper på tv’ets fjernbetjening.
■■Sådan ændrer man koden Hvert Panasonic-produkt har sin egen fjernbetjeningskode. Ændr venligst koden i overensstemmelse med det produkt, du vil betjene. 1. Tryk på Knappen Standby Til/Fra, og hold den nede under følgende betjeninger. 2. Indtast den passende kode ved hjælp af Numeriske knapper.
HDMI-funktioner HDMI (multimediegrænseflade med høj opløsningsevne) er verdens første, komplette digitalforbruger af AV-grænseflade, som er i overensstemmelse med en ikke-komprimeringsstandard. HDMI gør det muligt at opnå høj opløsningsevne på digitale billeder og højkvalitets-lyd via tilslutning af fjernsynet til udstyret.
■■DVI-tilslutning Hvis det eksterne udstyr kun har én DVI-udgang, skal det tilsluttes HDMIterminalen via et DVI til HDMI-adapterkabel. Når DVI- til HDMI-kablet anvendes, sluttes lydkablet til audio-indgangsterminalen (brug AV2 audioterminaler). ●● Forhør dig om HDMI-kabel hos den lokale forhandler af digitalt udstyr. = Bemærk = ●● Lydindstillinger kan udføres på HDMI indgang i menuen Lyd.
Terminalinformation ■■AV1 (SCART) terminal (RGB, VIDEO) 1 : 2 : 3 : 4 : 5 : 6 : 7 : 8 : 9 : 10: 11 : Audio ud (R) Audio ind (R) Audio ud (L) Audio jord Blå jord Audio ind (L) Blå ind Status CVBS Grøn jord -Grøn ind 12: 13: 14: 15: 16: 17: 18: 19: 20: 21: - 39 - -Rød jord Jord Rød ind Status RGB CVBS jord RGB status jord CVBS ud (video) CVBS ind (video) Jordstik
■■HDMI-terminal 1 : TMDS Data2+ 11 : TMDS clock-skjold 2 : TMDS Data2 afskærmning 12: TMDS ur− 3 : TMDS Data2− 13: CEC 4 : TMDS Data1+ 14: Hjælpeprogram 5 : TMDS Data1 afskærmning 15: SCL 6 : TMDS Data1− 16: SDA 7 : TMDS Data0+ 17: DDC/CEC jord 8 : TMDS Data0 afskærmning 18: +5V strøm 9 : TMDS Data0− 19: Detektion af varmt stik 10: TMDS ur+ Gyldige indgangssignaler ■■COMPONENT, HDMI Signalnavn COMPONENT HDMI 525 (480) / 60i, 60p ○ ○ 625 (576) / 50i, 50p ○ ○ 750 (720) / 60p, 50p
For bedste billede Billedindstilling 1. Vis menuen med MENU. 2. Vælg Billede > Billedindstilling med adgang. 3. Vælg tilstanden med / / og tryk på OK for at opnå og tryk på OK for at indstille. Billedindstilling (Dynamisk / Normal / Biograf / True Cinema / Brugerdefineret) Vælger din favoritbilledtilstand for hver indtastning. Dynamisk: Forbedrer kontrast og skarphed til visning i et lyst lokale.
Omgivelsessensor 1. Vis menuen med MENU. 2. Vælg Billede > Omgivelsessensor med adgang. 3. Vælg Til / Fra med / / og tryk på OK for at opnå og tryk på OK for at indstille. Omgivelsessensor (Til / Fra) ●● Funktion til automatisk lysstyrkekontrol Justerer billedindstillinger automatisk afhængig af de omgivende lysforhold. Skærmformat Ændring af skærmformat (billedstørrelse) ved hjælp af ASPECT. ■■For at ændre formatforholdet manuelt 1. Vis Valg af skærmformat med ASPECT. 2.
Sidecut Tilpasset: Viser et 16:9 letterbox-billede (anamorfisk) i fuld skærm. Stræk er kun synligt i venstre og højre kanter. ●● Til HD (High definition) signaler Sidecut Zoom: Viser et 16:9 letterbox-billede (anamorfisk) på fuld skærm uden forvrængning. ●● Til HD (High definition) signaler = Bemærk = ●● Vis billedet (tv, eksternt input, osv.) i fuld skærm for at udnytte denne funktion optimalt.
Formatkontrolsignal Programmer indeholder normalt et “Aspect Control Signal”. (Bredskærmsformat, kontrolsignal via SCART / HDMI-terminal) I Automatisk tilstanden, aspekt tilstand fremkommer øverst til venstre på skærmen, hvis der findes et signal for bredskærmformat (WSS) eller et kontrolsignal gennem SCART (pin8) / HDMI-terminalen. Indstillingen skifter automatisk til et passende forhold.
●● AV2 (KOMPONENT) terminaler (kun WSS) Gyldigt indgangssignalformat: 625 (576) / 50i, 50p Ugyldigt indgangssignalformat: 525 (480) / 60i, 60p 750 (720) / 60p, 50p 1 125 (1 080) / 60i, 50i ●● HDMI-terminal Gyldigt indgangssignalformat: 525 (480) / 60i, 60p 625 (576) / 50i, 50p 750 (720) / 60p, 50p 1 125 (1 080) / 60i, 50i 1 125 (1 080) / 60p, 50p, 24p ●● HDMI-terminal modtager ikke noget WSS-signal.
Grundlæggende indstillinger 1. Vis menuen med MENU. 2. Vælg Billede med / og tryk på OK for at opnå adgang. 3. Vælg et af følgende produkter med adgang. / og tryk på OK for at opnå Baggrundsbelysning / Kontrast / Lys / Farve / Nuance / Skarphed / Farvetemperatur / Levende farve / Adaptiv baglyskontrol 4. Vælg / med / og tryk på OK for at gemme. Baggrundsbelysning, Kontrast, Lys, Farve, Nuance, Skarphed Juster niveauerne for disse muligheder i overensstemmelse med dine personlige præferencer.
Støjreduceringsindstillinger 1. Vis menuen med MENU. 2. Vælg Billede > Støjreduktion / MPEG støjreduktion med OK for at opnå adgang. 3. Indstil med / / , og tryk på og tryk på OK for at gemme. Støjreduktion (Automatisk / Maksimum / Middel / Minimum / Fra) Reducerer uønskede billedeforstyrrelser.
Avancerede indstillinger Du kan justere og opsætte de detaljerede billedindstillinger, når Billedindstilling er indstillet til Biograf, True Cinema eller Brugerdefineret. Indstillingerne i True Cinema eller Brugerdefineret tilstand kan gemmes for hver indgang. Ser > For bedste billede > Billedindstilling 1. Vælg indgangstilstanden med AV eller TV. 2. Vis menuen med MENU. 3. Vælg Billede > Billedindstilling med adgang. 4. Vælg tilstanden med / / og tryk på OK for at opnå og tryk på OK for at indstille.
■■Kontrastregulering Kontrastregulering (Automatisk / Custom / Fra) Justerer automatisk de detaljerede kontrastindstillinger. Vælg Custom for at indstille Kontrastindstilling manuelt. Kontrastindstilling Adaptiv gammaregulering: Justerer gamma-kurven for at gøre billedet lysere. Sort-udvidelse: Justerer gradvist de sorte skygger. Gendan standard: Nulstil elementer for Kontrastindstilling. ■■Hvidbalance R-gain / G-gain / B-gain Justerer hvidbalancen på de klare røde / grønne / blå områder.
■■Farvestyring R-tone / R-mætning / R-luminans Justerer billednuance / mætning / lysstyrke for de røde områder. G-tone / G-mætning / G-luminans Justerer billednuance / mætning / lysstyrke for de grønne områder. B-tone / B-mætning / B-luminans Justerer billednuance / mætning / lysstyrke for de blå områder. Gendan standard Nulstil Farvestyring for at gendanne standardindstillinger. ■■Gamma Gamma Skifter gamma-kurven. ●● Bemærk venligst, at de numeriske værdier bruges som reference for justeringen.
Indstillingsmuligheder 1. Vis menuen med MENU. 2. Vælg Billede > Indstillingsmuligheder med opnå adgang. 3. Vælg et af følgende produkter med adgang. / / og tryk på OK for at og tryk på OK for at opnå Film-kadence indstilling / 1080p Pixel Direct / HDMI indholdstype / HDMI RGB-område / AV-farvesystem / 3D-COMB 4. Indstil med / og tryk på OK for at gemme. Film-kadence indstilling (Til / Fra) Forbedrer lodret opløsning til visning af filmbilleder.
HDMI RGB-område (Auto / Fuld / Normal) Justerer det sorte billedeniveau for hver HDMI-indgang. ●● Når det sorte niveau ikke er passende, vælges Fuld. ●● Til HDMI-indgang AV-farvesystem (Automatisk / PAL / SECAM / M.NTSC / NTSC) Vælger valgfrit farvesystem baseret på videosignaler. ●● Til AV-indgang 3D-COMB (Til / Fra) Får stillbilleder eller billeder i langsom bevægelse til at se mere levende ud.
Skærmindstillinger 1. Vis menuen med MENU. 2. Vælg Billede > Skærmindstillinger med adgang. / 3. Vælg et af følgende produkter med adgang. og tryk på OK for at opnå / og tryk på OK for at opnå 16:9 Overscan / Vandret størrelse / Zoomjusteringer / Skærmvisning 4. Indstil med / og tryk på OK for at gemme. 16:9 Overscan (Til / Fra) Vælger skærmarealet, der viser billedet i 16:9 skærmformat. Til: Forstørrer billedet for at skjule kanten af billedet. Fra: Viser billedet i dets oprindelige størrelse.
Skærmvisning (Til / Fra) Slukker for skærmen, når du vælger Fra. Denne funktion er effektiv til reduktion af strømforbruget, når man lytter til lyd uden at se fjernsynsskærmen. ●● Tryk på en vilkårlig knap (undtagen Knappen Standby Til/Fra) for at tænde for skærmen. Kopier justering Kopierer billedeindstillingerne til True Cinema eller Brugerdefineret til dem fra en anden indgang eller anden visningstilstand. 1. Vis menuen med MENU. 2.
For den bedste lyd Lydtilstand 1. Vis menuen med MENU. 2. Vælg Lyd > Lydindstilling med 3. Vælg tilstanden med / / og tryk på OK for at opnå adgang. og tryk på OK for at indstille. Lydindstilling (Standard / Musik / Tale / Bruger) Vælger din favoritlydtilstand for hver indtastning. Standard: Giver passende lydkvalitet til alle slags kulisser. Musik: Forbedrer lydkvaliteten til visning af musikvideoer, osv. Tale: Forbedrer lydkvaliteten til visning af nyheder, drama, osv.
Grundlæggende indstillinger 1. Vis menuen med MENU. 2. Vælg Lyd med / og tryk på OK for at opnå adgang. 3. Vælg et af følgende produkter med adgang. / og tryk på OK for at opnå Bas / Diskant / Equalizer / Balance / Surround 4. Vælg / med / og tryk på OK for at gemme. Bas Justerer niveauet for at forøge eller reducere det lavere, dybere lyd-output. Diskant Justerer niveauet for at forøge eller reducere det skarpere, højere lyd-output.
Lydstyrkeindstillinger 1. Vis menuen med MENU. 2. Vælg Lyd med / og tryk på OK for at opnå adgang. 3. Vælg et af følgende produkter med adgang. / og tryk på OK for at opnå Højttalerindstilling / Hovedtlf. Styrke / Automatisk gainkontrol / Lydregulering / TV afstand til væggen 4. Vælg / med / og tryk på OK for at gemme. Højttalerindstilling (TV-højttaler / Hovedtelefoner / Fra) Vælger fjernsynshøjtalere eller høretelefoner til lydudgang. Indstil til Fra ved brug af de eksterne højttalere.
Talevejledning 1. Vis menuen med MENU. 2. Vælg Lyd > Talevejledning med / 3. Vælg et af følgende produkter med adgang. og tryk på OK for at opnå adgang. / og tryk på OK for at opnå Talevejledning / Hastighed / Lydstyrke / Sprog / Brugerniveau / Webbrowser 4. Vælg / med / og tryk på OK for at gemme. Talevejledning (Til / Fra) Indstil på Til for at aktivere lydguiden til de grundlæggende funktioner (menupunkter, meddelelser på skærmen osv.) for synshæmmede brugere.
Lydbeskrivelse 1. Vis menuen med MENU. 2. Vælg Lyd > Lydbeskrivelse med / 3. Vælg et af følgende produkter med adgang. og tryk på OK for at opnå adgang. / og tryk på OK for at opnå Foretrukne lydtype / Lydstyrke / Højttalere / Hovedtelefoner 4. Vælg / med / og tryk på OK for at gemme. Foretrukne lydtype (Standard / Lydbeskrivelse) Fortællingsindstillinger til brugere med nedsat syn Indstil til Lydbeskrivelse for at aktivere fortællerlydsporet på programvisningen, når det er tilgængeligt.
Avancerede indstillinger 1. Vis menuen med MENU. 2. Vælg Lyd med / og tryk på OK for at opnå adgang. 3. Vælg et af følgende produkter med adgang. / og tryk på OK for at opnå MPX / Lydindstilling / SPDIF-valg / SPDIF forsinkelse / HDMI indgang 4. Indstil med / og tryk på OK for at gemme. MPX Vælger multipleks lydtilstand (hvis tilgængelig). Stereo: Brug denne normalt. Mono: Når stereosignalet ikke kan modtages M1 / M2: Tilgængelig mens mono-signalet bliver transmitteret.
●● HE-AAC er en perceptuel kodningsmetode til komprimering af digital lyd for effektiv lagring og transmission. ●● MPEG er en lydkomprimeringsmetode, som trykker lyd sammen til en mindre størrelse uden noget betydeligt tab af lydkvaliteten. ●● Dolby Digital Plus og HE-AAC er teknologier til HD (høj opløsningsevne) programmer. ●● For DVB SPDIF-valg (Automatisk / PCM) Vælger initialiseringsindstillingen for digitalt lydudgangssignal fra terminalerne DIGITAL AUDIO og HDMI2 (ARC-funktion).
HDMI indgang (Digital / Analog) Vælger et passende indgangssignal.
TV Guide Brug af TV-guide TV Guide - Elektronisk Program Guide (EPG) giver en skærmliste over de programmer, der sendes aktuelt, og de udsendelser, der vil blive sendt i løbet af de næste syv dage (afhængigt af sendestationerne). 1. Vis TV valg med TV. 2. Vælg tilstanden med / og tryk på OK for at indstille. DVB-C / DVB-T / Analog 3. Vis TV Guide med GUIDE. ●● Tryk igen for at ændre layoutet. (Liggende / Stående) – Vis Liggende for at se flere kanaler. – Vis Stående for at se én kanal ad gangen.
(Eksempel) TV-skærm Dato Klokkeslæt Program D (DVB-T) / A (Analog) Kanalposition og –navn ●● For at se programmet 1) Vælg det aktuelle program med / / / . – Det aktuelle program vises øverst til venstre på skærmen. 2) Tryk på OK for at se. ●● Til den foregående dag (DVB) (Rød) ●● Til den næste dag (DVB) (Grøn) ●● For at få vist kanallisten for den valgte type 1) Vis listen over typer med 2) Vælg typen med / (Gul). og tryk på OK for at få vist.
●● For at søge i programtitler og vise en liste over de søgte programmer (DVB) (hvis tilgængelig) 1) Vis søgelisten med (Gul). 2) Vælg Søgning med 3) Indtast tegn med / / og tryk på OK for at opnå adgang. / / , og tryk på OK for at indstille – Du kan vælge tegn ved at bruge Numeriske knapper. Funktioner > Indstilling af tegn > Brug af numeriske taster 4) Tryk på (Grøn) for at starte søgning. – Alle programtitler, der indeholder dit indstillede ord, vil blive vist.
= Bemærk = ●● Når der tændes for dette fjernsyn for første gang, eller hvis fjernsynet er slukket i mere end en uge, kan det tage nogen tid, inden TV Guide vises extenso. ●● Denne funktion varierer afhængigt af landet, du vælger. ●● Indtastningen af postnummeret eller opdateringen kan være nødvendig for at anvende GUIDE Plus+ systemet afhængigt af det valgte land. 1) Vis menuen med MENU. 2) Vælg Indstilling > Andre indstillinger > GUIDE Plus+ indstillinger med / og tryk på OK for at opnå adgang.
Tekst-TV Visning af tekst-tv 1. Skift til tekst-tv med TEXT. ●● Viser indekssiden (indholdet varierer afhængigt af sendestationerne). ●● Aktuelle / undersidenumre bliver vist øverst til venstre på skærmen. ●● Klokkeslæt / dato bliver vist øverst til højre på skærmen. ●● Farvejusteringen bliver vist nederst på skærmen. 2. Vælg siden med Numeriske knapper, (farvede knapper). ●● / eller Regulering af kontrast 1) Tryk på MENU tre gange for at vise Kontrast.
■■Se fjernsyn og tekst-tv samtidigt i to vinduer 1. Tryk på MENU to gange. 2. Indstil Billede og tekst til Til / Fra med ●● / . Betjeninger kan kun udføres på Tekst-tv skærmen. ■■Gem hyppigt viste sider på farvebjælken (kun Liste-tilstand) 1. Tryk på (farvede knapper) mens siden bliver vist. 2. Tryk og hold OK nede. ●● Tallet på den gemte side bliver hvidt. ●● Ændring af gemte sider 1) Tryk på (farvede knapper) for at ændre. 2) Indtast et nyt sidenummer med Numeriske knapper.
Tekst-tv-tilstand Tekst-tv service er den tekstinformation, som leveres af sendestationerne. ●● Denne funktion kan variere, afhængigt af sendestationerne. 1. Vis menuen med MENU. 2. Vælg Indstilling > Billedindstillinger > Tekst-TV med for at opnå adgang. 3. Vælg TOP (FLOF) / Liste med / / og tryk på OK og tryk på OK for at indstille. ■■FLOF (FASTEXT) tilstand I FLOF-funktionen vises fire forskelligt farvede emner nederst på skærmen.
Tekst-tv bogstaver Vælger skrifttype for tekst-tv. 1. Vis menuen med MENU. 2. Vælg Indstilling > Billedindstillinger > Tekst-tv bogstaver med tryk på OK for at opnå adgang. 3. Vælg fonten med / / og , og tryk på OK for at indstille. Vest: Engelsk, fransk, tysk, græsk, italiensk, spansk, svensk, tyrkisk, osv. Oest1: Tjekkisk, engelsk, estisk, lettisk, rumænsk, russisk, ukrainsk, osv. Oest2: Tjekkisk, ungarsk, lettisk, polsk, rumænsk, osv.
Indstilling på og redigering af kanaler Indstillingsmenu Du kan genindstille kanaler eller oprette en liste med dine favoritkanaler, springe uønskede kanaler over osv. 1. Vis TV valg med TV. 2. Vælg tilstanden med / og tryk på OK for at indstille. DVB-C / DVB-T / Analog 3. Vis menuen med MENU. 4. Vælg Indstilling > Indstillingsmenu med adgang. / og tryk på OK for at opnå DVB-C indstillingsmenu / DVB-T indstillingsmenu / Analog indstillingsmenu ●● Menu-navnet afhænger af TV-tilstand. 5.
Rediger favoritter ■■Liste med DVB-favoritkanaler Lav en liste med dine favoritkanaler fra forskellige sendestationer (op til 4: Favoritter 1 til 4). DVB-favoritlisterne er til rådighed fra Kategori på informationsbanneret og TVGuide skærmen. Ser > Grundlæggende > Informationsbanner Ser > TV Guide > Brug af TV-guide 1. Vælg Rediger favoritter med / og tryk på OK for at opnå adgang. 2. Vælg en kanal fra alle DVB-kanaler med ●● ●● / . fremkommer, når kanalen er krypteret.
■■Rediger DVB-favoritliste Du kan redigere dine favoritlister, mens cursoren er på kanalen i favoritlisten. ●● Flytning af kanalen 1) Vælg kanalen med 2) Tryk på / . (Grøn). 3) Vælg den nye position med 4) Tryk på ●● / eller Numeriske knapper. (Grøn) for at gemme. Sletning af kanalen 1) Vælg kanalen med / . 2) Tryk på OK for at slette. – Tryk på ●● (Gul) for at slette alle kanaler. Navngivning af favoritterne 1) Tryk på (Rød).
Kanalliste ■■Spring over uønskede DVB / Analog kanaler Du kan skjule (spring over) uønskede kanaler. De skjulte kanaler kan kun vises i denne funktion. 1. Vælg Kanalliste med 2. Vælg en kanal med / / og tryk på OK for at opnå adgang. . 3.
●● For at give kanalen et nyt navn (Analog) 1) Tryk på (Blå) for at redigere. 2) Indtast tegn (højst 5 tegn) med og tryk på OK for at indstille. / / / eller Numeriske knapper, 3) Tryk på BACK/RETURN for at gemme. = Bemærk = ●● Hvis en videobåndoptager er tilsluttet udelukkende med RF-kablet i Analog tilstand, bedes du redigere VCR.
Autosøgning Genindstiller automatisk alle de modtagne kanaler i området. ●● Denne funktion er til rådighed, hvis der allerede er udført kanalindstilling. ●● Kun den valgte tilstand genindstilles. Alle de tidligere kanalindstillinger slettes. ●● Hvis en børnelåst PIN-kode er blevet indstillet, skal den indtastes nu. Funktioner > Børnelås > PIN-kode ●● Hvis indstillingen ikke er helt færdig Manuel søgning. Ser > Indstilling på og redigering af kanaler > Manuel søgning ■■DVB-C, DVB-T, Analog 1.
■■Autosøgning anvendes knapperne på tv’et 1. Tryk og hold INPUT/OK/HOLD for MENU-knappen i ca. 3 sekunder for at vise hovedmenuen. 2. Indstil Autosøgning med følgende kontrolpanelknapper.
■■Analog Indstil analog kanal manuelt efter Autosøgning. ●● Indstil Lydsystem og Farvesystem, og udfør derefter denne funktion. Indstil normalt Farvesystem til Automatisk. – SC1: PAL B, G, H / SECAM B, G – SC2: PAL I – SC3: PAL D, K / SECAM D, K – F: SECAM L, L’ 1. Vælg kanalpositionen med Numeriske knapper. 2. Vælg kanalen med Kanal op/ned. 3. Søg med / 4. Vælg Gem med . / og tryk på OK for at indstille.
Ny kanalmeddelelse Vælger om der skal sendes en notifikationsmeddelelse, når en DVB-kanal enten bliver fundet eller ikke fundet. ●● Når der fremkommer en meddelelse, kan du udføre Opdatering af kanalliste ved at trykke på OK. Signaltilstand Vælger en kanal og kontrollerer signaltilstanden. En god signalstyrke er ikke nogen indikation af, at signalet er velegnet til DVB-modtagelse.
Andre indstillinger Foretrukken TV-udbyder Vælger dit foretrukne netværk for hver sendestation (kun tilgængeligt i visse lande). ●● Til DVB-C, DVB-T Alternativ tjeneste (Til / Fra) Indstil til Til for at gøre det muligt for en meddelelse at skifte til den tilgængelige service (kun tilgængelig i visse lande). ●● DVB-C Niveaudæmper (Til / Fra) Indstiller antennesystemet til at bruge flere LNB’er til modtagelse af adskillige satellitter.
Medieafspiller Brug af Medieafspiller Information Medieafspilleren muliggør, at du kan nyde fotos, video eller musik, der er optaget på USB flash-hukommelse / netværksenhed. (Eksempel) Foto-tilstand: Stillbilleder, der er optaget med digitalkameraer, vil blive vist. Video-tilstand: Der afspilles billeder i bevægelse optaget med digitale videokameraer og digital videodata. Musik-tilstand: Digitale musikdata afspilles.
■■Sådan isættes eller udtages USB flash-hukommelsen Sørg for at justeringen er lige og komplet, under indsættelse eller fjernelse. ●● For at fjerne USB flash-hukommelsen sikkert fra tv’et, foretag Sikker fjernelse i USB-enhedsopsætning. 1) Vis menuen med MENU. 2) Vælg Indstilling > USB-enhedsopsætning med at opnå adgang. 3) Vælg enheden med / , og tryk på / og tryk på OK for (Gul) for at indstille. = Bemærk = ●● Kontrollér, at terminaltypen og enhederne er korrekte ved tilslutning.
Valg af enhed / tilstand 1. Isæt USB flash-hukommelsen i tv’et. Medieafspiller > Brug af Medieafspiller > Information ●● Kontrollér, at forbindelsen og indstillingerne er udført for at afspille indhold på netværksenheden. Medieafspiller > Brug af Medieafspiller > Netværksenhed 2. Vis APPS liste med APPS. 3. Vælg Medieafspiller med adgang. 4. Vælg enheden med / / / / og tryk på OK for at opnå og tryk på OK for at opnå adgang. ●● Hvis der kun er tilsluttet en enhed, springes dette trin over.
= Bemærk = ●● Du kan også opnå direkte adgang til hver tilstand fra APPS liste. min startskærm > APPS liste > Betjening ●● Vælg den passende enhed og det passende indhold til afspilning af hver fil. ●● Du kan benytte følgende knapper under afspilning. Bekræft at koden til fjernbetjening er “73”. Ser > Udvendigt udstyr > Betjening med tv’ets fjernbetjening ■■For at skifte enhed Du kan ændre den aktuelle enhed til en anden enhed direkte i samme tilstand, hvis to eller flere enheder er tilsluttet. 1.
Netværksenhed Du kan nyde fotos, video eller musik lagret på netværksenhederne. ●● For at aktivere denne funktion, skal du tilslutte dette fjernsyn til dit private netværk. Netværk > Netværksforbindelser Netværk > Netværksindstillinger ■■Sådan indstilles Bruger / Adgangskode 1. Vis menuen med MENU. 2. Vælg Netværk > Fildeling indstillinger > Liste over netværksenheder med / og tryk på OK for at opnå adgang. 3. Vælg netværksenheden med / , og tryk på OK for at opnå adgang. 4.
Foto-tilstand Vælg en fil Vælg billede i miniaturevisning med / / / og tryk på OK for at se. : Fejlvisning ●● Ændring af størrelsen af billeder på en thumbnail-skærm 1) Vis alternativmenuen med OPTION. 2) Vælg Skift størrelse med ●● / og tryk på OK for at ændre.
Visning af billede ■■Afspilning ●● Betjening i Enkelt billede : Til det foregående billede : Til det næste billede : Stop (gå tilbage til miniaturevisning) OK : Slide Show ●● For at vise / skjule betjeningsvejledningen ●● For at rotere 90 ° (Blå) ●● For at vende tilbage til miniature BACK/RETURN Billedsortering ■■Sortering efter mappe, dato eller måned for optagelse 1. Vis muligheder for visningsvalg i miniaturevisning med (Grøn). 2.
Betjening af diasshow Diasshow slutter, når alle billeder på den aktuelle thumbnail er blevet vist. 1. Vælg filen fra thumbnails for første visning med 2. Start diasshow med / / / . (Rød) og OK. ●● For at vise / skjule betjeningsvejledningen ●● Midlertidig afbrydelse (tilbage til Enkelt billede) OK ●● For at vende tilbage til miniature BACK/RETURN ●● Du kan ændre baggrundsmusikken ved at vælge indstillingen Baggrundsmusik i Slideshow-indstillinger (se nedenfor).
Galleri(+kalender) / Galleri: Der vises forskellige størrelser billeder i rammen. ●● Du kan vælge, om kalenderen skal vises eller ej. Kalendermåneden / . ændres med Biograf: Billeder vises som gamle film (farvetonen sepia). Farveeffekt (Fra / Sepia / Gråtoner) Vælg farveeffekten for foto. ●● Gælder ikke når Ramme er indstillet på Drift, Galleri eller Biograf Overgangseffekt (Fra / Fade / Dissolve / Bevægelse / Random) Vælger overgangseffekten for skift af billeder under diasshow.
Skærmindstilling (Normal / Zoom) Vælger forstørret eller normal visning. ●● Gælder ikke når Ramme er indstillet til Kollage, Drift, Galleri, Biograf, eller når Overgangseffekt er indstillet til Bevægelse ●● Afhængigt af billedstørrelsen kan det muligvis ikke forstørres helt til at udfylde skærmen (f.eks. portrætbillede). Kontinuerlig gengivelse (Til / Fra) Vælger om billedet skal vises kontinuerligt i et hurtigt diasshow eller ej.
Baggrundsmusik (Fra / Type 1 / Type 2 / Type 3 / Type 4 / Type 5 / Bruger / Automatisk) Vælger baggrundsmusikken under Billede-tilstand. Type 1 - 5: Musikfiler, der er installerede på dette tv med fabriksindstillinger, vil blive afspillet. Automatisk: Musikdata, der er gemt på den aktuelle enhed, vil blive afspillet. ●● Hvis der ikke er tilgængelige musikdata, vil der ikke blive afspillet nogen lyd. Bruger: Musikdata på enheden registreret af dig selv vil blive afspillet.
Video-tilstand Vælg en fil 1. Vælg titlen i miniaturevisning med / / / . : Fejlvisning : Filen understøtter ikke miniaturevisning. ●● Forhåndsvisningen vil starte, når titlen / scenen markeres i thumbnailvisningen, hvis den understøtter en forhåndsvisning. Deaktivering af forhåndsvisningen, vælg Video Preview til Fra. Medieafspiller > Video-tilstand > Video opsætning 2. Start afspilning med ●● ●● (Rød).
Afspilning af video ■■Afspil fra den valgte scene i titlen Afspilningen starter fra den valgte scene til slutningen af titlen. 1. Vælg titlen med / 2. Vælg scenen med / / / 3. Start afspilning med og tryk på OK for at opnå adgang. / / . (Rød). ●● Strukturen af titler eller scener kan variere afhængigt af det anvendte digitalvideokamera. ●● Afspilning vil eventuelt ikke fortsætte afhængigt af tilstanden.
●● Ændring af formatforholdet 1) Vis Valg af skærmformat med ASPECT. 2) Vælg tilstanden med / og tryk på OK for at indstille. Aspekt1: Viser indholdet på hele skærmen uden forvrængning. Aspekt2: Viser indholdet på hele skærmen. Original: Viser indholdet i dets oprindelige størrelse. – Du kan også ændre billedstørrelsen ved at trykke på ASPECT. (Tryk gentagne gange, indtil du har nået den ønskede indstilling.) – Skærmformatet kan ikke ændres afhængig af indholdet.
Multilyd, Dobbelt monolyd Gør det muligt at vælge mellem tilgængelige lydspor (hvis de er til rådighed). ●● Det kan tage flere sekunder at ændre lyden. ●● Denne funktion er tilgængelig under afspilning. Undertekst Vis/skjul undertekster (hvis tilgængelig). ●● Denne funktion er tilgængelig under afspilning. Undertekst Vælger skrifttype til korrekt visning af undertekster (hvis tilgængeligt). ●● Denne funktion er tilgængelig under afspilning.
Lydudgangsindstillinger ●● For at bekræfte eller ændre den aktuelle lydstatus Medieafspiller > Video-tilstand > Video opsætning 1. Vis menuen med MENU. 2. Vælg Lyd > SPDIF-valg med / og tryk på OK for at opnå adgang. 3. Vælg Automatisk / PCM med / og tryk på OK for at indstille. SPDIF-valg (Automatisk / PCM) Vælger initialiseringsindstillingen for digitalt lydudgangssignal fra terminalerne DIGITAL AUDIO og HDMI2 (ARC-funktion). ●● SPDIF er et standardformat til overførelse af lydfiler.
Musik-tilstand Vælg en fil 1. Vælg mappen i miniaturevisning med 2. Start afspilning med ●● / / / . (Rød).
Afspilning af musik ■■Afspilning af den valgte fil i mappen 1. Vælg mappen med / / / 2. Vælg filen med / / . / 3. Start afspilning med og tryk på OK for at opnå adgang. (Rød). ■■Afspilning ●● Betjening af afspilning : Spol tilbage : Hurtigt frem : Stop OK : Afbryd (viser tidssøgningsbarren) / Afspilning ●● For at springe til det specificerede tidspunkt 1) Vis tidssøgningsbarren med OK.
Musik opsætning Opsæt indstillingerne for Musik-tilstand. ●● Denne funktion er tilgængelig i thumbnail-visningen. 1. Vis alternativmenuen med OPTION. 2. Vælg Musik opsætning > Gentag med OK. 3. Vælg Mappe / En / Fra med / og tryk på OK for at indstille.
Teknisk information Advarsel om håndtering af enhed ●● Data ændret med en PC vises muligvis ikke. ●● Tag ikke enheden ud, mens fjernsynet er ved at tilgå data. Ellers kan det beskadige enheden eller tv’et. ●● Rør ikke ved stikbenene på enheden. ●● Udsæt ikke enheden for kraftige tryk eller slag. ●● Isæt enheden i den rigtige retning. Ellers kan det beskadige enheden eller tv’et. ●● Elektrisk interferens, statisk elektricitet eller fejlagtig betjening kan bevirke, at data eller enhed beskadiges.
Billedeformat ■■Understøttede fotoformater ●● JPEG (.jpg, .jpeg) Sub-sampling: 4:4:4, 4:2:2, 4:2:0 Billedopløsning (pixel): 8 × 8 til 30 719 × 17 279 ●● DCF- og EXIF-standarder ●● Progressiv JPEG understøttes ikke. = Bemærk = ●● Nogle filer kan muligvis ikke afspilles, selvom de overholder disse betingelser. ●● Brug ikke tegn på flere bytes eller andre specialkoder til filnavne. ●● Enheden kan muligvis ikke anvendes med dette tv, hvis fil- eller mappenavnene ændres.
Videoformat ■■Understøttede videoformater ●● AVI (.avi) Video-codec: H.264 BP/MP/HP, MPEG1, MPEG2, MPEG4 SP/ASP, VC-1, Windows Media Video Ver. 9 Lyd-codec: AAC, ADPCM, Dolby Digital, Dolby Digital Plus, DTS-kerne, HE-AAC, LPCM, MPEG Audio, MP3, WMA, WMA Pro ●● Nogle undertekster eller kapitelfunktioner er måske ikke tilgængelige. ●● MP4 (.f4v, .m4v, .mp4) Video-codec: H.
●● ASF (.asf, .wmv) Video-codec: MPEG4 SP/ASP, VC-1, Windows Media Video Ver. 9 Lyd-codec: AAC, Dolby Digital, Dolby Digital Plus, HE-AAC, LPCM, MP3, WMA, WMA Pro ●● Kopibeskyttede filer kan ikke afspilles. ●● FLV (.flv) Video-codec: H.264 BP/MP/HP Lyd-codec: AAC, MP3 ●● 3GPP (.3gp, .3g2) Video-codec: H.264 BP/MP/HP, MPEG4 SP/ASP Lyd-codec: AAC, HE-AAC ●● PS (.mod, .mpg, .mpeg, .vob, .vro) Video-codec: H.
■■Understøttede undertekstformater ●● MicroDVD, SubRip, TMPlayer (.srt, .sub, .txt) ●● Videofilen og undertekstfilen ligger i den samme mappe, og filnavnene er de samme, bortset fra filendelserne. ●● Hvis der er mere end én undertekstfil i den samme mappe, vises de i følgende prioritetsorden: “.srt”, “.sub”, “.txt”. = Bemærk = ●● Nogle filer kan muligvis ikke afspilles, selvom de overholder disse betingelser. ●● Brug ikke tegn på flere bytes eller andre specialkoder til filnavne.
Musikformat ■■Understøttede musikformater ●● MP3 (.mp3) ●● AAC (.m4a) ●● Kopibeskyttede filer kan ikke afspilles. ●● FLAC (.flac) ●● WMA / WMA Pro (.wma) ●● Kopibeskyttede filer kan ikke afspilles. ●● WMA Lossless understøttes ikke. ●● LPCM (.wav) = Bemærk = ●● Nogle filer kan muligvis ikke afspilles, selvom de overholder disse betingelser. ●● Brug ikke tegn på flere bytes eller andre specialkoder til filnavne.
Netværk Internetindhold Information Du har adgang til visse specifikke websteder, der understøttes af Panasonic, og mulighed for at opleve internetindhold, som f.eks. videoer, spil, kommunikationsværktøjer osv. fra APPS liste. (Eksempel) ●● For at bruge denne funktion, skal du bruge et netværksmiljø med bredbånd. Sørg for at netværksforbindelserne og netværksindstillingerne er udført.
Vælger internetindhold 1. Vis APPS liste med APPS. ●● For detaljer om APPS liste min startskærm > APPS liste ●● Afhængigt af brugerbetingelserne kan det tage et stykke tid at læse alle dataene. 2. Vælg det ønskede produkt med adgang. / / / og tryk på OK for at opnå (Eksempel) ●● For at vende tilbage til APPS liste APPS ●● For at forlade APPS liste EXIT ●● Du kan tilslutte et tastatur og en gamepad til at indtaste tegn og spille spil på applikationerne.
Bemærk ●● Hvis du ikke kan få adgang til internetindholdet, kan du kontrollere netværksforbindelserne og indstillingerne. Netværk > Netværksforbindelser Netværk > Netværksindstillinger ●● APPS liste kan ændres uden varsel. ●● Det er ikke alle hjemmesidens funktioner, der er tilgængelige. ●● Sørg for at opdatere softwaren, når der vises en meddelelse om softwareopdatering på fjernsynsskærmen. Hvis softwaren ikke opdateres, vil du ikke kunne bruge APPS liste.
DLNA Information Dette fjernsyn er et DLNA Certified™-produkt. DLNA® (Digital Living Network Alliance) er en standard, der gør digital DLNA Certified-elektronik nemmere og mere bekvemt at bruge på et privat netværk. Besøg www.dlna.org for at se mere. ●● For at aktivere denne funktion, skal du tilslutte dette fjernsyn til dit private netværk.
●● Sådan bruges en PC som en medieserver Klargør PC’en med Windows 7 / Windows 8, og kontrollér, at serversoftwaren er installeret på PC’en. “Windows 7 / Windows 8” og “Twonky 7 (installeret på en computer med Windows XP eller Mac)” er det bedste serversoftware, der er blevet afprøvet for kompatibilitet med dette fjernsyn (pr. december 2013). Der er ikke blevet afprøvet andet serversoftware med dette tv, og derfor kan kompatibiliteten og ydeevnen ikke garanteres.
■■Afspilning af delt indhold på dette fjernsyn med DMC (Digital Media Controller) netværksudstyr Du kan se indhold gemt på medieserveren vha. det DMC netværksudstyr (smartphone, pc med Windows 7 / Windows 8 installeret osv.), der er tilsluttet dit private netværk. ●● For at bruge denne funktion med din smartphone eller Windows 7 / Windows 8 indstilles TV Remote app-indst. for dette fjernsyn. Netværk > Netværksindstillinger > TV Remote app-indst.
= Bemærk = ●● For at bruge denne funktion, tændes for tv’et. ●● Denne funktion er kun tilgængelig sammen med 1 andet stykke udstyr. ●● Du vil være i stand til at betjene dette tv ved at slukke for skærmbillede og lyd vha. din smartphone. Se applikationens supportinformation for detaljer. Brug af DLNA Til brug af DLNA® funktioner, skal du sørge for, at klargørelsen af medieserveren, netværksforbindelser og netværksindstillinger er blevet udført.
Netværksforbindelser Internetforbindelse For at bruge internetservice, skal du bruge et netværksmiljø med bredbånd. ●● Hvis du ikke har bredbåndsnetværkstjenester, skal du henvende dig til din forhandler for at få hjælp. ●● Der kan ikke anvendes opkaldsbetingede forbindelser. ●● Påkrævet hastighed (effektiv): mindst 1,5 Mbps til henholdsvist SD (standard definition) og 6 Mbps til HD (high definition) billedkvalitet. Hvis overførselshastigheden ikke er nok, afspilles indhold muligvis ikke korrekt.
DLNA-forbindelse For at bruge DLNA-funktioner skal du bruge et privat netværksmiljø, og du kan betjene funktionerne uden et netværksmiljø med bredbånd. ●● For at bruge internetservice, skal du bruge et netværksmiljø med bredbånd. Netværk > Netværksforbindelser > Internetforbindelse ■■Trådløs forbindelse (For DLNA og internetservice) Indbygget trådløs LAN (På bagsiden af TV’et) Access point Hub eller Router Internetmiljø Smartphone DLNA Certified mediaserver (PC, osv.
■■Ledningsført forbindelse (For DLNA og internetservice) ETHERNET-terminal LAN-kabel (Afskærmet) ●● Anvend Shielded Twist Pair (STP) LAN-kablet. Hub eller Router Internetmiljø DLNA Certified mediaserver (PC, osv.) ■■Trådløs forbindelse (For DLNA) Fjernsyn ●● For at bruge tv’et som et trådløst adgangspunkt Netværk > Netværksindstillinger > Manuel - Trådløst adgangspunkt DLNA Certified mediaserver (PC, osv.
Bemærk ●● Sørg for at benytte et direkte LAN-kabel. ●● Installér og tilslut udstyr, der er nødvendigt til netværksmiljøet. Du kan ikke foretage disse indstillinger på dette tv. Læs brugsvejledningen for udstyret. ●● Hvis dit bredbånd ikke har bredbåndsrouter-funktioner, kan du bruge en bredbåndsrouter. ●● Hvis dit modem har bredbåndsrouter-funktioner, men der ikke er flere ledige porte, kan du bruge en hub. ●● Sørg for, at bredbåndsrouterne og hubs er kompatible med 10BASE-T / 100BASE-TX.
Netværksindstillinger Netværksforbindelse Sørg for, at forbindelserne er udført, før du starter Opsætning af netværk. Netværk > Netværksforbindelser ■■Auto - Trådløs 1. Vis menuen med MENU. 2. Vælg Netværk > Netværksforbindelse med opnå adgang. ●● / og tryk på OK for at opnå adgang. Når LAN-kablet er forbundet, bliver kabelforbundet opsætning automatisk udført. 4. Vælg dit foretrukne adgangspunkt med adgang.
5. Indtast krypteringsnøglen til adgangspunktet med på OK for at indstille. / ●● Du kan vælge tegn ved at bruge Numeriske knapper. ●● Tryk på BACK/RETURN for at gemme. / / og tryk 6. Automatisk opsætning udføres, og Netværksstatus skærmen fremkommer. Netværk > Netværksindstillinger > Netværksstatus 7. Vælg Afslut med ●● / og tryk på OK for at indstille. For manuel indstilling Netværk > Netværksindstillinger > Manuel - Trådløs ■■Auto - Kablet 1. Vis menuen med MENU. 2.
Manuel - Trådløs Sørg for, at forbindelserne er udført, før du starter Opsætning af netværk. Netværk > Netværksforbindelser 1. Vis menuen med MENU. 2. Vælg Netværk > Netværksforbindelse > Manuel > Trådløs med / og tryk på OK for at opnå adgang. ●● / Bekræft krypteringsnøglen, indstillingerne og positionen af dit access point, inden du påbegynder opsætningen. Læs vejledningen til dit access point for detaljerede oplysninger. 3. Vælg dit foretrukne adgangspunkt med adgang.
●● For at få vist / skjule information for det markerede access point ●● Det anbefales at vælge det krypterede access point. 4. Indtast krypteringsnøglen til adgangspunktet med på OK for at indstille. / ●● Du kan vælge tegn ved at bruge Numeriske knapper. ●● Tryk på BACK/RETURN for at gemme. / / og tryk 5. IP/DNS indstillinger vises. Hent IP-adresse / Hent DNS-adresse ●● Automatisk anbefales. ●● De tilgængelige indstillinger vises automatisk.
Proxy-port: Dette nummer er også angivet af leverandøren med Proxy-adressen. 1) Vælg Proxy-port med / . 2) Indtast nummeret med Numeriske knapper. 3) Tryk på BACK/RETURN for at gemme. 6. Vælg Netværksstatus med / og tryk på OK for at opnå adgang. Netværk > Netværksindstillinger > Netværksstatus 7. Vælg Afslut med / og tryk på OK for at indstille. Manuel - Kablet Sørg for, at forbindelserne er udført, før du starter Opsætning af netværk. Netværk > Netværksforbindelser 1. Vis menuen med MENU. 2.
Proxy indstillinger ●● Dette er ikke nødvendigt for normalt husholdningsbrug. ●● Visse internettjenester er muligvis ikke tilgængelige, afhængigt af proxyindstillingerne. Proxy: Dette er adressen til relæ-serveren, der er forbundet mellem browseren og målserveren og som sender data til browseren. 1) Vælg Proxy med / og tryk på OK for at opnå adgang. 2) Indtast adressen med / tryk på OK for at indstille. / / eller Numeriske knapper, og 3) Tryk på BACK/RETURN for at gemme.
Manuel - Trådløst adgangspunkt Du kan bruge tv’et som et trådløst adgangspunkt og tilslutte netværksudstyret uden et adgangspunkt. ●● Bekræft PIN-koden og netværksindstillingerne for udstyret før du starter opsætningen. Læs udstyrets brugervejledning for detaljer. 1. Vis menuen med MENU. 2. Vælg Netværk > Netværksforbindelse > Manuel > Trådløst adgangspunkt med / / / og tryk på OK for at opnå adgang. 3. Vælg Tilslut til enheden i WPS med adgang.
Netværksstatus Viser og kontrollerer netværksstatussen (MAC-adresse, aktuelle netværksindstillinger, osv.). 1. Vis menuen med MENU. 2. Vælg Netværk > Netværksstatus med adgang. / og tryk på OK for at opnå 3. Automatisk testning udføres, og Netværksstatus skærmen vises. Prøv igen: Udfører automatisk testning af netværksforbindelsen til tv’et og viser den aktuelle status igen. Statusdetaljer: Viser den detaljerede netværksstatus (SSID, sikkerhedstype, krypteringstype, osv.).
My Home Cloud indstilling Indstiller en konto til at kunne bruge Cloud-tjenester. 1. Vis menuen med MENU. 2. Vælg Netværk > My Home Cloud indstilling med at opnå adgang. 3. Vælg et af følgende produkter med adgang. / / og tryk på OK for og tryk på OK for at opnå 4. Følg instruktionerne på skærmen. Opsæt ny konto Opsæt en konto for dette fjernsyn. Rediger konto Viser og redigerer kontoens status. Fjern konto Sletter en konto fra dette fjernsyn. Meddelelser Viser brugsbetingelserne.
VIERA navn Indstiller dit foretrukne navn for dette tv. ●● Dette navn bliver brugt som navnet på dette fjernsyn på skærmen til andet netværksudstyr. ●● Når du bruger to eller flere tv’er i dine netværksomgivelser, så indstil navnene for hvert tv. TV Remote app-indst. Indstiller til betjening af tv’et med udstyr (smartphone, osv.) tilsluttet til dit netværk. 1. Vis menuen med MENU. 2. Vælg Netværk > TV Remote app-indst. med opnå adgang. 3. Vælg et af følgende produkter med adgang.
Netværkslinkindst. Indstiller styring af tv’et med de enheder, der er tilsluttet netværket. 1. Vis menuen med MENU. 2. Vælg Netværk > Netværkslinkindst. med adgang. 3. Vælg et af følgende produkter med adgang. / / og tryk på OK for at opnå og tryk på OK for at opnå DLNA server / Registrering / Eksterne enheder 4. Vælg / med / og tryk på OK for at gemme. DLNA server (Til / Fra) Aktiverer deling af indhold på dette fjernsyn vha. netværksudstyret (DLNA Certified VIERA, osv.).
= Bemærk = ●● Afhængigt af området er denne funktion muligvis ikke tilgængelig. Kontakt din lokale Panasonic-forhandler for detaljerede oplysninger. Fildeling indstillinger Liste over netværksenheder Viser de netværksenheder, der er tilgængelige for afspilning af indholdet på Medieafspilleren. Medieafspiller > Brug af Medieafspiller > Netværksenhed Softwareopdatering Åbner den specifikke hjemmeside til opdatering af tv’ets software og søger efter tilgængelige softwareopdateringer. 1. Vis menuen med MENU.
Billeder Vælg en fil Sørg for, at klargøringen af medieserveren, netværksforbindelserne og netværksindstillingerne bliver udført. Netværk > DLNA > Information Netværk > Netværksforbindelser Netværk > Netværksindstillinger 1. Vis APPS liste med APPS. 2. Vælg Media server med / 3. Vælg en af medieserverne med / / / og tryk på OK for at opnå adgang. og tryk på OK for at opnå adgang. ●● Hvis du ønsker at benytte et andet tv, skal du vælge navnet på tv’et fra den viste medieserverliste.
Visning af billede ■■Afspilning ●● Betjening i Enkelt billede : Til det foregående billede : Til det næste billede : Stop (gå tilbage til liste) OK : Slide Show ●● For at vise / skjule betjeningsvejledningen ●● For at rotere 90 ° (Blå) ●● Tilbage til liste BACK/RETURN Betjening af diasshow Diasshow slutter, når alle billeder på listen er blevet vist. 1. Vælg filen fra thumbnails for første visning med 2. Start diasshow med / / / . (Rød) og OK.
Overgangseffekt (Fra / Fade / Dissolve / Bevægelse / Random) Vælger overgangseffekten for skift af billeder under diasshow. Fade: Det næste billede toner gradvist ud. Dissolve: Hvert billede opløses, når der skiftes til det næste billede. Bevægelse: Hvert foto vises med en effekt, der gør det større, mindre, bevæger det op eller ned. Random: Overgangseffekten vælges tilfældigt. Auto Makeup (Til / Fra) Registrerer automatisk ansigtet på billedet og forbedrer lysstyrken og kontrasten.
Videoer Vælg en fil Sørg for, at klargøringen af medieserveren, netværksforbindelserne og netværksindstillingerne bliver udført. Netværk > DLNA > Information Netværk > Netværksforbindelser Netværk > Netværksindstillinger 1. Vis APPS liste med APPS. 2. Vælg Media server med / 3. Vælg en af medieserverne med / / / og tryk på OK for at opnå adgang. og tryk på OK for at opnå adgang. ●● Hvis du ønsker at benytte et andet tv, skal du vælge navnet på tv’et fra den viste medieserverliste.
Afspilning af video ■■Afspilning Hvis du standsede den seneste afspilning, da den var i gang, spørger bekræftelsesskærmen, om du ønsker at starte fra det sted, hvor den sidst blev standset, eller fra begyndelsen. ●● Betjening af afspilning : Manuel skip (hvis tilgængeligt) – Tryk for at springe ca. 30 sekunder frem.
●● Ændring af formatforholdet 1) Vis Valg af skærmformat med ASPECT. 2) Vælg tilstanden med / og tryk på OK for at indstille. Aspekt1: Viser indholdet på hele skærmen uden forvrængning. Aspekt2: Viser indholdet på hele skærmen. Original: Viser indholdet i dets oprindelige størrelse. – Du kan også ændre billedstørrelsen ved at trykke på ASPECT. (Tryk gentagne gange, indtil du har nået den ønskede indstilling.) – Skærmformatet kan ikke ændres afhængig af indholdet.
Multilyd, 2-sproget lyd, Dobbelt monolyd Gør det muligt at vælge mellem tilgængelige lydspor (hvis de er til rådighed). ●● Det kan tage flere sekunder at ændre lyden. ●● Denne funktion er tilgængelig under afspilning. Undertekst Vis/skjul undertekster (hvis tilgængelig). ●● Denne funktion er tilgængelig under afspilning. Undertekst Vælger skrifttype til korrekt visning af undertekster (hvis tilgængeligt). ●● Denne funktion er tilgængelig under afspilning.
Lydudgangsindstillinger Du kan opnå multikanallyd via en forstærker, som er sluttet til terminalerne DIGITAL AUDIO eller HDMI2 (ARC-funktion). ●● For at bekræfte eller ændre den aktuelle lydstatus Netværk > Videoer > Video opsætning 1. Vis menuen med MENU. 2. Vælg Lyd > SPDIF-valg med / og tryk på OK for at opnå adgang. 3. Vælg Automatisk / PCM med / og tryk på OK for at indstille.
Musik Vælg en fil Sørg for, at klargøringen af medieserveren, netværksforbindelserne og netværksindstillingerne bliver udført. Netværk > DLNA > Information Netværk > Netværksforbindelser Netværk > Netværksindstillinger 1. Vis APPS liste med APPS. 2. Vælg Media server med / 3. Vælg en af medieserverne med / / / og tryk på OK for at opnå adgang. og tryk på OK for at opnå adgang. ●● Hvis du ønsker at benytte et andet tv, skal du vælge navnet på tv’et fra den viste medieserverliste.
Afspilning af musik ■■Afspilning ●● Betjening af afspilning : Spol tilbage : Hurtigt frem : Stop OK : Afbryd (viser tidssøgningsbarren) / Afspilning ●● For at springe til det specificerede tidspunkt 1) Vis tidssøgningsbarren med OK. 2) Mens tidssøgningsbarren vises Tryk på / : Søg i cirka 10 sekunder Tryk og hold nede / : Søg hurtigt 3) Spring til det angivne tidspunkt med OK.
Musik opsætning Opsætning af indstillinger for musikfilbetjening på dette tv. 1. Vis alternativmenuen med OPTION. 2. Vælg Musik opsætning > Gentag med OK. 3. Vælg Mappe / En / Fra med / og tryk på OK for at indstille.
DIGA-optager Kontrol af DIGA-optager Sørg for, at klargøringen af medieserveren, netværksforbindelserne og netværksindstillingerne bliver udført. Netværk > DLNA > Information Netværk > Netværksforbindelser Netværk > Netværksindstillinger 1. Vis APPS liste med APPS. 2. Vælg Media server med 3. Vælg DIGA med / / / / og tryk på OK for at opnå adgang. og tryk på OK for at opnå adgang. 4. Skærmen for DIGA-optageren vil blive vist.
Teknisk information Billedeformat ■■Understøttede fotoformater ●● JPEG (.jpg, .jpeg) Sub-sampling: 4:4:4, 4:2:2, 4:2:0 Billedopløsning (pixel): 8 × 8 til 30 719 × 17 279 ●● DCF- og EXIF-standarder ●● Progressiv JPEG understøttes ikke. = Bemærk = ●● Nogle filer kan muligvis ikke afspilles, selvom de overholder disse betingelser. ●● Brug ikke tegn på flere bytes eller andre specialkoder til filnavne. ●● Enheden kan muligvis ikke anvendes med dette tv, hvis fil- eller mappenavnene ændres.
Videoformat ■■Understøttede videoformater ●● AVI (.avi) Video-codec: H.264 BP/MP/HP, MPEG1, MPEG2, MPEG4 SP/ASP, VC-1, Windows Media Video Ver. 9 Lyd-codec: AAC, ADPCM, Dolby Digital, Dolby Digital Plus, DTS-kerne, HE-AAC, LPCM, MPEG Audio, MP3, WMA, WMA Pro ●● Nogle undertekster eller kapitelfunktioner er måske ikke tilgængelige. ●● MP4 (.f4v, .m4v, .mp4) Video-codec: H.
●● FLV (.flv) Video-codec: H.264 BP/MP/HP Lyd-codec: AAC, MP3 ●● 3GPP (.3gp, .3g2) Video-codec: H.264 BP/MP/HP, MPEG4 SP/ASP Lyd-codec: AAC, HE-AAC ●● PS (.mod, .mpg, .mpeg, .vob, .vro) Video-codec: MPEG1, MPEG2 Lyd-codec: Dolby Digital, LPCM, MPEG Audio ●● TS (.mts, .m2ts, .tp, .trp, .ts, .tts) Video-codec: H.
■■Understøttede undertekstformater ●● MicroDVD, SubRip, TMPlayer (.srt, .sub, .txt) ●● Videofilen og undertekstfilen ligger i den samme mappe, og filnavnene er de samme, bortset fra filendelserne. ●● Hvis der er mere end én undertekstfil i den samme mappe, vises de i følgende prioritetsorden: “.srt”, “.sub”, “.txt”. = Bemærk = ●● Nogle filer kan muligvis ikke afspilles, selvom de overholder disse betingelser. ●● Brug ikke tegn på flere bytes eller andre specialkoder til filnavne.
Musikformat ■■Understøttede musikformater ●● MP3 (.mp3) ●● AAC (.m4a) ●● Kopibeskyttede filer kan ikke afspilles. ●● FLAC (.flac) ●● WMA / WMA Pro (.wma) ●● Kopibeskyttede filer kan ikke afspilles. ●● WMA Lossless understøttes ikke. ●● LPCM (.wav) = Bemærk = ●● Nogle filer kan muligvis ikke afspilles, selvom de overholder disse betingelser. ●● Brug ikke tegn på flere bytes eller andre specialkoder til filnavne.
Funktioner VIERA Link “HDAVI Control™” Resume af VIERA Link Opnå ekstra indbyrdes HDMI-funktionsdygtighed med Panasonic-produkter, som har funktionen “HDAVI Control™”. VIERA Link (HDAVI Control) forbinder tv’et og udstyret med VIERA Linkfunktion, og muliggør nem styring, afspilning, energibesparelse, oprettelse af hjemmebiograf osv. uden brug af komplicerede indstillinger. Tilslutninger til udstyret (DIGA-optager, HD-videokamera, Afspiller-biograf, Forstærker, osv.
■■VIERA Link (HDMI-tilslutning) ●● Anvend et fuldt monteret kompatibelt HDMI-kabel. ●● Tilslut det udstyr, som understøtter VIERA Link, til fjernsynets HDMIterminal via et HDMI-kabel. Læs brugsvejledningen for udstyret angående HDMI-kabel til tilslutning af Panasonic HD-videokamera eller LUMIX-kamera.
■■VIERA Link (HDMI- og lydudgangstilslutninger) ●● Anvend et fuldt monteret kompatibelt HDMI-kabel. ●● Tilslut det udstyr, som understøtter VIERA Link, til fjernsynets HDMIterminal via et HDMI-kabel. ●● Anvend et fuldt monteret SCART-kabel. ●● Brug det optiske digitale lyslederkabel eller SCART-kabel til lydudgang fra fjernsynet.
■■Tilgængelige funktioner (HDMI- og lydudgangstilslutninger) Afspiller-biograf ●● Nem afspilning ●● Link strøm til ●● Link strøm af ●● Intelligent auto-standby ●● VIERA Link Control ●● Højttaler-valg Blu-ray Disc biograf ●● Nem afspilning ●● Link strøm til ●● Link strøm af ●● Standby strømbesparelse ●● Intelligent auto-standby ●● VIERA Link Control ●● Højttaler-valg Forstærker ●● Link strøm af ●● Intelligent auto-standby ●● Højttaler-valg : Til rådighed med udstyr, som har fun
■■VIERA Link-styring af kompatibelt udstyr Det nedenstående skema viser det maksimale antal kompatibelt udstyr, der kan styres af VIERA Link Control. Dette inkluderer forbindelser til udstyr, der allerede er sluttet til fjernsynet. For eksempel DIGA-optageren, der er sluttet til forstærkeren, som er sluttet til fjernsynet ved hjælp af et HDMI-kabel. Funktioner > VIERA Link “HDAVI Control™” > VIERA Link Control ●● Optager: Maksimum 3 (DIGA-optager, osv.
Nem afspilning Automatisk skift af indgang - Når det tilsluttede udstyr anvendes, skiftes indgangsindstillingen automatisk. Link strøm til Indstil Link strøm til til Til i opsætningsmenuen for at bruge denne funktion. Når afspilning begynder på det tilsluttede udstyr, eller direkte navigator / funktionsmenu for udstyret aktiveres, vil der automatisk blive tændt for tv’et. (Kun når fjernsynet er indstillet til standby.
VIERA Link Control Det er muligt at styre nogle af det tilsluttede udstyrs funktioner med tv’ets fjernbetjening ved at rette den mod apparatets signalmodtager. 1. Vis APPS liste med APPS. 2. Vælg VIERA Link med / / / og tryk på OK for at opnå adgang. 3. Vælg VIERA Link Control med / og tryk på OK for at opnå adgang. 4. Vælg et af følgende produkter med adgang.
= Bemærk = ●● Kontrollér indstillingerne og udstyret, hvis du ikke kan betjene det. Funktioner > VIERA Link “HDAVI Control™” > Resume af VIERA Link ●● Nogle handlinger er muligvis ikke til rådighed, afhængigt af udstyret. I dette tilfælde anvendes fjernbetjeningen til det tilsluttede udstyr. ●● Læs brugsvejledningen for udstyret angående detaljer om betjening af det tilsluttede udstyr.
Bemærk ●● Disse funktioner vil muligvis ikke fungere ordentligt, afhængigt af det tilsluttede udstyr. ●● Billede eller lyd er muligvis ikke til rådighed i de første par sekunder, når indgangstilstanden ændres. ●● “HDAVI Control 5” er den sidste nye standard for HDAVI Controlkompatibelt udstyr. Denne standard er kompatibel med konventionelt HDAVI-udstyr.
Børnelås Brug af børnelås Der er muligt at låse bestemte kanaler / AV-indgangsterminaler for at begrænse adgang til dem. Når låste kanaler / indgange er valgt, vil der vises en meddelelse. Indtast PIN-koden for at starte visning. 1. Vis menuen med MENU. 2. Vælg Indstilling > Børnelås med / og tryk på OK for at opnå adgang. 3. Indtast PIN-koden (4 cifre) med Numeriske knapper. ●● Indtast PIN-koden to gange ved første indstilling. ●● Notér PIN-koden ned, så du ikke glemmer den.
PIN-kode Du kan ændre PIN-koden. 1. Vælg Skift PIN kode med / og tryk på OK for at opnå adgang. 2. Indtast en ny PIN-kode to gange med Numeriske knapper. = Bemærk = ●● Indstilling af Fabriksindstilling sletter PIN-koden og alle indstillinger. Forældreklassificering For at se DVB-programmer, der har anmeldelsesinformation for den valgte alder, indtast PIN-kode for at starte visning (afhænger af programudbyderen). 1. Vælg Forældreklassificering med / og tryk på OK for at opnå adgang. 2.
Datatjeneste applikation Brug af dataserviceprogram Du kan bruge HbbTV (Hybrid Broadcast Broadband TV), hvilket er et af de interaktive servicetilbud for digital programvisning. 1. Vis TV valg med TV. 2. Vælg tilstanden med / og tryk på OK for at indstille. DVB-C / DVB-T 3. Vis menuen med MENU. 4. Vælg Indstilling > Datatjeneste applikation > Tjeneste med på OK for at opnå adgang. 5. Vælg Autostart Til med / / og tryk og tryk på OK for at indstille.
Bemærk ●● For at bruge HbbTV-service fuldt ud, skal du anvende et netværksmiljø med bredbånd. Sørg for at netværksforbindelserne og netværksindstillingerne er udført. Netværk > Netværksforbindelser Netværk > Netværksindstillinger ●● Ikke hele dataservicen er tilgængelig i alle lande og afhænger af område og programudbyder. ●● Afhængigt af forbindelsesmiljøet vil internetforbindelsen muligvis være langsom eller ikke vellykket. ●● Brugen kan variere alt efter programudbyder.
Fælles grænseflade Forsigtig Hvis den krypterede besked vises på skærmen, er det korrekte Common Interface (CI) modul og smartkort, der kræves til denne tjeneste, ikke blevet isat. ■■Hvordan man isætter CI-modul og smartkort ●● Sluk for tv’et med Hovedafbryder tænd/sluk knap hver gang der isættes eller fjernes et CI-modul. ●● Hvis et smartkort og et CI-modul leveres som et sæt, bedes du først isætte CI-modulet og derefter smartkortet i CI-modulet.
Brug af almindeligt interface Menuen for det fælles interface-modul giver adgang til software, som findes på de Common Interface (CI) modul. ●● Denne funktion er muligvis ikke til rådighed i nogle lande eller regioner. ●● Video- og lydsignaler kan muligvis ikke blive udsendt afhængigt af udsendelserne eller tjenesterne. Selv om CI-modulet sætter dig i stand til at se nogle tjenester, kan dette fjernsyn ikke garantere, at alle tjenester (f.eks. krypterede betalings-tvkanaler) kan anvendes.
Fabriksindstilling Fabriksindstilling Nulstiller tv’et til dets oprindelige indstilling (dvs. ingen kanaler er forudindstillet). Alle indstillinger nulstilles (kanaler, billede, lydindstillinger osv.). 1. Vis menuen med MENU. 2. Vælg Indstilling > System > Fabriksindstilling med at opnå adgang. ●● / og tryk på OK for Der kræves en PIN-kode til at indstille børnesikring afhængigt af land. Hvis du har glemt din ændrede din PIN-kode, indtast “6969” som PINkode. Funktioner > Børnelås > PIN-kode 3.
Opdatering af fjernsynssoftwaren Information En ny version af software kan blive tilgængelig for download for at forbedre ydelsen eller anvendelsen af fjernsynet. Hvis der er en opdatering til rådighed, vises et notifikationsbanner, hvis kanalen har opdateringsinformationen. ●● For at installere ny software skal du vælge Standby / Nu med trykke på OK for at indstille. / og Standby: Installerer nyt software i tilstanden Standby. Nu: Installerer nyt software nu.
= Bemærk = ●● Download kan vare flere timer. ●● Under download og opdatering af software må man IKKE slukke for fjernsynet. ●● Notifikationsmeddelelsen kan være en påmindelse. I dette tilfælde vil datoinformationen (den dato hvor den nye version kan anvendes) fremkomme. Det er muligt at indstille en reservation for opdatering. Opdateringen vil ikke starte, når fjernsynet er slukket. Manuel opdatering Du kan opdatere ny software manuelt. 1. Vis menuen med MENU. 2.
Indstilling af tegn Brug af numeriske taster Du kan indtaste tegn for frie indgangsposter med Numeriske knapper. Tryk gentagne gange på Numeriske knapper, indtil du har nået den ønskede indstilling. :.@/1!:#+-*_()“‘%&?,;=$[]~<>{}|`^\ :abc2ABCåæÅÆ :def3DEF :ghi4GHI :jkl5JKL :mno6MNOøØ :pqrs7PQRS :tuv8TUV :wxyz9WXYZ : Mellemrum 0 ●● Tegnet vælges automatisk, hvis du slipper i 1 sekund. ●● Du kan også indstille tegnet ved at trykke på OK eller andre Numeriske knapper i mindre end 1 sekund.
Tastatur Tastatur ●● Tastaturer, der kræver drivers, er ikke understøttede. ●● For at ændre sprogtype, vælg USB tastatur-layout. 1) Vis menuen med MENU. 2) Vælg Indstilling > System > USB tastatur-layout med OK for at opnå adgang. 3) Vælg sproget med / / og tryk på , og tryk på OK for at indstille. ●● Tegn vises muligvis ikke korrekt på fjernsynsskærmen, afhængigt af det tilsluttede tastatur eller tastaturopsætningen.
Indstillinger Indstillingsmenu Betjening Forskellige menuer gør det muligt at udføre indstillinger af billede, lyd og andre funktioner. 1. Vis menuen med MENU. ●● De viste punkter varierer afhængigt af indgangssignalet. 2. Vælg menuen med / og tryk på OK for at opnå adgang. 3. Vælg følgende punkter med / og tryk på OK for at opnå adgang. ●● Kun disponible poster kan vælges. ●● Du kan også opnå adgang fra eHJÆLP ved at trykke på hvert punkt.
●● For at ændre menusider ●● For at skifte farvetype for visninger på skærmen skal du indstille OSDfarve. min startskærm > min startskærm > OSD-farve = Bemærk = ●● Menuposter og valgmuligheder kan variere afhængigt af tilstanden (TVtilstand, Medieafspiller, netværkstjenester osv.). ■■Brug af kontrolpanelknapper 1. Tryk og hold INPUT/OK/HOLD for MENU-knappen i ca. 3 sekunder for at vise hovedmenuen. 2. Indstil med følgende kontrolpanelknapper.
Billede Billedindstilling Vælger din favoritbilledtilstand for hver indtastning. (Dynamisk / Normal / Biograf / True Cinema / Brugerdefineret) Ser > For bedste billede > Billedindstilling Grundlæggende indstillinger Baggrundsbelysning, Kontrast, Lys, Farve, Nuance, Skarphed Juster niveauerne for disse muligheder i overensstemmelse med dine personlige præferencer.
Omgivelsessensor Funktion til automatisk lysstyrkekontrol Justerer billedindstillinger automatisk afhængig af de omgivende lysforhold. (Til / Fra) Ser > For bedste billede > Omgivelsessensor Støjreduceringsindstillinger Støjreduktion (Automatisk / Maksimum / Middel / Minimum / Fra) Reducerer uønskede billedeforstyrrelser.
Indstillingsmuligheder Film-kadence indstilling (Til / Fra) Forbedrer lodret opløsning til visning af filmbilleder. Ser > For bedste billede > Indstillingsmuligheder ●● Denne funktion er tilgængelig for sammenflettede signaler (undtagen i netværkstjeneste). 1080p Pixel Direct 39”‑/ 42”‑/ 50”‑modeller (Til / Fra) Reproducerer den originale, detaljerede billedkvalitet for 1080 p (HDMI) inputsignal.
3D-COMB (Til / Fra) Får stillbilleder eller billeder i langsom bevægelse til at se mere levende ud. Ser > For bedste billede > Indstillingsmuligheder ●● For PAL- / NTSC-signalmodtagelse i TV-tilstand eller fra sammensat forbindelse Skærmindstillinger 16:9 Overscan (Til / Fra) Vælger skærmarealet, der viser billedet i 16:9 skærmformat.
Kopier justering Kopierer de valgte True Cinema eller Brugerdefineret indstillinger til dem fra en anden indgang. Ser > For bedste billede > Kopier justering Gendan standard Nulstiller den aktuelle Billedtilstand til standardindstillingerne.
Lyd Lydindstilling Vælger din favoritlydtilstand for hver indtastning. (Standard / Musik / Tale / Bruger) Ser > For den bedste lyd > Lydtilstand Grundlæggende indstillinger Bas Justerer niveauet for at forøge eller reducere det lavere, dybere lyd-output. Ser > For den bedste lyd > Grundlæggende indstillinger Diskant Justerer niveauet for at forøge eller reducere det skarpere, højere lyd-output.
Lydstyrkeindstillinger Højttalerindstilling (TV-højttaler / Hovedtelefoner / Fra) Vælger fjernsynshøjtalere eller høretelefoner til lydudgang. Indstil til Fra ved brug af de eksterne højttalere. Ser > For den bedste lyd > Lydstyrkeindstillinger Hovedtlf. Styrke Justerer hovedtelefonernes lydstyrke. Ser > For den bedste lyd > Lydstyrkeindstillinger Automatisk gainkontrol (Til / Fra) Regulerer automatisk store lydniveauforskelle imellem kanaler og indgangssignaler.
Talevejledning Talevejledning (Til / Fra) Indstil på Til for at aktivere lydguiden til de grundlæggende funktioner (menupunkter, meddelelser på skærmen osv.) for synshæmmede brugere. Ser > For den bedste lyd > Talevejledning Hastighed (Hurtig / Normal / Langsom) Vælger oplæsningshastigheden for lydguiden. Ser > For den bedste lyd > Talevejledning Lydstyrke (Maksimum / Middel / Minimum) Vælger lydstyrken for lydguiden. Ser > For den bedste lyd > Talevejledning Sprog Ændrer sproget for lydguiden.
Lydbeskrivelse Foretrukne lydtype (Standard / Lydbeskrivelse) Fortællingsindstillinger til brugere med nedsat syn Ser > For den bedste lyd > Lydbeskrivelse ●● For DVB Lydstyrke Justerer lydstyrken af Lydbeskrivelsen. Ser > For den bedste lyd > Lydbeskrivelse ●● For DVB Højttalere (Mix / Standard) Indstil til Mix for at aktivere beskrivelsens lydbånd i tv-højttalerne.
Avancerede indstillinger MPX Vælger multipleks lydtilstand (hvis tilgængelig). Ser > For den bedste lyd > Avancerede indstillinger ●● For Analog Lydindstilling (Automatisk / Multikanal / Stereo / MPEG) Vælger initialiseringsindstillingen for lydspor. Ser > For den bedste lyd > Avancerede indstillinger ●● For DVB SPDIF-valg (Automatisk / PCM) Vælger initialiseringsindstillingen for digitalt lydudgangssignal fra terminalerne DIGITAL AUDIO og HDMI2 (ARC-funktion).
Netværk Netværksforbindelse Indstiller netværksindstillingen til brug af dette tv i dit netværksmiljø. Netværk > Netværksindstillinger > Netværksforbindelse Netværksstatus Viser og kontrollerer netværksstatussen (MAC-adresse, aktuelle netværksindstillinger, osv.). Netværk > Netværksindstillinger > Netværksstatus My Home Cloud indstilling Indstiller en konto til at kunne bruge Cloud-tjenester.
Andre indstillinger Softwareopdatering Kontrollerer om der findes tilgængelige software-opdateringer på Panasonics hjemmeside. Netværk > Netværksindstillinger > Softwareopdatering Ny software-meddelelse (Til / Fra) Vælger om der skal vises en meddelelse, når der er fundet nyt software via netværket.
Timer Sluk timer Indstiller tidsrummet indtil tv’et automatisk går i standby-tilstand. (90 / 75 / 60 / 45 / 30 / 15 / Fra (minutter)) Ser > Grundlæggende > Sluk timer Tidszone Indstiller tidsdata. Ser > Grundlæggende > Justerer klokkeslæt Automatisk standby Skifter automatisk dit tv til standby-tilstand for at spare energi, når der ikke har været nogen aktivitet i 4 timer.
Indstilling Øko-navigation Indstiller automatisk tv’et til den mest energibesparende tilstand. Ser > Grundlæggende > Energibesparende funktioner USB-enhedsopsætning Sikker fjernelse af USB-enhed. Medieafspiller > Brug af Medieafspiller > Information Børnelås Bruger adgangskontrol til kanaler eller indgangssignal for at forhindre uønsket adgang. Funktioner > Børnelås > Brug af børnelås Indstillingsmenu Rediger favoritter Opretter en liste over foretrukne kanaler.
Foretrukken TV-udbyder Vælger dit foretrukne netværk for hver sendestation (kun tilgængeligt i visse lande). Ser > Indstilling på og redigering af kanaler > Andre indstillinger ●● Til DVB-C, DVB-T Ny kanalmeddelelse (Til / Fra) Vælger om der skal sendes en notifikationsmeddelelse, når en ny kanal enten bliver fundet eller ikke fundet.
= Bemærk = ●● Indstillingerne i Indstillingsmenu kan kun anvendes for den valgte TVtilstand. Menu-navnet afhænger af TV-tilstand. (DVB-C indstillingsmenu / DVB-T indstillingsmenu / Analog indstillingsmenu) Sprog Skærmmenusprog Skifter sprog på display vist på skærmen. Ser > Grundlæggende > Sprog Lydsprog 1 / 2 Vælger det første og andet foretrukne sprog for DVB multilyd (afhængigt af stationen).
Billedindstillinger OSD-farve (Dybsort / Lysegrå / Jordbrun / Sandbeige) Vælg den foretrukne farvetype for visninger på skærmen. min startskærm > min startskærm > OSD-farve Undertekst(indstilling) (Standard / Nedsat hørelse) Vælger den foretrukne underteksttype. Ser > Grundlæggende > Undertekst Tekst-TV (TOP (FLOF) / Liste) Vælger tilstanden tekst-tv. Ser > Tekst-TV > Tekst-tv-tilstand Tekst-tv bogstaver (Vest / Oest1 / Oest2) Vælger skrifttype for tekst-tv.
Timeout for indikation (10 / 9 / 8 / 7 / 6 / 5 / 4 / 3 / 2 / 1 / ingen visning (sekunder)) Indstiller hvor lang tid informationsbanneret vises på skærmen. Ser > Grundlæggende > Informationsbanner Smart Banner (Til / Fra) Vis introduktionsbanner for internettjenesten. Ser > Grundlæggende > Informationsbanner Radioindstilling (20 / 15 / 10 / 5 / Fra (sekunder)) Indstiller timeren til automatisk slukning af skærm, når en radiokanal er valgt.
VIERA Link indstillinger VIERA Link (Til / Fra) Indstiller til brug af VIERA Link-funktioner. Funktioner > VIERA Link “HDAVI Control™” > Forberedelser Link strøm til (Til / Fra) Indstiller til brug af Tænd Link-funktioner. Funktioner > VIERA Link “HDAVI Control™” > Link strøm til Link strøm af (Til / Fra) Indstiller til brug af Sluk Link-funktioner.
Datatjeneste applikation Tjeneste (Autostart Til / Autostart Fra / Fra) Indstiller til brug af Hybrid Broadcast Broadband tv-applikation. ●● Ikke hele dataservicen er tilgængelig i alle lande og afhænger af område og programudbyder. Funktioner > Datatjeneste applikation > Brug af dataserviceprogram ●● For DVB Gem cookie (Til / Fra) Indstiller for at gemme oplysningerne fra en dataservice til tv’et for at kunne opnå hurtig adgang igen.
Andre indstillinger GUIDE Plus+ indstillinger Indstillinger for GUIDE Plus+-systemet Ser > TV Guide > Brug af TV-guide Dvale-tilstand (Til / Fra) Reducerer billedets lysstyrke for at reducere elforbruget.
Support Ofte stillede spørgsmål (FAQ) Billede Følg venligst disse enkle anvisninger til løsning af problemet, inden du bestiller reparation eller ringer efter hjælp. Rådfør dig med din lokale Panasonic-forhandler, hvis problemet stadig ikke kan løses. Automatisk format ●● Automatisk format er lavet, for at man kan opnå det bedste formatforhold, så skærmen fyldes helt ud. Ser > For bedste billede > Formatkontrolsignal ●● Tryk på ASPECT, hvis du gerne vil ændre skærmformatet manuelt.
Der kan ikke vises noget billede ●● Kontrollér at den korrekte indgangstilstand er valgt. ●● Kontrollér indstillingen af AV2 (COMPONENT / VIDEO) i Inputvalg for at svare til udgangssignalet fra det eksterne udstyr. Ser > Udvendigt udstyr ●● Er Kontrast, Lys eller Farve i menuen Billede indstillet på minimum? Ser > For bedste billede > Grundlæggende indstillinger ●● Kontroller at alle nødvendige kabler og tilslutninger er sat ordentligt i forbindelse.
Digital-tv Følg venligst disse enkle anvisninger til løsning af problemet, inden du bestiller reparation eller ringer efter hjælp. Rådfør dig med din lokale Panasonic-forhandler, hvis problemet stadig ikke kan løses. Blokstøj, fastfrosne eller forsvindende billeder forekommer / Visse kanaler kan ikke indstilles ●● Kontrollér placeringen, retningen og forbindelsen af antennen. ●● Kontroller Signaltilstand. Hvis Signalkvalitet vises med rødt, er DVBsignalet svagt.
Analog-tv Følg venligst disse enkle anvisninger til løsning af problemet, inden du bestiller reparation eller ringer efter hjælp. Rådfør dig med din lokale Panasonic-forhandler, hvis problemet stadig ikke kan løses. Hvide pletter eller skyggebillede (ghosting) forekommer / Visse kanaler kan ikke indstilles ●● Kontrollér placeringen, retningen og forbindelsen af antennen. ●● Vejrforholdene vil påvirke signalmodtagelsen (kraftig regn, sne, osv.), specielt i områder hvor modtagelsen er dårlig.
Lyd Følg venligst disse enkle anvisninger til løsning af problemet, inden du bestiller reparation eller ringer efter hjælp. Rådfør dig med din lokale Panasonic-forhandler, hvis problemet stadig ikke kan løses. Der frembringes ingen lyd ●● Er “Lyd slået fra” aktiv? Tryk på MUTE for at slå lyden til eller fra. ●● Er lydstyrken sat til minimum? ●● Kontroller tilslutninger og indstillinger af det eksterne udstyr. Ser > Udvendigt udstyr ●● Kontroller at Højttaler-valg er indstillet til TV.
HDMI Følg venligst disse enkle anvisninger til løsning af problemet, inden du bestiller reparation eller ringer efter hjælp. Rådfør dig med din lokale Panasonic-forhandler, hvis problemet stadig ikke kan løses. Lyden er usædvanlig ●● Sæt det tilsluttede lydudstyrs lydindstilling til “2ch L.PCM”. ●● Kontrollér HDMI indgang i menuen Lyd. Ser > For den bedste lyd > Avancerede indstillinger ●● Vælg analog lydtilslutning, hvis den digitale lydtilslutning har et problem.
Netværk Følg venligst disse enkle anvisninger til løsning af problemet, inden du bestiller reparation eller ringer efter hjælp. Rådfør dig med din lokale Panasonic-forhandler, hvis problemet stadig ikke kan løses. Kan ikke forbinde til netværket ●● Kontrollér at LAN-kablet eller den trådløse LAN-adapter er korrekt tilsluttet. Netværk > Netværksforbindelser ●● Kontrollér forbindelserne og indstillingerne.
Kan ikke betjene internetindhold ●● Kontrollér forbindelserne og indstillingerne. Netværk > Netværksforbindelser > Internetforbindelse Netværk > Netværksindstillinger ●● Serveren eller den tilsluttede linje kan være optaget nu. Andet Følg venligst disse enkle anvisninger til løsning af problemet, inden du bestiller reparation eller ringer efter hjælp. Rådfør dig med din lokale Panasonic-forhandler, hvis problemet stadig ikke kan løses.
LCD-panelet flytter sig en anelse, og der høres en raslen, når du skubber til den med en finger ●● Der er et lille mellemrum rundt om panelet for at undgå beskadigelse. Dette er helt normalt.
Vedligeholdelse Pleje og rengøring Tag først stikket ud af stikkontakten. ■■Displaypanel, Kabinet, Sokkel Almindelig pleje: Tør forsigtigt overfladen af billedskærmen, kabinettet eller hylden med en blød klud for at rengøre snavs eller fingeraftryk. Til genstridigt snavs: (1) Tør først overfladen af for støv. (2) Fugt en blød klud med rent vand eller fortyndet neutralt rengøringsmiddel (1 del rengøringsmiddel til 100 dele vand). (3) Vrid kluden hårdt. (Undgå at væske trænger ind i tv’et.
Information Brug af Hjælp-menuen 1. Vis menuen med MENU. 2. Vælg Hjælp med / og tryk på OK for at opnå adgang. 3. Vælg TV selvtest / System information / Enhedsinformation med tryk på OK for at opnå adgang. TV selvtest Foretag en diagnosticering af billede eller lydproblemer. Følg instruktionerne på skærmen. System information Viser dette tv’s systeminformation. Enhedsinformation Viser tv’ets enhedsinformation.
Ekstraudstyr Kommunikationskamera ■■Kommunikationskamera ●● TY-CC20W – Dette kamera kan bruges på video-kommunikationsværktøjet. Netværk > Internetindhold > Vælger internetindhold – Afhængigt af det geografiske område er ekstraudstyret muligvis ikke tilgængeligt. Kontakt din lokale Panasonic-forhandler for detaljerede oplysninger. Vægbeslag ■■Vægbeslag ●● Kontakt venligst din nærmeste Panasonic-forhandler for at købe det anbefalede vægbeslag.
Licens Licens Selv om der ikke er nogen speciel nævnelse af firma- eller produktvaremærker, er disse varemærker fuldt gyldige. DVB og DVB-logoerne er varemærker tilhørende DVB Project. Skype er et varemærke tilhørende Skype Limited. DLNA®, DLNA-logoet og DLNA CERTIFIED™ er varemærker, servicemærker eller certificeringsmærker tilhørende Digital Living Network Alliance. Windows er et registreret varemærke tilhørende Microsoft Corporation i USA og andre lande. Mac er et varemærke tilhørende Apple Inc.
GUIDE Plus+, Rovi og Rovi Guide er varemærker tilhørende Rovi Corporation og/eller dets datterselskaber. GUIDE Plus+ og Rovi Guide-systemet er produceret under licens udstedt af Rovi Corporation og/eller dets datterselskaber. Rovi Guide-systemet er beskyttet af patenter og patentansøgninger indleveret i USA, Europa og andre lande inklusive et eller flere af de amerikanske patenter 6 396 546; 5 940 073; 6 239 794 udstedt til Rovi Corporation og/eller dets datterselskaber.
Dette produkt inkluderer følgende software: (1) software udviklet uafhængigt af eller for Panasonic Corporation, (2) software der tilhører tredjeparter og for hvilke Panasonic Corporation har licens til, (3) softwaren med licens iht. GNU LESSER GENERAL PUBLIC LICENSE Version 2.1 (LGPL V2.1), (4) softwaren med licens iht. GNU GENERAL PUBLIC LICENSE Version 2 (GPL V2) og/eller, (5) software med åben kildekode forskellig fra softwaren med licens iht. LGPL V2.1 og GPL V2.
Ver.1.