TX-32AS500Y TX-39AS500Y TX-42AS500Y TX-50AS500Y e HELP Norsk
Min startskjerm Min startskjerm • Informasjon 10 • Hvordan bruke 11 • Innstillinger 12 • Meny fargevalg 13 APPS-liste • Informasjon 14 • Hvordan bruke 15 • Innstillinger 15 Se Grunnleggende • Enkel tilkobling 16 • Velge kanal 19 • Informasjonsfelt 21 • Tilleggsmeny 23 • Undertekst 25 • Siste visning 25 • Av timer 26 • Energibesparende funksjoner 26 • Stille inn tid 28 • Språk 29 Eksternt utstyr • Ekstern kobling 30 • Å se på ekstern inngang 33 • Bruke med TV-ens fjernkontroll
• Aspekt 41 • Aspekt-styresignal 43 • Grunninnstillinger 45 • Støyreduksjonsinnstillinger 46 • Avanserte innstillinger 46 • Tilleggsinnstillinger 49 • Skjerminnstillinger 51 • Kopier justering 52 For beste lyd • Lydmodus 53 • Grunninnstillinger 54 • Voluminnstillinger 55 • Stemmeveiledning 56 • Lydbeskrivelse 57 • Avanserte innstillinger 58 TV Guide • Bruke TV Guide 60 Tekst-TV • Visning av Tekst-TV 64 • Tekst-TV-modus 66 • Tekst tv bokstaver 67 Innstilling og redigering av kanaler • Innstillings
Media Player Bruke Media Player • Informasjon 77 • Velge enhet / modus 79 • Nettverksenhet 81 Fotomodus • Velge filen 82 • Se bilde 83 • Sortere bilder 83 • Bruke slideshow 84 Videomodus • Velge filen 88 • Se video 89 • Videokonfigurasjon 91 • Innstillinger for lydutgang 92 Musikkmodus • Velge filen 93 • Spille av musikk 94 • Musikkinnstillinger 95 Teknisk informasjon • Behandle enheter forsiktig 96 • USB-innretning 96 • Fotoformat 97 • Videoformat 98 • Musikkformat 101 N
• Bruke DLNA 108 Nettverksforbindelser • Internett-tilkobling 109 • DLNA-tilkobling 110 • Merk 112 Nettverksinnstillinger • Nettverkstilkobling 113 • Manuell - Trådløst 115 • Manuell - Kablet 117 • Manuell - Trådløs ruter 118 • Nettverksstatus 119 • My Home Cloud-innst. 120 • VIERA-navn 120 • App-innst. for TV Remote 121 • Innst. for nettv.
Teknisk informasjon • Fotoformat 137 • Videoformat 138 • Musikkformat 141 Funksjoner VIERA Link “HDAVI Control™” • Oppsummering av VIERA Link 142 • Forberedelser 146 • Enkel avspilling 147 • Link strøm på 147 • Link strøm av 147 • Strømsparing hvilemodus 147 • Smart auto hvilemodus 147 • VIERA Link Control 148 • Høyttaler-valg 149 • Merk 150 Barnelås • Bruke barnesikring 151 • PIN-kode 152 • Foreldre kontroll 152 Data Service Applikasjon • Bruke data service application 153 • Informasjonskaps
• Manuell oppdatering 159 Stille inn tegn • Bruke tallknapper 160 Tastatur • Tastatur 161 Innstillinger Innstillingsmeny • Hvordan bruke 162 Bilde • Bildemodus 164 • Grunninnstillinger 164 • Lyssensor 164 • Støyreduksjonsinnstillinger 165 • Avanserte innstillinger 165 • Tilleggsinnstillinger 166 • Skjerminnstillinger 167 • Kopier justering 167 • Tilbakestill til standard 167 Lyd • Lydmodus 168 • Grunninnstillinger 168 • Voluminnstillinger 169 • Stemmeveiledning 170 • Lydbeskrivelse 171 • Avansert
• Innst. for nettv.
Informasjon • Bruke hjelpemenyen 194 Ekstrautstyr • Kommunikasjonskamera 195 • Konsoll for oppheng på vegg 195 Lisens • Lisens 196 OK Menu ●● Bokstavene som følger med i boksen indikerer knappen på fjernkontrollen. Bokstavene i cyanblå indikere elementene som vises på skjermen. Referansene i eHELP Bildene som er brukt i eHELP er kun for illustrasjonsformål.
Min startskjerm Min startskjerm Informasjon “Min startskjerm” er en inngangsport til TV, applikasjoner og mer. Den gir deg enkel tilgang til spesialfunksjoner som Media Player, videoer, spill, kommunikasjonsverktøy osv. som vist nedenfor (eksempel). HOME OK OK HOME Hjem-skjerm Valgt innholdsskjerm (TV, programmer, osv.) Hjem-skjermvalg – Foretrukken Hjem-skjerm kan velges eller legges til.
Hvordan bruke Hjem-skjerm gir tilgang til spesielle funksjoner som Media Player, TV, Internett-innhold, datatjenester, kommunikasjonsverktøy osv. 1. Vis Hjem-skjerm med HOME. (Eksempel) ●● Siste viste Hjem-skjerm vises når TV-en slås på. ●● Trykk på nytt for å velge og legge til foretrukket Hjem-skjerm-oppsett. Min startskjerm > Min startskjerm > Innstillinger 2. Velg en funksjon med ●● / / / og trykk OK for å få tilgang. For å se TV i fullskjerm 1) Velg TV-viser med (Eksempel) / / / .
Innstillinger Velg oppsettmenyen fra verktøyguiden på toppen av skjermen. (Eksempel) ■■Hjem-skjermvalg 1. Vis Hjem-skjermvalg med HOME. (Eksempel) 2. Velg skjermen med / og trykk OK for å stille inn. Fullskjerm-TV: Viser TV i fullskjerm. Hjem-skjerm for TV: Gjør TV-opplevelsen din mer praktisk og komfortabel Livsstils-skjerm: Viser nyttig informasjon og tjenester for hverdagen på TV-en. Informasjon-skjerm: Gled deg over Internett-innhold når du ser på TV.
■■Søk Du kan søke i innhold fra flere funksjoner. 1. Velg Søk fra verktøyguiden. 2. Følg instruksjonene på skjermen. = Merk = ●● For å endre fargetypen av visninger på skjermen, still inn Meny fargevalg. Min startskjerm > Min startskjerm > Meny fargevalg ●● For å bruke denne funksjonen trenger du et bredbåndsnettverksmiljø. Forsikre deg om at nettverksforbindelsene og nettverksinnstillingene er fullført.
APPS-liste Informasjon Ulike programmer (Internett-innhold, nettverksinnhold, Media Player, osv.) kan enkelt nås fra APPS-liste. ■■APPS-liste (Eksempel) = Merk = ●● APPS-liste kan endres uten forvarsel.
Hvordan bruke Du kan få tilgang til spesialfunksjoner som Internett-innhold, nettverksinnhold, Media Player, osv. fra APPS-liste. 1. Vis APPS-liste med APPS. (Eksempel) ●● Avslutte APPS-liste EXIT 2. Velg et ikon for funksjonene med tilgang.
Se Grunnleggende Enkel tilkobling Forsikre deg om at enheten er koblet fra nettkontakten før du fester til eller kobler fra noen ledninger.
■■DVD-opptaker / VCR Terrestrisk / kabelterminal RF-kabel DVD-opptaker / VCR Bakkeantenne / Kabel AV1 (SCART)-terminal SCART-kabel - 17 -
■■DVD-opptaker (VCR) / Set-top-boks HDMI-terminal HDMI- kabel Set-top-boks Parabolantenne AV1 (SCART)-terminal SCART-kabel Terrestrisk / kabelterminal RF-kabel DVD-opptaker / VCR Bakkeantenne / Kabel = Merk = ●● For VIERA Link-tilkoblinger Funksjoner > VIERA Link “HDAVI Control™” > Oppsummering av VIERA Link ●● Eksternt utstyr og kabler som er vist følger ikke med denne TV-en. ●● Les også håndboken til utstyret som er koblet til. ●● Hold TV-en unna elektrisk utstyr (videoutstyr osv.
Velge kanal 1. Vis TV-valg med TV. 2. Velg modus med / og trykk OK for å stille inn. DVB-C / DVB-T / Analog ●● Hvilke moduser som kan velges, varierer og er avhengig av de lagrede kanalene. ●● Du kan også velge modus ved å trykke på TV flere ganger. ●● Hvis TV-valg ikke vises, kan du trykke på TV for å skifte modus. 3. Velg en kanal med Kanal opp / ned eller Tallknappene. ●● Trykk på Tallknappene for å velge kanalposisjon med 2 eller flere sifre ). (f.eks.
■■Å velge en kanal ved hjelp av TV Guide 1. Vis TV Guide med GUIDE. 2. Velg gjeldende program med / / / og trykk OK for å få tilgang. – Gjeldende program vises øverst til venstre på skjermen. 3. Trykk på OK for å avslutte TV Guide. Se > TV Guide > Bruke TV Guide ●● Avhengig av hvilket land du velger, kan du bli bedt om å legge inn et postnummer eller foreta en oppdatering. Følg instruksjonene på skjermen.
Informasjonsfelt Vise informasjonsfelt med ●● . Vises også når en skifter kanal. (Eksempel) Kanalposisjon og -navn Kanaltype (Radio, HDTV, osv.) / Kryptert kanal ( ) / TV-modus ( , , ) Program Starttid/sluttid (bortsett fra analog) Kanalposisjon, osv. (Analog) Fremdriftsindikator for det valgte programmet (bortsett fra analog) Kategori ●● For å endre kategori (DVB) 1) Vis kategorilisten med 2) Velg kategori med / (blå). og trykk OK for å endre.
: Tekst TV-tjeneste tilgjengelig : Multilyd tilgjengelig : Multivideo tilgjengelig : Mer lyd og video er tilgjengelig Stereo, Mono: Lydmodus : Datatjeneste (Hybrid Broadcast Broadband TV-applikasjon) tilgjengelig Funksjoner > Data Service Applikasjon > Bruke data service application 1 – 90: Av timer gjenværende tid Se > Grunnleggende > Av timer ●● For å bekrefte en annen innstilt kanal / ●● For å se kanalen som er listet i informasjonsfeltet OK ●● Informasjon om neste program (DVB) ●● For å skjule
●● For å endre fargetypen av visninger på skjermen, still inn Meny fargevalg. Min startskjerm > Min startskjerm > Meny fargevalg ●● For å vise introduksjonsbanneret for Internett-tjenesten 1) Vis menyen med MENU. 2) Velg Oppsett > Skjerminnstillinger > Smart Banner med OK for å gå inn. 3) Velg På / Av med / / og trykk og trykk OK for å stille inn. Tilleggsmeny Kontrollere eller endre gjeldende status. 1. Vis alternativmenyen med OPTION. 2.
Multilyd Velger mellom alternative språk eller lyd-beskrivelse for lydspor (hvis tilgjengelig). ●● Denne innstillingen er ikke lagt inn i minnet og vil gå tilbake til standardinnstilling så snart du går ut av det aktuelle programmet. ●● For DVB Dobbel lyd Velger stereo/mono (hvis tilgjengelig). ●● For DVB Underkanal Velger multifeed-program – underkanal (hvis tilgjengelig). ●● For DVB Språk undertekster Velger språk til undertekster (hvis tilgjengelig).
Undertekst Vis/skjul undertekst (hvis tilgjengelig) med STTL. ●● For å velge foretrukket språk for DVB-undertekster (hvis tilgjengelig) må du stille inn Ønskede undertekster. Se > Grunnleggende > Språk ●● For å velge ønsket type undertekster 1) Vis menyen med MENU. 2) Velg Oppsett > Skjerminnstillinger > Ønsket type undertekster med og trykk OK for å gå inn. 3) Velg Standard / For hørselshemmede med stille inn.
Av timer Sett TV-apparatet automatisk i hvilemodus etter en fast angitt tid med OFF TIMER. ●● Trykk flere ganger til ønsket tid vises. 0 / 15 / 30 / 45 / 60 / 75 / 90 (minutter) ●● For å kansellere, still til 0 eller skru TV-en av. ●● Den gjenværende tiden vises på informasjonsfeltet. Se > Grunnleggende > Informasjonsfelt ●● Når det er mindre enn 3 minutter igjen, vil den gjenværende tiden blinke på skjermen. ●● Du kan også stille inn tiden fra Av timer i timermenyen. 1) Vis menyen med MENU.
■■Automatisk standby 1. Vis menyen med MENU. 2. Velg Timer > Automatisk standby med 3. Velg På / Av med / / og trykk OK for å gå inn. og trykk OK for å stille inn. Automatisk standby (På / Av) Stiller TV-en automatisk til hvilemodus for energisparing når den ikke brukes på 4 timer. ●● Automatisk skifte av inngang med tilkoblet utstyr påvirker denne funksjonen og tidstelleren nullstilles. ●● En melding vises 3 minutter før apparatet går i hvilemodus. ■■Intet signal, strøm av 1. Vis menyen med MENU.
■■Radiomodus Stiller inn timer for å slå av skjermen automatisk når en radiokanal velges. 1. Vis menyen med MENU. 2. Velg Oppsett > Skjerminnstillinger > Radiomodus med for å gå inn. 3. Velg klokkeslett med / / og trykk OK og trykk OK for å gå inn. 20 / 15 / 10 / 5 / Av (sekunder) ●● Lyden er på selv om skjermen slås av. Denne funksjonen reduserer effektivt strømforbruket når du lytter på radio.
Språk 1. Vis menyen med MENU. 2. Velg Oppsett > Språk med / og trykk OK for å gå inn. 3. Velg ett av følgende elementer med / og trykk OK for å gå inn. OSD-språk / Ønsket lydspråk 1 / 2 / Ønskede undertekster 1 / 2 / Ønsket tekst-tv 4. Still inn med / / / og trykk på OK for å lagre. OSD-språk Endrer skjermspråk. Ønsket lydspråk 1 / 2 Velger det første og andre språket som foretrekkes for DVB-multilyd (avhengig av kringkaster).
Eksternt utstyr Ekstern kobling Disse diagrammene viser våre anbefalinger for hvordan TV-en kan tilkobles diverse utstyr. For andre koblinger, se instruksjonene for hver del av utstyret. ●● For grunnkobling Se > Grunnleggende > Enkel tilkobling ●● Sjekk terminaltypen og at kabelpluggene er riktige ved tilkobling. ■■HDMI-utstyr HDMI-terminal HDMI- kabel Opptaker / Spiller / Set-top-boks / Videokamera / Forsterker med høyttalersystem = Merk = ●● Bruk en fullkablet, HDMI-kompatibel kabel.
■■AV-enheter AV2 (COMPONENT)-terminaler Komponentkabler DVD-spiller AV2 (VIDEO)-terminaler Komposittkabler Videokamera / Spillutstyr - 31 -
■■USB-innretning USB-port USB-kabel Kommunikasjonskamera = Merk = ●● Det anbefales å koble enheten direkte til USB-porten på TV-en. ●● Enkelte USB-enheter og USB-huber kan ikke brukes med dette TVapparatet. ●● Du kan ikke koblet til noen enheter ved bruk av en USB-kortleser. ●● Tilleggsinformasjon om enhetene kan finnes på følgende nettsted. http://panasonic.
■■Hodetelefoner Kontakt for hodetelefon M3 stereo miniplugg Hodetelefoner ●● For å justere volumet, sett Hodetelefon vol.. Se > For beste lyd > Avanserte innstillinger ●● For å velge lydeffekt, still inn Høyttalerinnstilling. Se > For beste lyd > Voluminnstillinger Å se på ekstern inngang Koble til det eksterne utstyret (VCR, DVD, osv.), og du kan se gjennom inngangene. 1. Vis menyen for valg av kilde med AV. 2. Velg kildemodus koblet til utstyret med / og trykk på OK for å se.
= Merk = ●● Hvis det eksterne utstyret har en funksjon for å justere bildeformatet, kan du sette denne til 16:9. ●● For detaljer må du se i bruksanvisningen til utstyret, eller spørre din lokale forhandler. ■■Inngangsetiketter Gir tilgang til listen over inngangsetiketter for å velge etikett for hver inngangsmodus, eller for å hoppe over innganger som ikke er tilknyttet. Dette gjør identifisering og valg i TV-valg, Inngangsvalg eller i informasjonsfeltet enklere.
Bruke med TV-ens fjernkontroll Du kan operere innholdet i Media Player / mediaserver, opptaksfunksjoner eller tilkoblet utstyr med de nederste knappene på denne fjernkontrollen til TV-en.
■■Slik endrer du koden Hvert Panasonic-produkt har sin egen fjernkontrollkode. Endre koden i henhold til produktet du ønsker å bruke. 1. Trykk og hold Standby På / Av-bryteren under følgende operasjoner. 2. Skriv inn den riktige koden som følger, med Tallknappene. ●● Koder for hvert produkt og funksjoner 70: DVD-opptaker, DVD-spiller, Blu-ray-spiller 71: Spillanlegg, Blu-ray diskkonsoll 72: VCR 73 (standard): Bruk i Media Player, DLNA-funksjoner eller VIERA Link 3. Trykk på for å endre.
HDMI-funksjoner HDMI (high-definition multimediagrensesnitt) er verdens første komplette digitale forbruker AV-grensesnitt som er kompatibel med en standard som har tapsfri kompresjon. HDMI setter deg i stand til å nyte digitale bilder i høyoppløsning og høykvalitetslyd, ved å koble TV-en sammen med utstyret. HDMI kompatibelt utstyr med en HDMI- eller DVI-utgang, for eksempel en DVD-spiller, en installasjonsboks eller spillutstyr, kan kobles til HDMIkontakten med en HDMI-samsvarende kabel.
= Merk = ●● Lydinnstillinger kan utføres fra HDMI inngang i Lydmenyen. Se > For beste lyd > Avanserte innstillinger ●● Hvis det tilkoblete utstyret har en funksjon for å justere formatforholdet, kan du sette bildeforholdet til “16:9”. ●● Disse HDMI-kontakter er “type A”. ●● Disse HDMI-kontakter er kompatible med HDCP (High-Bandwidth Digital Content Protection) copyright beskyttelse.
■■HDMI-terminal 1 : TMDS Data2+ 11 : TMDS Klokkebeskyttelse 2 : TMDS Data2-beskyttelse 12: TMDS klokke− 3 : TMDS Data2− 13: CEC 4 : TMDS Data1+ 14: Tilbehør 5 : TMDS Data1-beskyttelse 15: SCL 6 : TMDS Data1− 16: SDA 7 : TMDS Data0+ 17: DDC/CEC jord 8 : TMDS Data0-beskyttelse 18: +5V strøm 9 : TMDS Data0− 19: Oppdage hot-plug 10: TMDS klokke+ Gyldige inngangssignaler ■■COMPONENT, HDMI Signalnavn COMPONENT HDMI 525 (480) / 60i, 60p ○ ○ 625 (576) / 50i, 50p ○ ○ 750 (720) / 60p, 50
For beste bilde Bildemodus 1. Vis menyen med MENU. 2. Velg Bilde > Bildemodus med 3. Velg modus med / / og trykk OK for å gå inn. og trykk OK for å stille inn. Bildemodus (Dynamisk / Normal / Cinema / Ekte kino-modus / Tilpasset) Velger din favorittbildemodus for hver inngang. Dynamisk: Forbedrer kontrast og skarphet ved TV-titting i et lyst rom. Normal: Normal bruk for TV-titting ved normale lysforhold Cinema: Forbedrer kontrastresultatene, sort og fargegjengivelse når du ser på filmer i et mørkt rom.
Lyssensor 1. Vis menyen med MENU. 2. Velg Bilde > Lyssensor med 3. Velg På / Av med / / og trykk OK for å gå inn. og trykk OK for å stille inn. Lyssensor (På / Av) ●● Funksjon for automatisk lysstyrkekontroll Justerer bildeinnstillinger automatisk avhengig av rombelysningsforholdene. Aspekt Endre bildeformat (bildestørrelse) med ASPECT. ■■For å velge bildeforholdet manuelt 1. Vis Valg av bildeformat med ASPECT. 2. Velg modus med ●● / og trykk OK for å stille inn.
Sidekutt justert: Viser et “16:9”-letterbox (anamorfisk) bilde på full skjerm. Strekking er kun merkbart på høyre og venstre kant. ●● For HD (høydefinisjon)-signaler Sidekutt Zoom: Viser et “16:9”-letterbox (anamorfisk) bilde på full skjerm uten forvrengning. ●● For HD (høydefinisjon)-signaler = Merk = ●● Vis bildet (TV, ekstern inngang osv.) i fullskjerm for å bruke denne funksjonen fult ut. ●● Formatmodus kan lagres separat for SD -(standarddefinisjon) og HDsignaler (høy definisjon).
Aspekt-styresignal Programmer inneholder som regel et “Aspekt-styresignal”. (Widescreensignal, styresignal kun via SCART / HDMI-terminal) I Auto-modus, kommer aspektmodusen til syne i øverste venstre hjørne av skjermen, hvis et Widescreen-signal (WSS) eller et kontrollsignal blir oppdaget via en SCART (pin8) / HDMI-terminal. Bildeformatet vil kobles om til det egnete forholdet.
●● AV2 (COMPONENT)-terminaler (bare WSS) Gyldig format på inngangssignal: 625 (576) / 50i, 50p Ugyldig format på inngangssignal: 525 (480) / 60i, 60p 750 (720) / 60p, 50p 1 125 (1 080) / 60i, 50i ●● HDMI-terminal Gyldig format på inngangssignal: 525 (480) / 60i, 60p 625 (576) / 50i, 50p 750 (720) / 60p, 50p 1 125 (1 080) / 60i, 50i 1 125 (1 080) / 60p, 50p, 24p ●● HDMI-terminal mottar ikke WSS-signal.
Grunninnstillinger 1. Vis menyen med MENU. 2. Velg Bilde med / og trykk OK for å få tilgang. 3. Velg ett av følgende elementer med / og trykk OK for å gå inn. Bakgrunnslys / Kontrast / Lysstyrke / Farge / Fargebalanse / Skarphet / Fargetemperatur / Sterke farger / Tilpasset baklyskontroll 4. Still inn med / / / og trykk på OK for å lagre. Bakgrunnslys, Kontrast, Lysstyrke, Farge, Fargebalanse, Skarphet Justerer nivåene til disse valgmulighetene, i samsvar med din personlige preferanse.
Støyreduksjonsinnstillinger 1. Vis menyen med MENU. 2. Velg Bilde > Bilde støyreduksjon / MPEG Støyreduksjon med trykk OK for å gå inn. 3. Still inn med / / og og trykk på OK for å lagre. Bilde støyreduksjon (Auto / Maksimum / Middels / Minimum / Av) Reduserer uønsket bildestøy. ●● Ikke gyldig når 1080p Uskalert er satt til På for 39/42/50-tommers modell MPEG Støyreduksjon (Auto / Maksimum / Middels / Minimum / Av) Reduserer flimring i konturene i et bilde og blokkerer støy.
■■Kontrast regulering Kontrast regulering (Auto / Custom / Av) Justerer automatisk de detaljerte kontrastinnstillingene. Velg Custom for å stille inn Innstilling for kontrast manuelt. Innstilling for kontrast Automatisk Gamma-kontroll: Justerer gamma-kurven for å gjøre bildet skarpere. Utvider sortnivået: Justerer svartnyansene gradvis. Tilbakestill til standard: Tilbakestiller punktene til Innstilling for kontrast.
■■Fargestyring R-tone / R-metning / R-luminans Justerer bildenyansen / fargemetningen / luminansen for røde områder. G-tone / G-metning / G-luminans Justerer bildenyansen / fargemetningen / luminansen for grønne områder. B-tone / B-metning / B-luminans Justerer bildenyansen / fargemetningen / luminansen for blå områder. Tilbakestill til standard Stiller tilbake Fargestyring til standardinnstillingene. ■■Gamma Gamma Bytter gammakurve. ●● Legg merke til at tallverdiene er referanser for justering.
Tilleggsinnstillinger 1. Vis menyen med MENU. 2. Velg Bilde > Tilleggsinnstillinger med 3. Velg ett av følgende elementer med / / og trykk OK for å gå inn. og trykk OK for å gå inn. Film kildemodus / 1080p Uskalert / HDMI-innholdstype / HDMI RGB-nivå / AV-fargesystem / 3D-COMB 4. Still inn med / og trykk på OK for å lagre. Film kildemodus (På / Av) Forbedrer vertikal oppløsning for filmbilder. ●● Denne funksjonen er tilgjengelig for sammenflettede signaler (unntatt nettverkstjenester).
AV-fargesystem (Auto / PAL / SECAM / M.NTSC / NTSC) Velger valgfritt fargesystem basert på videosignaler. ●● For AV-inngang 3D-COMB (På / Av) Gjør rolige og saktegående filmer mer livlige. ●● Mens en ser på stillbilder eller bilder som beveger seg sakte, kan en noen ganger se fargemønstre. Sett til På for å vise skarpere eller mer nøyaktige farger.
Skjerminnstillinger 1. Vis menyen med MENU. 2. Velg Bilde > Skjerminnstillinger med / og trykk OK for å gå inn. 3. Velg ett av følgende elementer med / og trykk OK for å gå inn. 16:9 overscan / Horisontal størrelse / Zoom justeringer / Skjermvisning 4. Still inn med / og trykk på OK for å lagre. 16:9 overscan (På / Av) Velger skjermområdet som viser bildet i forholdet 16:9. På: Forstørrer bildet for å skjule kantene. Av: Viser bildet i originalstørrelsen.
Kopier justering Kopierer bildeinnstillingene Ekte kino-modus eller Tilpasset til de med en annen inngang eller visningsmodus. 1. Vis menyen med MENU. 2. Velg Bilde > Kopier justering > Dest bildemodus / Mål med OK for å åpne. 3. Velg sted der du vil lagre kopien på med 4. Velg Start kopiering med / / og trykk og trykk OK for å stille inn. og trykk OK for å kopiere. 5. Når bekreftelsesskjermen vises, velg Ja med stille inn.
For beste lyd Lydmodus 1. Vis menyen med MENU. 2. Velg Lyd > Lydmodus med 3. Velg modus med / / og trykk OK for å gå inn. og trykk OK for å stille inn. Lydmodus (Standard / Musikk / Tale / Bruker) Velger din favorittlydmodus for hver inngang. Standard: Gir egnet lydkvalitet for alle typer scener. Musikk: Forbedrer lydkvaliteten på musikkvideoer og lignende. Tale: Forbedrer lydkvaliteten på nyheter, dramaer og lignende.
Grunninnstillinger 1. Vis menyen med MENU. 2. Velg Lyd med / og trykk OK for å få tilgang. 3. Velg ett av følgende elementer med / og trykk OK for å gå inn. Bass / Diskant / Equalizer / Balanse / Surround 4. Still inn med / / / og trykk på OK for å lagre. Bass Justerer nivået for å forsterke eller minimalisere lavere, dypere lydutgang. Diskant Justerer nivået for å forsterke eller minimalisere skarpere, høyere lydutgang. Equalizer Justerer frekvensnivået slik at du får din favorittlydkvalitet.
Voluminnstillinger 1. Vis menyen med MENU. 2. Velg Lyd med / og trykk OK for å få tilgang. 3. Velg ett av følgende elementer med / og trykk OK for å gå inn. Høyttalerinnstilling / Hodetelefon vol. / Auto-volumregulering / Volum korreksjon / TV avstand til veggen 4. Still inn med / / / og trykk på OK for å lagre. Høyttalerinnstilling (TV-høyttalere / Hodetelefoner / Av) Velger TV-høyttalere eller hodetelefoner for lydutgang. Settes til Av ved bruk av eksterne høyttalere. Hodetelefon vol.
Stemmeveiledning 1. Vis menyen med MENU. 2. Velg Lyd > Stemmeveiledning med / 3. Velg ett av følgende elementer med og trykk OK for å gå inn. / og trykk OK for å gå inn. Stemmeveiledning / Hastighet / Lydstyrke / Språk / Brukernivå / Nettleser 4. Still inn med / / / og trykk på OK for å lagre. Stemmeveiledning (På / Av) Still til På for å aktivere talestyring av de grunnleggende funksjonene (menyelement, skjermeldinger, osv.) for brukere med nedsatt syn.
Lydbeskrivelse 1. Vis menyen med MENU. 2. Velg Lyd > Lydbeskrivelse med / 3. Velg ett av følgende elementer med og trykk OK for å gå inn. / og trykk OK for å gå inn. Foretrukket lydmodus / Lydstyrke / Høyttalere / Hodetelefoner 4. Still inn med / / / og trykk på OK for å lagre. Foretrukket lydmodus (Standard / Lydbeskrivelse) Innstillinger for lydkommentarer for brukere med svekket syn Still til Lydbeskrivelse for å aktivere fortellingslydspor når det er tilgjengelig i kringkastingen.
Avanserte innstillinger 1. Vis menyen med MENU. 2. Velg Lyd med / og trykk OK for å få tilgang. 3. Velg ett av følgende elementer med / og trykk OK for å gå inn. MPX / Lydpreferanse / SPDIF-valg / SPDIF-forsinkelse / HDMI inngang 4. Still inn med / og trykk på OK for å lagre. MPX Velger multipleks lydmodus (hvis tilgjengelig). Stereo: Bruk dette normalt.
●● MPEG er en lydkomprimeringsmetode som komprimerer lyd til en mindre størrelse uten at lydkvaliteten forringes vesentlig. ●● Dolby Digital Plus og HE-AAC er teknologier for HD- (Høyoppløsning) programmer. ●● For DVB SPDIF-valg (Auto / PCM) Velger grunninnstilling for digitalt lydsignal fra DIGITAL AUDIO og HDMI2 (ARC-funksjon). ●● SPDIF er et standard filformat for lydoverføring. Auto: Dolby Digital Plus, Dolby Digital og HE-AAC multi-kanal mates ut som Dolby Digital Bitstream.
TV Guide Bruke TV Guide TV Guide – Elektronisk programguide (EPG) gir en liste på skjermen over programmene som kringkastes i øyeblikket, og over sendingene de neste sju dagene (avhengig av kringkastingsselskap). 1. Vis TV-valg med TV. 2. Velg modus med / og trykk OK for å stille inn. DVB-C / DVB-T / Analog 3. Vis TV Guide med GUIDE. ●● Trykk på nytt for å endre oppsett. (Liggende / Stående) – Se Liggende for å se flere kanaler. – Vis Stående for å se en kanal ad gangen.
(Eksempel) TV-skjerm Dato Tid Program D (DVB-T) / A (Analog) Kanalposisjon og -navn ●● Å se programmet 1) Velg gjeldende program med / / / . – Gjeldende program vises øverst til venstre på skjermen. 2) Trykk OK for å se. ●● Til foregående dag (DVB) (rød) ●● Til neste dag (DVB) (grønn) ●● Å se en kanalliste for den valgte typen 1) Vis typelissten med 2) Velg typen med / (gul). og trykk OK for å se.
●● Å søke etter programtitler og se en liste over søkte programmer (DVB) (hvis tilgjengelig) 1) Vis søkelisten med 2) Velg Søk med / 3) Tast inn tegn med (gul). og trykk OK for å få tilgang. / / / og trykk OK for å stille. – Du kan stille inn tegn ved å bruke Tallknappene. Funksjoner > Stille inn tegn > Bruke tallknapper 4) Trykk på (grønn) for å starte søking. – Alle programtitlene, inkludert ordet du angir, vil vises.
= Merk = ●● Når TV-en slås på for første gang, eller når den har vært avslått i over en uke, kan det ta noe tid før TV Guide vises fullstendig. ●● Denne funksjonen varierer avhengig av landet du velger. ●● Postnummer eller en oppdatering kan være nødvendig for å bruke systemet GUIDE Plus+. Dette avhenger av hvilket land du valgte. 1) Vis menyen med MENU. 2) Velg Oppsett > Andre innstillinger > GUIDE Plus+ innstillinger med og trykk OK for å gå inn. / 3) Følg instruksjonene på skjermen.
Tekst-TV Visning av Tekst-TV 1. Skift til tekst-TV med TEXT. ●● Viser indekssiden (innholdet varierer avhengig av kringkastingsselskap). ●● Gjeldende / undersidetall vises øverst til venstre på skjermen. ●● Tid / dato vises øverst til høyre på skjermen. ●● Fargesøylen vises nederst på skjermen. 2. Velg siden med Tallknappene, knapper). ●● / eller Å justere kontrast 1) Trykk MENU tre ganger for å vise Kontrast. 2) Juster med ●● / og trykk på OK for å stille inn.
■■Å se på TV og tekst-TV i to vinduer samtidig 1. Trykk MENU to ganger. 2. Still Bilde og tekst til På / Av med ●● / . Operasjoner kan kun utføres i tekst-TV skjerm. ■■Lagre ofte viste sider i fargesøylen (Listemodus) 1. Trykk på (fargede knapper) mens siden vises. 2. Trykk og hold OK. ●● Det lagrede sidetallet skifter til hvitt. ●● Å endre lagrete sider 1) Trykk på (fargede knapper) for å endre. 2) Skriv inn et nytt sidetall med Tallknappene. 3) Trykk og hold OK.
Tekst-TV-modus Tekst-TV tjenester er tekstinformasjon levert av kringkastingsselskapene. ●● Tjenestene kan variere avhengig av kringkastingsselskapene. 1. Vis menyen med MENU. 2. Velg Oppsett > Skjerminnstillinger > Tekst-TV med å gå inn. 3. Velg TOP (FLOF) / Liste med / / og trykk OK for og trykk OK for å stille inn. ■■FLOF (FASTEXT)-modus I FLOF-modus er fire emner i forskjellige farger plassert nederst på skjermen.
Tekst tv bokstaver Velger språkskrifttype for tekst-TV. 1. Vis menyen med MENU. 2. Velg Oppsett > Skjerminnstillinger > Tekst tv bokstaver med trykk OK for å gå inn. 3. Velg font med / / og og trykk OK for å stille inn. Vest: Engelsk, fransk, tysk, gresk, italiensk, spansk, svensk, tyrkisk osv. Øst1: Tsjekkisk, engelsk, estisk, latvisk, rumensk, russisk, ukrainsk osv. Øst2: Tsjekkisk, ungarsk, latvisk, polsk, rumensk osv.
Innstilling og redigering av kanaler Innstillingsmeny Du kan søke inn kanaler på nytt, lage din egen liste over favorittkanaler, utelate uønskede kanaler osv. 1. Vis TV-valg med TV. 2. Velg modus med / og trykk OK for å stille inn. DVB-C / DVB-T / Analog 3. Vis menyen med MENU. 4. Velg Oppsett > Søkemeny med / og trykk OK for å gå inn. Søkemeny DVB-C / Søkemeny DVB-T / Søkemeny analog ●● Menynavnet varierer avhengig av TV-modus. 5. Velg en av følgende funksjoner med / og trykk OK for å gå inn.
Favorittredigering ■■Å lage en liste over favoritt-DVB-kanaler Lag din egen favorittkanal-liste fra forskjellige kringkastingsselskaper (opptil 4: Favoritter 1 til 4). Favorittlistene er tilgjengelig fra Kategori i informasjonsfeltet og på TV Guideskjermen. Se > Grunnleggende > Informasjonsfelt Se > TV Guide > Bruke TV Guide 1. Velg Favorittredigering med / og trykk OK for å få tilgang. 2. Velg en kanal i listen fra alle DVB-kanaler med ●● ●● / . kommer til syne når kanalen er kryptert.
■■Endre DVB-favorittlisten Du kan redigere favorittlisten mens markøren er på kanalen i favorittlisten. ●● Å flytte kanalen 1) Velg kanalen med 2) Trykk på / . (grønn). 3) Velg den nye posisjonen med 4) Trykk på ●● / eller Tallknappene. (grønn) for å lagre. For å slette kanalen 1) Velg kanalen med / . 2) Trykk på OK for å slette. – Trykk på ●● (gul) for å slette alle kanaler. Å sette navn på favoritter 1) Trykk på (rød).
Kanalliste ■■Utelat uønskede DVB-/analoge kanaler Du kan skjule (hoppe over) uønskede kanaler. De skjulte kanalene kan ikke vises, bortsett fra med denne funksjonen. 1. Velg Kanalliste med 2. Velg en kanal med / / og trykk OK for å få tilgang. . 3. Trykk på OK for å stille inn Vis / Skjul (hoppe over).
●● Å gi kanalen nytt navn (Analog) 1) Trykk på (blå) for å redigere. 2) Skriv inn tegn (maksimalt 5 tegn) med / Tallknappene og trykk OK for å stille inn. / / eller 3) Trykk på BACK/RETURN for å lagre. = Merk = ●● Hvis en VCR bare er tilkoblet med RF-kabelen i analog, rediger VCR. Automatisk kanalsøk Stiller inn automatisk på nytt kanaler som tas inn i området. ●● Denne funksjonen er kun tilgjengelig hvis kanalsøk allerede er utført. ●● Kun valgt modus søkes på nytt.
3. Bekreftelsesskjermen vises, og trykk OK for å starte Automatisk kanalsøk. (Innstillinger gjøres automatisk.) ●● Når operasjonen er fullført, vil kanalen i laveste posisjon vises. ■■Automatisk kanalsøk bruke knappene på TV-en 1. Trykk og hold inne INPUT/OK/HOLD for MENU-knappen i 3 sekunder for å vise menyen. 2. Still inn Automatisk kanalsøk med følgende kontrollpanelknapper.
Manuell søking ●● Normalt brukes Automatisk kanalsøk eller Oppdater kanalliste for å søke inn DVB-kanaler på nytt. ●● Hvis søkingen ikke er helt fullført, eller hvis du skal justere retningen på antennen, kan du bruke denne funksjonen. (DVB) ●● Alle DVB-kanaler som finnes, vil bli lagt til Kanalliste. ■■DVB-C 1. Legg inn frekvensen med Tallknappene. ●● Vanligvis settes Symbolrate og Service-ID til Auto. 2. Velg Start søk med / og trykk OK for å søke. / og juster frekvensen med ■■DVB-T 1.
4. Velg Lagre med / og trykk OK for å stille inn. ●● Bruk Fininnstilling til å foreta små justeringer av innstillingen til et individuelt program (påvirket av værforhold, osv.). ●● Hvis en VCR bare er tilkoblet med RF-kabelen, må du velge kanalposisjon 0. Oppdater kanalliste Ved å oppdatere DVB-kanallisten kan du legge til nye kanaler, slette kanaler du har fjernet, eller skifte kanalnavn og -posisjoner automatisk.
Andre innstillinger Favorit nettverk Velger ditt favorittnettverk for hver av kringkastingsselskapene (kun tilgjengelig i enkelte land). ●● For DVB-C, DVB-T Erstatningskanal (På / Av) Sett til På for å aktivere en melding om å skifte til tilgjengelig tjeneste (tilgjengelig bare i enkelte land). ●● For DVB-C Kanaldemper (På / Av) Setter antennesystemet til å bruke flere LNBer for mottak av flere satellitter. ●● Hvis DVB-C-signalet er for kraftig, kan det oppstå forstyrrelser.
Media Player Bruke Media Player Informasjon Media Player gjør det mulig å nyte bilder, video eller musikk som er tatt opp på et USB-flashminne /nettverksenhet. (Eksempel) Fotomodus: Stillbilder som er tatt med digitalkamera, vises. Videomodus: Bevegelige bilder som er tatt opp med digitale videokamera vil avspilles. Musikkmodus: Digital musikkdata vil avspilles. ●● Under bruk sendes lydsignaler ut på DIGITAL AUDIO og HDMI2 (ARCfunksjon)-terminalene. Men ingen videosignaler sendes ut.
■■Å sette inn eller ta ut USB-flashminne Sikre innretningen er rett og fullstendig ved innsetting og uttaking. ●● For å koble USB-flashminnet fra TV-en på en trygg måte, utfør Fjern sikkert i Oppsett USB-enhet. 1) Vis menyen med MENU. 2) Velg Oppsett > Oppsett USB-enhet med inn. 3) Velg enheten med / og trykk / og trykk OK for å gå (gul) for å stille inn. = Merk = ●● Sjekk at terminaltypen og enhetene er korrekte ved tilkobling.
Velge enhet / modus 1. Sett USB-flashminnet i TV-en. Media Player > Bruke Media Player > Informasjon ●● For å spille av innholdet i nettverksenheten, sjekk at tilkoblingen og innstillingene er fullført. Media Player > Bruke Media Player > Nettverksenhet 2. Vis APPS-liste med APPS. 3. Velg Media Player med 4. Velg enheten med / / / / og trykk OK for å få tilgang. og trykk OK for å gå inn. ●● Hvis bare én enhet er tilkoblet, vil dette trinnet hoppes over.
= Merk = ●● Du kan også gå inn på hver modus direkte fra APPS-liste. Min startskjerm > APPS-liste > Hvordan bruke ●● Velg den riktige innretningen og innholdet for avspilling av hver enkelt fil. ●● Du kan bruke følgende knapper under avspillingen. Bekreft at fjernkontrollkoden er “73”. Se > Eksternt utstyr > Bruke med TV-ens fjernkontroll ■■For å endre enheten Du kan skifte ut nåværende enhet direkte i samme modus hvis to eller flere tilgjengelige enheter er tilkoblet. 1.
Nettverksenhet Du kan nyte bilder, video eller musikk lagret på nettverksenhetene. ●● Du må koble TV-en til hjemmenettverket ditt for å aktivere denne funksjonen. Nettverk > Nettverksforbindelser Nettverk > Nettverksinnstillinger ■■Hvordan å stille inn Bruker / Passord 1. Vis menyen med MENU. 2. Velg Nettverk > Innstilling for fildeling > Liste over nettverksenheter med / og trykk OK for å gå inn. 3. Velg nettverksenheten med 4. Tast inn Bruker / Passord med OK for å stille inn.
Fotomodus Velge filen Velg fotoet i miniatyrbildevisningen med starte avspilling. / / / og trykk OK for å : Feilvisning ●● Endre størrelsen på bilder på miniatyrbildeskjermen 1) Vis alternativmenyen med OPTION. 2) Velg Endre størrelsen med ●● / og trykk OK for å endre.
Se bilde ■■Avspilling ●● Bruke Vis bilde : Til forrige bilde : Til neste bilde : Stopp (Gå tilbake til miniatyrbilde) OK : Slide-show ●● Vise eller skjule funksjonsveiledningen ●● Rotere 90° (blå) ●● Gå tilbake til miniatyrbilde BACK/RETURN Sortere bilder ■■Sortere etter mappe, opptaksdato eller opptaksmåned 1. Vis visningsvalget i miniatyrvisningen med (grønn). 2. Velg Vis mappe / Datosortering / Månedssortering med for å stille inn.
Bruke slideshow Slideshow avsluttes når alle bildene i miniatyrbildet har blitt sett. 1. Velg filen fra miniatyrbildet av bildene, som skal vises først med / . 2. Start slideshow med / / (rød) og OK. ●● Vise eller skjule funksjonsveiledningen ●● Stoppe (tilbake til Vis bilde) OK ●● Gå tilbake til miniatyrbilde BACK/RETURN ●● Du kan endre bakgrunnsmusikken ved å stille inn Bakgrunnsmusikk i Slide-showinnstillinger (se nedenfor). ■■Slide-showinnstillinger Foreta innstillinger for bildemodus. 1.
Galleri(+kalender) / Galleri: Ulike størrelser på bilder i rammen vises. ●● Du kan velge å vise kalenderen eller ikke. Kalendermåneden / . forandres med Cinema: Bilder vises som gamle filmer (sepia-tone). Fargeeffekt (Av / Sepia / Gråskala) Velger fargeeffekter for fotografier. ●● Ikke gyldig når Ramme er satt til Flyt, Galleri eller Cinema Overgangseffekt (Av / Uttoning / Overblending / Bevegelse / Tilfeldig) Velger overgangseffekt for å bytte bilder under slideshow.
Skjermmodus (Normal / Zoom) Velger enten forstørret eller normal visning. ●● Ikke gyldig når Ramme er satt til Fotomontasje, Flyt, Galleri, Cinema eller når Overgangseffekt er satt til Bevegelse ●● Avhengig av bildestørrelse, er det ikke sikkert at det fyller hele skjermen, (for eksempel ved portrettstil). Kontinuerlig visning (På / Av) Velger om det skal vises kontinuerlige bilder i hurtig slideshowmodus eller ikke.
Bakgrunnsmusikk (Av / Type1 / Type2 / Type3 / Type4 / Type5 / Bruker / Auto) Velger bakgrunnsmusikk for bildemodus. Type1 - 5: Musikkfiler installert på denne TV-en på fabrikkinnstillinger vil bli avspilt. Auto: Musikkfiler som er lagret i den aktuelle enheten vil bli avspilt. ●● Hvis det ikke er noen tilgjengelige musikkdata, vil det ikke spilles av noen lyd. Bruker: Musikkfiler i enheten, som du selv har registrert, spilles av.
Videomodus Velge filen 1. Velg tittelen i miniatyrvisningen med / / / . : Feilvisning : Filmikonet vil vises hvis filen ikke støtter miniatyrbildevisning. ●● Forhåndsvisningen starter når tittelen / scenen er fremhevet i miniatyrvisningen hvis den støtter forhåndsvisning. For å slå av forhåndsvisningen, still på Videoforhåndsvisning for å Av. Media Player > Videomodus > Videokonfigurasjon 2. Start avspilling med ●● ●● (rød).
Se video ■■Spill av fra den valgte scenen i tittelen Avspillingen av den valgte scenen vil starte og fortsette til slutten av tittelen. 1. Velg tittel med / 2. Velg scene med / / / / 3. Start avspilling med og trykk OK for å gå inn. / . (rød). ●● Strukturen på titler og scener kan variere avhengig av hvilket digitalkamera som brukes. ●● Avspilling vil kanskje ikke forsette avhengig av tilstand.
●● Endre sideforhold 1) Vis Valg av bildeformat med ASPECT. 2) Velg modus med / og trykk OK for å stille inn. Bildesideforhold1: Viser innholdet forstørret uten forvrengning. Bildesideforhold2: Viser innhold i fullskjermbilde. Original: Viser innholdets originale størrelse. – Du kan også endre modus ved å trykke ASPECT. (Trykk gjentatt inntil du kommer frem til den ønskede modusen.) – Bildeformat kan ikke endres, avhengig av innholdet.
Videokonfigurasjon Foreta innstillinger for videomodus. 1. Vis alternativmenyen med OPTION. 2. Velg Videokonfigurasjon med OK. 3. Velg ett av følgende elementer med / og trykk OK for å gå inn. Videoforhåndsvisning / Multilyd / Dobbel monolyd / Undertekst / Undertekst / Repetisjon ●● Menypunkter og valgalternativer varierer med innholdet. 4. Still inn med / / / og trykk på OK for å lagre.
Innstillinger for lydutgang ●● Å bekrefte eller endre nåværende lydstatus Media Player > Videomodus > Videokonfigurasjon 1. Vis menyen med MENU. 2. Velg Lyd > SPDIF-valg med 3. Velg Auto / PCM med / / og trykk OK for å gå inn. og trykk OK for å stille inn. SPDIF-valg (Auto / PCM) Velger grunninnstilling for digitalt lydsignal fra DIGITAL AUDIO og HDMI2 (ARC-funksjon). ●● SPDIF er et standard filformat for lydoverføring.
Musikkmodus Velge filen 1. Velg mappen i miniatyrvisningen med 2. Start avspilling med ●● / / / . (rød).
Spille av musikk ■■Avspilling av den valgte filen i mappen 1. Velg mappe med 2. Velg fil med / / / / / / og trykk OK for å gå inn. . 3. Start avspilling med (rød). ■■Avspilling ●● Bruke avspilling : Spol tilbake : Spole frem : Stopp OK : Pause (viser tidssøkelinjen) / Avspilling. ●● Å hoppe til angitt tidspunkt 1) Vis tidssøkelinjen med OK. 2) Mens tidssøkelinjen vises Trykk / : Søk ca. 10 sekunder Trykk og hold / : Hurtigsøk 3) Hopp til angitt tidspunkt med OK.
Musikkinnstillinger Foreta innstillinger for musikkmodus. ●● Denne funksjonen er tilgjengelig i miniatyrbildevisning. 1. Vis alternativmenyen med OPTION. 2. Velg Musikkinnstillinger > Repetisjon med OK. 3. Velg Mappe / En / Av med / og trykk OK for å stille inn.
Teknisk informasjon Behandle enheter forsiktig ●● Data modifisert med en PC vil muligens ikke vises. ●● Ikke ta ut enheten mens TV-en får tilgang til dataene. Ellers kan enheten eller TV-en skades. ●● Ikke berør tappene på enheten. ●● Ikke utsett enheten for høyt trykk eller støt. ●● Sett inn enheten i riktig retning. Ellers kan enheten eller TV-en skades. ●● Elektrisk støy, statisk elektrisitet eller feilaktig håndtering kan ødelegge dataene eller enheten.
Fotoformat ■■Støttede fotoformater ●● JPEG (.jpg, .jpeg) Sub-sampling: 4:4:4, 4:2:2, 4:2:0 Bildeoppløsning (piksel): 8 × 8 til 30 719 × 17 279 ●● DCF- og EXIF-standarder ●● Progressive JPEG er ikke støttet. = Merk = ●● Noen filer avspilles kanskje ikke, selv når de oppfyller disse betingelsene. ●● Ikke bruk multi-bytestegn eller andre spesialkoder for filnavn. ●● Tilkoblede enheter kan bli ubrukelig med dette TV-apparatet hvis fil- eller mappenavnene endres.
Videoformat ■■Støttede videoformater ●● AVI (.avi) Video-codec: H.264 BP/MP/HP, MPEG1, MPEG2, MPEG4 SP/ASP, VC-1, Windows Media Video Ver. 9 Lyd-codec: AAC, ADPCM, Dolby Digital, Dolby Digital Plus, DTS kjerne, HE-AAC, LPCM, MPEG Audio, MP3, WMA, WMA Pro ●● Noen undertekster eller kapittelfunksjoner kan være utilgjengelige. ●● MP4 (.f4v, .m4v, .mp4) Video-codec: H.
●● FLV (.flv) Video-codec: H.264 BP/MP/HP Lyd-codec: AAC, MP3 ●● 3GPP (.3gp, .3g2) Video-codec: H.264 BP/MP/HP, MPEG4 SP/ASP Lyd-codec: AAC, HE-AAC ●● PS (.mod, .mpg, .mpeg, .vob, .vro) Video-codec: H.264 BP/MP/HP, MPEG1, MPEG2, VC-1 Lyd-codec: AAC, Dolby Digital, Dolby Digital Plus, HE-AAC, LPCM, MPEG Audio, MP3 ●● TS (.mts, .m2ts, .tp, .trp, .ts, .tts) Video-codec: H.
■■Støttede undertekstformater ●● MicroDVD, SubRip, TMPlayer (.srt, .sub, .txt) ●● Videofilen og undertekstfilen ligger i samme mappe, og de har samme filnavn bortsett fra filtypen. ●● Hvis det er flere enn én tekstingsfil i samme mappe, vises de i følgende rekkefølge: “.srt”, “.sub”, “.txt”. = Merk = ●● Noen filer avspilles kanskje ikke, selv når de oppfyller disse betingelsene. ●● Ikke bruk multi-bytestegn eller andre spesialkoder for filnavn.
Musikkformat ■■Støttede musikkformater ●● MP3 (.mp3) ●● AAC (.m4a) ●● Kopibeskyttede filer kan ikke spilles av. ●● FLAC (.flac) ●● WMA / WMA Pro (.wma) ●● Kopibeskyttede filer kan ikke spilles av. ●● WMA Lossless støttes ikke. ●● LPCM (.wav) = Merk = ●● Noen filer avspilles kanskje ikke, selv når de oppfyller disse betingelsene. ●● Ikke bruk multi-bytestegn eller andre spesialkoder for filnavn. ●● Tilkoblede enheter kan bli ubrukelig med dette TV-apparatet hvis fil- eller mappenavnene endres.
Nettverk Internett-innhold Informasjon Du kan få tilgang til noen spesifikke nettsider som støttes av Panasonic og nyte Internett-innhold som videoer, spill, kommunikasjonsverktøy osv. fra APPS-liste. (Eksempel) ●● For å aktivere denne funksjonen trenger du et bredbåndsnettverksmiljø. Forsikre deg om at nettverksforbindelsene og nettverksinnstillingene er fullført.
Velge Internett-innhold 1. Vis APPS-liste med APPS. ●● For informasjon om APPS-liste Min startskjerm > APPS-liste ●● Avhengig av bruksforholdene kan det ta litt tid å lese alle dataene. 2. Velg ønsket element med / / / og trykk OK for å gå inn. (Eksempel) ●● Gå tilbake til APPS-liste APPS ●● Avslutte APPS-liste EXIT ●● Du kan koble til et tastatur og en spillkonsoll for tegninnsetting og for å spille spill i programmene.
Merk ●● Hvis du ikke kan få tilgang til Internett-innhold må du kontrollere nettverkstilkoblingene og innstillingene. Nettverk > Nettverksforbindelser Nettverk > Nettverksinnstillinger ●● APPS-liste kan endres uten forvarsel. ●● Ikke alle funksjonene er tilgjengelige på nettsidene. ●● Se til å oppdatere programvaren når en programvareoppdateringsmelding vises på TV-skjermen. Hvis programvaren ikke er oppdatert er det mulig du ikke kan bruke APPS-liste. Du kan oppdatere programvaren manuelt senere.
DLNA Informasjon Dette TV-apparatet er et DLNA Certified™-produkt. DLNA® (Digital Living Network Alliance) er en standard som gjør det enklere å bruke DLNA Certified digital elektronikk på et hjemmenettverk. For å lære mer, besøk www.dlna.org. ●● Du må koble TV-en til hjemmenettverket ditt for å aktivere denne funksjonen.
●● For å bruke en PC som en mediaserver Klargjør PC-en med Windows 7 / Windows 8 for å sikre at serverprogramvaren er installert på PC-en. “Windows 7 / Windows 8” og “Twonky 7 (installert på PC-en med Windows XP eller Mac)” er serverprogrammet som er testet for kompatibilitet med denne TV-en (fra desember, 2013). Ingen annen serverprogramvare har blitt testet med dette TV-apparatet, derfor kan ikke kompatibilitet og ytelse sikres.
■■Spille av delt innhold på denne TV-en med DMCnettverksutstyr (Digital Media Controller) Du kan glede deg over innhold som er lagret på mediaserveren ved å kontrollere det med DMC-nettverksutstyr (smarttelefon, PC med Windows 7 / Windows 8 installert osv.) som er koblet til hjemmenettverket ditt. ●● For å bruke denne funksjonen med en smarttelefon eller Windows 7 / Windows 8, må du stille inn App-innst. for TV Remote på denne TV-en. Nettverk > Nettverksinnstillinger > App-innst.
= Merk = ●● For å bruke denne funksjonen må du skru på denne TV-en. ●● Denne funksjonen er bare tilgjengelig sammen med 1 annen enhet. ●● Du vil kanskje kunne kontrollere denne TV-en for å skru av skjermen og dempe lyden, ved hjelp av smarttelefonen din. For mer informasjon, se brukerstøtteinformasjon om appen. Bruke DLNA For å bruke DLNA®-funksjoner må du sørge for at forberedelsene av mediaserveren, nettverksforbindelsene og nettverksinnstillingene er fullført.
Nettverksforbindelser Internett-tilkobling For å bruke Internett-tjenester trenger du et bredbåndsnettverksmiljø. ●● Hvis du ikke har bredbåndsnettverkstjenester, ta kontakt med din forhandler for hjelp. ●● Oppringt Internettforbindelse kan ikke brukes. ●● Nødvendig effektiv hastighet: minst 1,5 Mbps for SD (Standard Definition) og 6 Mbps for HD-kvalitet (High Definition). Hvis overføringshastigheten er for lav, er det ikke sikkert at innholdet spilles av riktig.
DLNA-tilkobling For å bruke DLNA-funksjoner må du ha et hjemmenettverk, og du kan bruke funksjonene uten et bredbåndsnettverk. ●● For å bruke Internett-tjenester trenger du et bredbåndsnettverksmiljø. Nettverk > Nettverksforbindelser > Internett-tilkobling ■■Trådløs tilkobling (for DLNA og Internett-tjeneste) Innebygd trådløst LAN (bak på TV-en) Tilgangspunkt Hub eller ruter Internettmiljø Smarttelefon DLNA Certified mediaserver (PC, osv.
■■Kablet tilkobling (for DLNA og Internett-tjeneste) ETHERNET-terminal LAN-kabel (Beskyttet) ●● Bruk Shielded Twist Pair (STP) LAN-kabel. Hub eller ruter Internettmiljø DLNA Certified mediaserver (PC, osv.) ■■Trådløs tilkobling (for DLNA) TV ●● For å bruke TV-en som et trådløst tilgangspunkt Nettverk > Nettverksinnstillinger > Manuell - Trådløs ruter DLNA Certified mediaserver (PC, osv.
Merk ●● Bruk en rett nettverkskabel. ●● Sett opp og koble til nødvendig utstyr for nettverksmiljøet. Du kan ikke foreta slike innstillinger på denne TV-en. Les bruksanvisningen til utstyret. ●● Hvis modemet ikke har bredbåndsruterfunksjoner, skal du bruke en bredbåndsruter. ●● Hvis modemet har bredbåndsruterfunksjoner, men ingen ledige porter, kan du bruke en hub. ●● Forsikre deg om at bredbåndsruterne og nettnavnene er kompatible med 10BASE-T / 100BASE-TX.
Nettverksinnstillinger Nettverkstilkobling Forsikre deg om at alle tilkoblinger er i orden før du starter nettverksoppsett. Nettverk > Nettverksforbindelser ■■Auto - Trådløst 1. Vis menyen med MENU. 2. Velg Nettverk > Nettverkstilkobling med ●● / og trykk OK for å få tilgang. Kablet installasjon vil utføres automatisk når LAN-kabelen er koblet til. 4. Velg ønsket inngangspunkt med ●● og trykk OK for å gå inn.
7. Velg Avslutt med ●● / og trykk OK for å stille inn. For å angi manuelt Nettverk > Nettverksinnstillinger > Manuell - Trådløst ■■Auto - Kablet 1. Vis menyen med MENU. 2. Velg Nettverk > Nettverkstilkobling med 3. Velg Auto med / / og trykk OK for å gå inn. og trykk OK for å få tilgang. 4. Automatisk oppsett utføres og Nettverksstatus vises. Nettverk > Nettverksinnstillinger > Nettverksstatus 5. Velg Avslutt med ●● / og trykk OK for å stille inn.
Manuell - Trådløst Forsikre deg om at alle tilkoblinger er i orden før du starter nettverksoppsett. Nettverk > Nettverksforbindelser 1. Vis menyen med MENU. 2. Velg Nettverk > Nettverkstilkobling > Manuell > Trådløst med og trykk OK for å åpne. ●● / Bekreft krypteringsnøkkelinnstillingene og posisjonen for tilgangspunktet før du starter oppsett. For mer informasjon, les håndboken for tilgangspunktet. 3. Velg ønsket inngangspunkt med ●● / / og trykk OK for å gå inn.
4. Tast inn krypteringskoden for tilgangspunktet med på OK for å stille inn. ●● Du kan stille inn tegn ved å bruke Tallknappene. ●● Trykk på BACK/RETURN for å lagre. / / / og trykk 5. IP/DNS-innstillinger vises. Hent IP-adresse / Hent DNS-adresse ●● Auto anbefales. ●● De tilgjengelige innstillingene vises automatisk. ●● For å stille inn manuelt, velg og still inn IP-adresse / Nettverksmaske / Standard-gateway / DNS-adresse.
6. Velg Nettverksstatus med / og trykk OK for å få tilgang. Nettverk > Nettverksinnstillinger > Nettverksstatus 7. Velg Avslutt med / og trykk OK for å stille inn. Manuell - Kablet Forsikre deg om at alle tilkoblinger er i orden før du starter nettverksoppsett. Nettverk > Nettverksforbindelser 1. Vis menyen med MENU. 2. Velg Nettverk > Nettverkstilkobling > Manuell > Kablet med og trykk OK for å åpne. / / / 3. IP/DNS-innstillinger vises. Hent IP-adresse / Hent DNS-adresse ●● Auto anbefales.
Proxy-port: Dette nummeret er også spesifisert av leverandøren med proxyadressen. 1) Velg Proxy-port med / . 2) Skriv inn nummeret med Tallknappene. 3) Trykk på BACK/RETURN for å lagre. 4. Velg Nettverksstatus med / og trykk OK for å få tilgang. Nettverk > Nettverksinnstillinger > Nettverksstatus 5. Velg Avslutt med / og trykk OK for å stille inn. Manuell - Trådløs ruter Du kan bruke TV-en som et trådløst tilgangspunkt og koble til nettverksutstyret uten et tilgangspunkt.
■■Endre Du kan installere Nettverksnavn(SSID), Krypteringsnøkkel, Type trådløs og Kanal innstillingsmetode manuelt. Følg instruksjonene på skjermen og foreta innstillingene manuelt. ●● Still Tilbakestill innstillinger for å tilbakestille elementene til Endre. = Merk = ●● Du kan ikke koble til Internett-tjenesten mens TV-en er stilt til Trådløs ruter. ●● Du kan koble til opp til 7 enheter. Men overføringshastigheten vil variere i henhold til kommunikasjonsmiljø eller tilkoblet utstyr.
My Home Cloud-innst. Stiller inn en konto for å bruke nettskybaserte tjenester. 1. Vis menyen med MENU. 2. Velg Nettverk > My Home Cloud-innst. med inn. 3. Velg ett av følgende elementer med / / og trykk OK for å gå og trykk OK for å gå inn. 4. Følg instruksjonene på skjermen. Konfigurer ny konto Opprette en konto for denne TV-en. Rediger konto Viser og redigerer konto-status. Fjern konto Sletter en konto fra denne TV-en. Merknader Viser tjenestebetingelser.
App-innst. for TV Remote Angir styring av TV-en med utstyret (smarttelefon osv.) som er koblet til nettverket. 1. Vis menyen med MENU. 2. Velg Nettverk > App-innst. for TV Remote med inn. 3. Velg ett av følgende elementer med / / og trykk OK for å gå og trykk OK for å gå inn. TV Remote (På / Av) Gjør det mulig å kontrollere TV-en fra nettverksutstyr (smarttelefon, osv.). Enhet for opplastet innh. Velger enhet for å laste opp innhold fra nettverksutstyr (smarttelefon, osv.).
Innst. for nettv.lenke Gjør det mulig å betjene TV-en med enhetene som er koblet til nettverket. 1. Vis menyen med MENU. 2. Velg Nettverk > Innst. for nettv.lenke med 3. Velg ett av følgende elementer med / / og trykk OK for å gå inn. og trykk OK for å gå inn. DLNA Server / Registreringsvalg / Fjernkontroll modellliste 4. Still inn med / / / og trykk på OK for å lagre. DLNA Server (På / Av) Lar deg dele innhold på denne TV-en med nettverksutstyr (DLNA Certified VIERA osv.).
= Merk = ●● Avhengig av området kan det hende at denne funksjonen ikke er tilgjengelig. For mer informasjon, forhør deg med din lokale Panasonicforhandler. Innstilling for fildeling Liste over nettverksenheter Viser nettverksenheter tilgjengelig for å spille av innholdet i Media Player. Media Player > Bruke Media Player > Nettverksenhet Programvareoppdatering Åpner det spesifikke nettstedet for oppdatering av TV-programvare hvis det er tilgjengelige programvareoppdateringer. 1. Vis menyen med MENU. 2.
Bilder Velge filen Forsikre deg om at klargjøringen av mediaserveren, nettverksforbindelsene og nettverksinnstillingene er fullført. Nettverk > DLNA > Informasjon Nettverk > Nettverksforbindelser Nettverk > Nettverksinnstillinger 1. Vis APPS-liste med APPS. 2. Velg Mediaserver med / / / og trykk OK for å få tilgang. 3. Velg en av mediaserverne med / og trykk OK for å gå inn. ●● For handlinger for å få tilgang til en annen TV må du velge navnet til den andre TV-en fra den viste mediaserverlisten.
Se bilde ■■Avspilling ●● Bruke Vis bilde : Til forrige bilde : Til neste bilde : Stopp (gå tilbake til liste) OK : Slide-show ●● Vise eller skjule funksjonsveiledningen ●● Rotere 90° (blå) ●● Gå tilbake til liste BACK/RETURN - 125 -
Bruke slideshow Slideshow avsluttes når alle bildene i listen har blitt sett. 1. Velg filen fra miniatyrbildet av bildene, som skal vises først med / . 2. Start slideshow med / / (rød) og OK. ●● Vise eller skjule funksjonsveiledningen ●● Stoppe (tilbake til Vis bilde) OK ●● Gå tilbake til liste BACK/RETURN ■■Slide-showinnstillinger Sette opp innstillingene for bildefiloperasjoner på denne TV-en. 1. Vis alternativmenyen med OPTION. 2. Velg Slide-showinnstillinger med / 3.
Auto Makeup (På / Av) Finner ansiktet i et bilde automatisk og gir bedre luminans og kontrast. Intervall (Lang / Normal / Kort) Velger slideshow-intervall. ●● Ikke gyldig når Overgangseffekt er stilt til Bevegelse Repetisjon (På / Av) Slideshow-repetisjon Bakgrunnsmusikk (Av / Type1 / Type2 / Type3 / Type4 / Type5) Velger bakgrunnsmusikk for bildemodus.
Video Velge filen Forsikre deg om at klargjøringen av mediaserveren, nettverksforbindelsene og nettverksinnstillingene er fullført. Nettverk > DLNA > Informasjon Nettverk > Nettverksforbindelser Nettverk > Nettverksinnstillinger 1. Vis APPS-liste med APPS. 2. Velg Mediaserver med / / / og trykk OK for å få tilgang. 3. Velg en av mediaserverne med / og trykk OK for å gå inn. ●● For handlinger for å få tilgang til en annen TV må du velge navnet til den andre TV-en fra den viste mediaserverlisten.
Se video ■■Avspilling Hvis du stoppet den siste avspillingen halvveis, spør bekreftelsesskjermen deg om du ønsker å starte fra den siste stoppede delen eller begynne fra begynnelsen. ●● Bruke avspilling : Hoppe over man. (hvis tilgjengelig) – Trykk for å hoppe frem omtrent 30 sekunder. : Spol tilbake : Spole frem : Stopp OK : Pause (viser tidssøkelinjen / langsom avspilling) / Avspilling. ●● Å hoppe til angitt tidspunkt 1) Vis tidssøkelinjen med OK. 2) Mens tidssøkelinjen vises Trykk / : Søk ca.
●● Endre sideforhold 1) Vis Valg av bildeformat med ASPECT. 2) Velg modus med / og trykk OK for å stille inn. Bildesideforhold1: Viser innholdet forstørret uten forvrengning. Bildesideforhold2: Viser innhold i fullskjermbilde. Original: Viser innholdets originale størrelse. – Du kan også endre modus ved å trykke ASPECT. (Trykk gjentatt inntil du kommer frem til den ønskede modusen.) – Bildeformat kan ikke endres, avhengig av innholdet.
Videokonfigurasjon Sette opp innstillingene for videofiloperasjoner på denne TV-en. 1. Vis alternativmenyen med OPTION. 2. Velg Videokonfigurasjon med / og trykk OK for å få tilgang. 3. Velg ett av følgende elementer med / og trykk OK for å gå inn. Videoforhåndsvisning / Multilyd / Dobbel lyd / Dobbel monolyd / Undertekst / Undertekst / Språk undertekster / Repetisjon ●● Menypunkter og valgalternativer varierer med innholdet. 4. Still inn med / / / og trykk på OK for å lagre.
Repetisjon (På / Av) Avspillingen gjentas innenfor den valgte filen Innstillinger for lydutgang Du kan nyte multi-kanallyden via en forsterker tilkoblet DIGITAL AUDIO eller HDMI2 (ARC-funksjon). ●● Å bekrefte eller endre nåværende lydstatus Nettverk > Video > Videokonfigurasjon 1. Vis menyen med MENU. 2. Velg Lyd > SPDIF-valg med 3. Velg Auto / PCM med / / og trykk OK for å gå inn. og trykk OK for å stille inn.
Musikk Velge filen Forsikre deg om at klargjøringen av mediaserveren, nettverksforbindelsene og nettverksinnstillingene er fullført. Nettverk > DLNA > Informasjon Nettverk > Nettverksforbindelser Nettverk > Nettverksinnstillinger 1. Vis APPS-liste med APPS. 2. Velg Mediaserver med / / / og trykk OK for å få tilgang. 3. Velg en av mediaserverne med / og trykk OK for å gå inn. ●● For handlinger for å få tilgang til en annen TV må du velge navnet til den andre TV-en fra den viste mediaserverlisten.
Spille av musikk ■■Avspilling ●● Bruke avspilling : Spol tilbake : Spole frem : Stopp OK : Pause (viser tidssøkelinjen) / Avspilling. ●● Å hoppe til angitt tidspunkt 1) Vis tidssøkelinjen med OK. 2) Mens tidssøkelinjen vises Trykk / : Søk ca. 10 sekunder Trykk og hold / : Hurtigsøk 3) Hopp til angitt tidspunkt med OK.
Musikkinnstillinger Sette opp innstillingene for musikkfiloperasjoner på denne TV-en. 1. Vis alternativmenyen med OPTION. 2. Velg Musikkinnstillinger > Repetisjon med OK. 3. Velg Mappe / En / Av med / og trykk OK for å stille inn.
DIGA-opptaker Kontrollere DIGA-opptaker Forsikre deg om at klargjøringen av mediaserveren, nettverksforbindelsene og nettverksinnstillingene er fullført. Nettverk > DLNA > Informasjon Nettverk > Nettverksforbindelser Nettverk > Nettverksinnstillinger 1. Vis APPS-liste med APPS. 2. Velg Mediaserver med 3. Velg DIGA med / / / / og trykk OK for å få tilgang. og trykk OK for å få tilgang. 4. Skjermbildet for DIGA-opptakeren vises.
Teknisk informasjon Fotoformat ■■Støttede fotoformater ●● JPEG (.jpg, .jpeg) Sub-sampling: 4:4:4, 4:2:2, 4:2:0 Bildeoppløsning (piksel): 8 × 8 til 30 719 × 17 279 ●● DCF- og EXIF-standarder ●● Progressive JPEG er ikke støttet. = Merk = ●● Noen filer avspilles kanskje ikke, selv når de oppfyller disse betingelsene. ●● Ikke bruk multi-bytestegn eller andre spesialkoder for filnavn. ●● Tilkoblede enheter kan bli ubrukelig med dette TV-apparatet hvis fil- eller mappenavnene endres.
Videoformat ■■Støttede videoformater ●● AVI (.avi) Video-codec: H.264 BP/MP/HP, MPEG1, MPEG2, MPEG4 SP/ASP, VC-1, Windows Media Video Ver. 9 Lyd-codec: AAC, ADPCM, Dolby Digital, Dolby Digital Plus, DTS kjerne, HE-AAC, LPCM, MPEG Audio, MP3, WMA, WMA Pro ●● Noen undertekster eller kapittelfunksjoner kan være utilgjengelige. ●● MP4 (.f4v, .m4v, .mp4) Video-codec: H.
●● FLV (.flv) Video-codec: H.264 BP/MP/HP Lyd-codec: AAC, MP3 ●● 3GPP (.3gp, .3g2) Video-codec: H.264 BP/MP/HP, MPEG4 SP/ASP Lyd-codec: AAC, HE-AAC ●● PS (.mod, .mpg, .mpeg, .vob, .vro) Video-codec: MPEG1, MPEG2 Lyd-codec: Dolby Digital, LPCM, MPEG Audio ●● TS (.mts, .m2ts, .tp, .trp, .ts, .tts) Video-codec: H.
■■Støttede undertekstformater ●● MicroDVD, SubRip, TMPlayer (.srt, .sub, .txt) ●● Videofilen og undertekstfilen ligger i samme mappe, og de har samme filnavn bortsett fra filtypen. ●● Hvis det er flere enn én tekstingsfil i samme mappe, vises de i følgende rekkefølge: “.srt”, “.sub”, “.txt”. = Merk = ●● Noen filer avspilles kanskje ikke, selv når de oppfyller disse betingelsene. ●● Ikke bruk multi-bytestegn eller andre spesialkoder for filnavn.
Musikkformat ■■Støttede musikkformater ●● MP3 (.mp3) ●● AAC (.m4a) ●● Kopibeskyttede filer kan ikke spilles av. ●● FLAC (.flac) ●● WMA / WMA Pro (.wma) ●● Kopibeskyttede filer kan ikke spilles av. ●● WMA Lossless støttes ikke. ●● LPCM (.wav) = Merk = ●● Noen filer avspilles kanskje ikke, selv når de oppfyller disse betingelsene. ●● Ikke bruk multi-bytestegn eller andre spesialkoder for filnavn. ●● Tilkoblede enheter kan bli ubrukelig med dette TV-apparatet hvis fil- eller mappenavnene endres.
Funksjoner VIERA Link “HDAVI Control™” Oppsummering av VIERA Link Nyt ekstra HDMI-interoperabilitet med Panasonic-produkter som har “HDAVI Control™”-funksjonen. VIERA Link (HDAVI Control) kobler sammen TV-en og utstyret med VIERA Link-funksjon, og muliggjør enkel kontroll, avspilling, energisparing, opprettelse av hjemmekino osv., uten kompliserte innstillinger. Tilkoblinger til utstyret (DIGA-opptaker, HD- videokamera, Spillanlegg, Forsterker, osv.
■■VIERA Link (HDMI-tilkobling) ●● Bruk en fullkablet, HDMI-kompatibel kabel. ●● Koble utstyret som støtter VIERA Link til TV-ens HDMI-terminaler ved hjelp av en HDMI-kabel. Med hensyn til HDMI-kabel for tilkobling av HD Panasonic videokamera eller LUMIX kamera, må du lese bruksanvisningen til dette utstyret.
■■VIERA Link (Tilkoblinger for HDMI og Lyd ut) ●● Bruk en fullkablet, HDMI-kompatibel kabel. ●● Koble utstyret som støtter VIERA Link til TV-ens HDMI-terminaler ved hjelp av en HDMI-kabel. ●● Bruk en fullkablet SCART-kabel. ●● Bruk den optiske digitallyd-kabel eller SCART-kabeln for lydsignal fra TVen.
■■Tilgjengelige funksjoner (Tilkoblinger for HDMI og Lyd ut) Spillanlegg ●● Enkel avspilling ●● Link strøm på ●● Link strøm av ●● Smart auto hvilemodus ●● VIERA Link Control ●● Høyttaler-valg Blu-ray diskkonsoll ●● Enkel avspilling ●● Link strøm på ●● Link strøm av ●● Strømsparing hvilemodus ●● Smart auto hvilemodus ●● VIERA Link Control ●● Høyttaler-valg Forsterker ●● Link strøm av ●● Smart auto hvilemodus ●● Høyttaler-valg : For utstyr som har funksjonen “HDAVI Control 2” el
■■VIERA Link Control av kompatibelt utstyr Det følgende er største antall kompatible enheter som kan kontrolleres av VIERA Link Control. Dette omfatter tilkoblinger til utstyr som allerede er koblet til TV-apparatet. For eksempel en DIGA-opptaker som er koblet til en forsterker som er koblet til TV-apparatet med en HDMI-kabel. Funksjoner > VIERA Link “HDAVI Control™” > VIERA Link Control ●● Opptaker: Maksimum 3 (DIGA-opptaker, osv.
Enkel avspilling Automatisk veksling av kilde – Når det tilkoblede utstyret brukes, skiftes inngangsmodusen automatisk. Link strøm på Still Link strøm på til På i oppsettmenyen for å bruke denne funksjonen. Når det tilkoblete utstyret starter avspilling, eller når direkte navigator / funksjonsmeny til utstyret aktiveres, slås TV-en automatisk på. (Kun når TVen er i hvilemodus.) Link strøm av Still Link strøm av til På i oppsettmenyen for å bruke denne funksjonen.
VIERA Link Control Du kan styre noen av funksjonene til det tilkoblete utstyret med fjernkontrollen til denne TV-en ved å rette fjernkontrollen mot TV-ens signalmottaker. 1. Vis APPS-liste med APPS. 2. Velg VIERA Link med / / / og trykk OK for å få tilgang. 3. Velg VIERA Link Control med / og trykk OK for å få tilgang. 4. Velg ett av følgende elementer med / og trykk OK for å gå inn.
= Merk = ●● Hvis du ikke kan bruke utstyret må du kontrollere innstillingene og utstyret. Funksjoner > VIERA Link “HDAVI Control™” > Oppsummering av VIERA Link ●● Noen funksjoner er muligens ikke tilgjengelig, avhengig av utstyret. I dette tilfellet skal du bruke fjernkontrollen til det tilkoblete utstyret. ●● For detaljer vedrørende virkemåtene til tilkoblete utstyret, må du lese bruksanvisningen til utstyret.
Merk ●● Disse funksjonene vil muligens ikke fungere ordentlig, avhengig av det tilkoblede utstyret. ●● Bilde eller lyd vil muligens ikke leveres i de første sekundene etter at en har skiftet inngangsmodus. ●● “HDAVI Control 5” er den nyeste standarden for utstyr som er kompatibelt med HDAVI Control. Denne standarden er kompatibel med konvensjonelt HDAVI-utstyr.
Barnelås Bruke barnesikring Du kan låse spesifikke kanaler / AV-inngangsterminaler for å kontrollere tilgangen til dem. Når den låste kanalen / inntaket er valgt, vises en melding. Skriv inn PIN-koden for å se. 1. Vis menyen med MENU. 2. Velg Oppsett > Barnelås med / og trykk OK for å gå inn. 3. Oppgi PIN-koden (4 siffer) med Tallknappene. ●● Oppgi PIN-koden to ganger ved første innstilling. ●● Noter deg PIN-nummeret i tilfelle du skulle glemme det.
PIN-kode Du kan endre PIN-kode 1. Velg Endre PIN med / og trykk OK for å få tilgang. 2. Skriv inn en ny PIN-kode med Tallknappene. = Merk = ●● Innstilling Fabrikkinnstilling sletter PIN-kode og alle innstillinger. Foreldre kontroll Hvis DVB-programmet inneholder informasjon som er beregnet på en alder over den valgte, må du taste inn PIN-nummeret for å kunne se (avhengig av kringkastingsselskap). 1. Velg Foreldre kontroll med / og trykk OK for å få tilgang. 2.
Data Service Applikasjon Bruke data service application Du kan glede deg over Hybrid Broadcast Broadband TV, som er en av de interaktive tjenestene for digital kringkasting. 1. Vis TV-valg med TV. 2. Velg modus med / og trykk OK for å stille inn. DVB-C / DVB-T 3. Vis menyen med MENU. 4. Velg Oppsett > Data Service Applikasjon > Service med OK for å gå inn. 5. Velg Auto Start På med / / og trykk og trykk OK for å stille inn. ●● En melding vil vises når tjenesten er tilgjengelig.
Merk ●● For å bruke Hybrid Broadcast Broadband TV-tjenester fult, trenger du et bredbåndsnettverk. Forsikre deg om at nettverksforbindelsene og nettverksinnstillingene er fullført. Nettverk > Nettverksforbindelser Nettverk > Nettverksinnstillinger ●● Det er ikke sikkert at alle datatjenestene er tilgjengelige. Dette avhenger av land, område og kringkaster. ●● Avhengig av forbindelsesforholdene kan Internett-forbindelsen være treg eller mislykket. ●● Funksjoner kan variere avhengig av kringkasteren.
Felles grensesnitt Forsiktig Hvis den krypterte meldingen vises på skjermen, er ikke riktig modul for felles grensesnitt (CI) og smartkort, som er nødvendig for denne tjenesten, satt inn. ■■Slik setter du inn CI-modul og smartkort ●● Skru av TV-en med Strømbryter På/Av når du setter inn eller fjerner CImodulen. ●● Hvis et smartkort og en CI-modul kommer som en pakke, må du først sette inn CI-modulen og deretter sette smartkortet i CI-modulen.
Bruke vanlig grensesnitt Menyen for Felles grensesnitt-modul gir tilgang til programvare som er lagret på Felles grensesnitt-moduler (CI). ●● Denne funksjonen er muligens ikke tilgjengelig i enkelte land eller regioner. ●● Det er ikke sikkert at video- og lydsignaler sendes ut. Dette avhenger av sending eller tjenester. Selv om CI-modulen kan sette deg i stand til å vise enkelte tjenester, garanterer ikke denne TV-en alle tjenester (f.eks.kryptert betal-TV-kanaler).
Fabrikkinnstilling Fabrikkinnstilling Tilbakestiller TV-en til dens originale tilstand, (at ingen kanaler er innstilt). Alle innstillinger tilbakestilles (kanaler, bilde, lydinnstillinger, osv.). 1. Vis menyen med MENU. 2. Velg Oppsett > Systemmeny > Fabrikkinnstilling med for å gå inn. ●● / og trykk OK PIN-kode for barnelås er påkrevd, avhengig av land. Hvis du har glemt tilpasset PIN kan du bruke “6969” som PIN-nummer. Funksjoner > Barnelås > PIN-kode 3.
Å oppdatere TV-programvaren Informasjon Det kan være gitt ut en ny versjon av programvaren. Denne kan lastes ned for å øke ytelsen eller bedre funksjonene til TVen. Hvis en oppdatering er tilgjengelig, vil en melding vises når kanalen har informasjon om oppdateringen. ●● For å installere ny programvare velg Standby / Nå med OK for å angi. / og trykk på Standby: Installerer ny programvare i standby. Nå: Installerer ny programvare nå. Automatisk oppdatering Du kan oppdatere ny programvare automatisk. 1.
= Merk = ●● Nedlastingen kan ta noen timer. ●● Under nedlasting av programvare og oppdatering, må du IKKE slå av TVen. ●● Meldingen kan være en påminnelse. I så tilfelle vil informasjon om tidsplan (datoen den nye versjonen kan brukes fra) vises. Du kan da bestille oppdatering. Oppdateringen starter ikke når TV-en er slått Av. Manuell oppdatering Du kan oppdatere ny programvare manuelt. 1. Vis menyen med MENU. 2.
Stille inn tegn Bruke tallknapper Du kan taste inn tegn ved å bruke Tallknappene. Trykk på Tallknappene flere ganger til du når ønsket tegn. :.@/1!:#+-*_()“‘%&?,;=$[]~<>{}|`^\ :abc2ABCåæÅÆ :def3DEF :ghi4GHI :jkl5JKL :mno6MNOøØ :pqrs7PQRS :tuv8TUV :wxyz9WXYZ : Mellomrom 0 ●● Tegnet stilles inn automatisk hvis det oppstår en pause på 1 sekund. ●● Du kan også stille inn tegn ved å trykke på OK eller andre Tallknappene i mindre enn 1 sekund. ●● Tegnene kan variere avhengig av tilkoblet utstyr.
Tastatur Tastatur ●● Tastaturer som krever drivere støttes ikke. ●● For å endre språktype, still USB-tastaturoppsett. 1) Vis menyen med MENU. 2) Velg Oppsett > Systemmeny > USB-tastaturoppsett med trykk OK for å gå inn. 3) Velg språket med / / og og trykk OK for å stille inn. ●● Det er mulig at tegn ikke vises riktig på TV-skjermen, avhengig av det tilkoblede tastaturet eller tastaturets layoutinnstilling. ●● Noen av tastene på tastaturet kan samsvare med bruken av fjernkontrollen.
Innstillinger Innstillingsmeny Hvordan bruke Forskjellige menyer setter deg i stand til å utføre innstillinger for bildet, lyden og andre funksjoner. 1. Vis menyen med MENU. ●● Viste elementer varierer avhengig av inngangssignalet. 2. Velg meny med / 3. Velg elementene med og trykk OK for å gå inn. / og trykk OK for å gå inn. ●● Kun tilgjengelige elementer kan velges. ●● Du kan også gå inn fra eHELP ved å trykke på punkt (hvis tilgjengelig).
●● Å endre menysider ●● For å endre fargetypen av visninger på skjermen, still inn Meny fargevalg. Min startskjerm > Min startskjerm > Meny fargevalg = Merk = ●● Menyelementer og valgbare alternativer varierer avhengig av modus (TVmodus, Media Player, Nettverkstjenester, etc.). ■■Bruke kontrollpanelknapper 1. Trykk og hold inne INPUT/OK/HOLD for MENU-knappen i 3 sekunder for å vise menyen. 2. Velg og still inn med følgende kontrollpanelknapper.
Bilde Bildemodus Velger din favorittbildemodus for hver inngang. (Dynamisk / Normal / Cinema / Ekte kino-modus / Tilpasset) Se > For beste bilde > Bildemodus Grunninnstillinger Bakgrunnslys, Kontrast, Lysstyrke, Farge, Fargebalanse, Skarphet Justerer nivåene til disse valgmulighetene, i samsvar med din personlige preferanse. Se > For beste bilde > Grunninnstillinger Fargetemperatur (Kjølig2 / Kjølig1 / Normal / Varm1 / Varm2) Stiller inn den generelle fargetonen i bildet (mer blått - mer rødt).
Støyreduksjonsinnstillinger Bilde støyreduksjon (Auto / Maksimum / Middels / Minimum / Av) Reduserer uønsket bildestøy. Se > For beste bilde > Støyreduksjonsinnstillinger ●● Ikke gyldig når 1080p Uskalert er satt til På for 39/42/50-tommers modell MPEG Støyreduksjon (Auto / Maksimum / Middels / Minimum / Av) Reduserer flimring i konturene i et bilde og blokkerer støy.
Tilleggsinnstillinger Film kildemodus (På / Av) Forbedrer vertikal oppløsning for filmbilder. Se > For beste bilde > Tilleggsinnstillinger ●● Denne funksjonen er tilgjengelig for sammenflettede signaler (unntatt nettverkstjenester). 1080p Uskalert For 39/42/50-tommers modell (På / Av) Reproduserer den originale bildekvaliteten i detalj for 1080 p (HDMI)inngangssignal.
3D-COMB (På / Av) Gjør rolige og saktegående filmer mer livlige. Se > For beste bilde > Tilleggsinnstillinger ●● For PAL / NTSC-signal mottak i TV-modus eller fra sammensatt modus Skjerminnstillinger 16:9 overscan (På / Av) Velger skjermområdet som viser bildet i forholdet 16:9. Se > For beste bilde > Skjerminnstillinger ●● Ikke gyldig i nettverkstjenester Horisontal størrelse (H-Størrelse1 / H-Størrelse2) Bytter det horisontale visningsområdet for å redusere støy på siden av bildet.
Lyd Lydmodus Velger din favorittlydmodus for hver inngang. (Standard / Musikk / Tale / Bruker) Se > For beste lyd > Lydmodus Grunninnstillinger Bass Justerer nivået for å forsterke eller minimalisere lavere, dypere lydutgang. Se > For beste lyd > Grunninnstillinger Diskant Justerer nivået for å forsterke eller minimalisere skarpere, høyere lydutgang. Se > For beste lyd > Grunninnstillinger Equalizer Justerer frekvensnivået slik at du får din favorittlydkvalitet.
Voluminnstillinger Høyttalerinnstilling (TV-høyttalere / Hodetelefoner / Av) Velger TV-høyttalere eller hodetelefoner for lydutgang. Settes til Av ved bruk av eksterne høyttalere. Se > For beste lyd > Voluminnstillinger Hodetelefon vol. Justerer volumet til hodetelefonene. Se > For beste lyd > Voluminnstillinger Auto-volumregulering (På / Av) Regulerer store forskjeller i lydnivå automatisk mellom kanaler og inngangssignaler.
Stemmeveiledning Stemmeveiledning (På / Av) Still til På for å aktivere talestyring av de grunnleggende funksjonene (menyelement, skjermeldinger, osv.) for brukere med nedsatt syn. Se > For beste lyd > Stemmeveiledning Hastighet (Rask / Normal / Sakte) Velger avlesningshastighet for taleveiledning. Se > For beste lyd > Stemmeveiledning Lydstyrke (Maksimum / Middels / Minimum) Velger volumet for taleveiledning. Se > For beste lyd > Stemmeveiledning Språk Endrer språk for taleveiledningen.
Lydbeskrivelse Foretrukket lydmodus (Standard / Lydbeskrivelse) Innstillinger for lydkommentarer for brukere med svekket syn Se > For beste lyd > Lydbeskrivelse ●● For DVB Lydstyrke Justerer volumet på audio-beskrivelse. Se > For beste lyd > Lydbeskrivelse ●● For DVB Høyttalere (Miks / Standard) Still inn Miks for å aktivere lydsporet for audio-beskrivelse fra tv-høyttalere.
Avanserte innstillinger MPX Velger multipleks lydmodus (hvis tilgjengelig). Se > For beste lyd > Avanserte innstillinger ●● For analog Lydpreferanse (Auto / Flerkanal / Stereo / MPEG) Velger de første settingene for lydspor. Se > For beste lyd > Avanserte innstillinger ●● For DVB SPDIF-valg (Auto / PCM) Velger grunninnstilling for digitalt lydsignal fra DIGITAL AUDIO og HDMI2 (ARC-funksjon).
Nettverk Nettverkstilkobling Stiller inn nettverksinnstillinger for denne TV-en for bruk i ditt nettverksmiljø. Nettverk > Nettverksinnstillinger > Nettverkstilkobling Nettverksstatus Viser og kontrollerer nettverksstatus (MAC-adresse, gjeldende nettverksinnstillinger, osv.). Nettverk > Nettverksinnstillinger > Nettverksstatus My Home Cloud-innst. Stiller inn en konto for å bruke nettskybaserte tjenester. Nettverk > Nettverksinnstillinger > My Home Cloud-innst.
Andre innstillinger Programvareoppdatering Sjekker etter tilgjengelige programvareoppdateringer fra Panasonics nettsted. Nettverk > Nettverksinnstillinger > Programvareoppdatering Ny programvare-melding (På / Av) Velger om melding skal gis når en ny programvare er funnet via nettverk eller ikke.
Timer Av timer Stiller inn tidslengde til TV-en automatisk går i hvilemodus. (90 / 75 / 60 / 45 / 30 / 15 / Av (minutter)) Se > Grunnleggende > Av timer Tidssone Justerer tidsdata. Se > Grunnleggende > Stille inn tid Automatisk standby Stiller TV-en automatisk til hvilemodus for energisparing når den ikke brukes på 4 timer.
Oppsett Eco Navigation Setter automatisk TV-apparatet til den mest passende energisparingsmodus. Se > Grunnleggende > Energibesparende funksjoner Oppsett USB-enhet Trygg fjerning av USB-enhet. Media Player > Bruke Media Player > Informasjon Barnelås Legger til inngangskontroll for kanaler eller signaler for å forhindre uønsket tilgang. Funksjoner > Barnelås > Bruke barnesikring Søkemeny Favorittredigering Lager en liste over favorittkanaler.
Favorit nettverk Velger ditt favorittnettverk for hver av kringkastingsselskapene (kun tilgjengelig i enkelte land). Se > Innstilling og redigering av kanaler > Andre innstillinger ●● For DVB-C, DVB-T Ny kanalmelding (På / Av) Velger om en skal gi en varslingsmelding når en ny kanal er oppdaget. Se > Innstilling og redigering av kanaler > Ny kanalmelding ●● For DVB Erstatningskanal (På / Av) Sett til På for å aktivere en melding om å skifte til tilgjengelig tjeneste (tilgjengelig bare i enkelte land).
Språk OSD-språk Endrer skjermspråk. Se > Grunnleggende > Språk Ønsket lydspråk 1 / 2 Velger det første og andre språket som foretrekkes for DVB-multilyd (avhengig av kringkaster). Se > Grunnleggende > Språk Ønskede undertekster 1 / 2 Velger det første og andre språket som foretrekkes for DVB-undertekster (avhengig av kringkaster). Se > Grunnleggende > Språk Ønsket tekst-tv Velger det ønskete språket for DVB-tekst-TV-tjenester (avhengig av kringkastingsselskap).
Skjerminnstillinger Meny fargevalg (Kullsvart / Blek grå / Organisk brun / Sandbeige) Velg den foretrukne fargetypen til visninger på skjermen. Min startskjerm > Min startskjerm > Meny fargevalg Ønsket type undertekster (Standard / For hørselshemmede) Ønsket type undertekster. Se > Grunnleggende > Undertekst Tekst-TV (TOP (FLOF) / Liste) Velger tekst-TV-modus. Se > Tekst-TV > Tekst-TV-modus Tekst tv bokstaver (Vest / Øst1 / Øst2) Velger språkskrifttype for tekst-TV.
Tidsavbr indikasjon (10 / 9 / 8 / 7 / 6 / 5 / 4 / 3 / 2 / 1 / intet display (sekunder)) Stiller inn hvor lenge informasjonsfeltet blir på skjermen. Se > Grunnleggende > Informasjonsfelt Smart Banner (På / Av) Viser introduksjonsbanneret for Internett-tjenesten. Se > Grunnleggende > Informasjonsfelt Radiomodus (20 / 15 / 10 / 5 / Av (sekunder)) Stiller inn timer for å slå av skjermen automatisk når en radiokanal velges.
VIERA Link innstillinger VIERA Link (På / Av) Stiller inn for å bruke VIERA Link-funksjoner. Funksjoner > VIERA Link “HDAVI Control™” > Forberedelser Link strøm på (På / Av) Stiller inn for å bruke funksjonen Link strøm på. Funksjoner > VIERA Link “HDAVI Control™” > Link strøm på Link strøm av (På / Av) Stiller inn for å bruke funksjonen Link strøm av.
Data Service Applikasjon Service (Auto Start På / Auto Start Av / Av) Stiller inn for bruk av Hybrid Broadcast Broadband TV-applikasjon. ●● Det er ikke sikkert at alle datatjenestene er tilgjengelige. Dette avhenger av land, område og kringkaster. Funksjoner > Data Service Applikasjon > Bruke data service application ●● For DVB lagre informasjonskapsler (På / Av) Stiller inn til å lagre informasjonen fra en datatjeneste til TV-en for å få rask tilgang igjen.
Andre innstillinger GUIDE Plus+ innstillinger Innstillinger for GUIDE Plus+-systemet Se > TV Guide > Bruke TV Guide Strømsparer (På / Av) Reduserer lysstyrken i bildet for å økonomisere med strømforbruket.
Støtte Ofte stilte spørsmål Bilde Følg disse enkle rettledningene for å løse problemet, før du ber om service eller assistanse. Hvis problemet fremdeles ikke lar seg løse, må du kontakte din lokale Panasonic-forhandler for assistanse. Autobildeformat ●● Autobildeformat er konstruert for å kunne gi deg det beste bildeforholdet slik at skjermen fylles. Se > For beste bilde > Aspekt-styresignal ●● Trykk på ASPECT hvis du vil endre bildeforholdet manuelt.
Det vises ikke noe bilde ●● Sjekk at du har valgt den korrekte inngangsmodusen. ●● Kontroller innstillingen for AV2 (COMPONENT / VIDEO) i Inngangsvalg for å samsvare med utgangen til det eksterne utstyret. Se > Eksternt utstyr ●● Er Kontrast, Lysstyrke eller Farge i Bildemenyen satt til det minimale? Se > For beste bilde > Grunninnstillinger ●● Sjekk at alle påkrevde kabler og tilkoblinger sitter som de skal. Slørete eller forstyrret bilde (ingen lyd eller lavt volum) ●● Tilbakest. kanaler.
Digital-TV Følg disse enkle rettledningene for å løse problemet, før du ber om service eller assistanse. Hvis problemet fremdeles ikke lar seg løse, må du kontakte din lokale Panasonic-forhandler for assistanse. Blokkerte bilder med støy, som fryser eller forsvinner oppstår / noen kanaler kan ikke stilles inn ●● Kontroller posisjonen, retningen og tilkoblingen til antennen. ●● Sjekk Signaltilstand. Hvis Signalkvalitet vises i rødt, er DVB-signalet svakt.
Analog TV Følg disse enkle rettledningene for å løse problemet, før du ber om service eller assistanse. Hvis problemet fremdeles ikke lar seg løse, må du kontakte din lokale Panasonic-forhandler for assistanse. Hvite flekker eller skyggebilder (ghosting) oppstår / noen kanaler kan ikke stilles inn ●● Kontroller posisjonen, retningen og tilkoblingen til antennen. ●● Værforholdene påvirker signalmottaket (tett regn, snø osv.), særlig i områder med dårlige mottaksforhold.
Lyd Følg disse enkle rettledningene for å løse problemet, før du ber om service eller assistanse. Hvis problemet fremdeles ikke lar seg løse, må du kontakte din lokale Panasonic-forhandler for assistanse. Det høres ingen lyd ●● Er “Lyd av” aktivert? Trykk MUTE for å slå “Lyd av” på eller av. ●● Er volumet satt til det laveste? ●● Kontroller koblingene og innstillingen på eksternt utstyr. Se > Eksternt utstyr ●● Se til at Høyttaler-valg er satt til TV.
HDMI Følg disse enkle rettledningene for å løse problemet, før du ber om service eller assistanse. Hvis problemet fremdeles ikke lar seg løse, må du kontakte din lokale Panasonic-forhandler for assistanse. Lyden er ikke slik den pleier ●● Sett lydinnstillingen til det tilkoblede utstyret til “2ch L.PCM”. ●● Sjekk HDMI inngang-innstillingen i Lydmenyen. Se > For beste lyd > Avanserte innstillinger ●● Hvis det er problemer med en digital lydtilkobling, kan du velge analog lydtilkobling.
Nettverk Følg disse enkle rettledningene for å løse problemet, før du ber om service eller assistanse. Hvis problemet fremdeles ikke lar seg løse, må du kontakte din lokale Panasonic-forhandler for assistanse. Kan ikke koble til nettverket ●● Undersøk om LAN-kabelen eller lokalnettet er riktig tilkoblet. Nettverk > Nettverksforbindelser ●● Kontroller tilkoblinger og innstillinger. Nettverk > Nettverksforbindelser Nettverk > Nettverksinnstillinger ●● Kontroller nettverksutstyret og nettverksmiljøet.
Kan ikke betjene Internett-innhold ●● Kontroller tilkoblinger og innstillinger. Nettverk > Nettverksforbindelser > Internett-tilkobling Nettverk > Nettverksinnstillinger ●● Serveren eller den tilkoblede linjen kan være opptatt nå. Annet Følg disse enkle rettledningene for å løse problemet, før du ber om service eller assistanse. Hvis problemet fremdeles ikke lar seg løse, må du kontakte din lokale Panasonic-forhandler for assistanse.
En feilmelding vises ●● Følg instruksjonene i meldingen. ●● Hvis problemet vedvarer, kan du kontakte en lokal Panasonic-forhandler eller et autorisert servicesenter. LCD-panelet beveger seg litt og en klaprende lyd høres når man trykker på det med en finger ●● Der er en liten avstand rundt panelet for å forhindre skade på panelet. Dette er ikke feil.
Vedlikehold Tilsyn og rengjøring Først må nettpluggen trekkes ut fra stikkontakten. ■■Skjermpanel, Kabinett, Understell Vanlig renhold: Tørk forsiktig over skjermpanelet, kabinettet og sokkelen med en myk klut for å fjerne skitt og fingermerker. Vanskelig smuss: (1) Tørk først støvet av overflaten. (2) Fukt en myk klut med rent vann eller et utvannet, nøytralt rengjøringsmiddel (1 del rengjøringsmiddel til 100 deler vann). (3) Vri opp kluten godt.
Informasjon Bruke hjelpemenyen 1. Vis menyen med MENU. 2. Velg Hjelp med / og trykk OK for å få tilgang. 3. Velg TV Selvdiagnostikk / Systeminformasjon / Enhetsinformasjon med / og trykk OK for å gå inn. TV Selvdiagnostikk Foretar en diagnose av bilde- eller lydproblemer. Følg instruksjonene på skjermen. Systeminformasjon Viser systeminformasjonen til denne TV-en. Enhetsinformasjon Viser enhetsinformasjonen til denne TV-en.
Ekstrautstyr Kommunikasjonskamera ■■Kommunikasjonskamera ●● TY-CC20W – Dette kameraet kan brukes i videokommunikasjonsverktøyet. Nettverk > Internett-innhold > Velge Internett-innhold – Avhengig av området, kan det hende at dette ekstrautstyret ikke er tilgjengelig. For mer informasjon, forhør deg med din lokale Panasonicforhandler. Konsoll for oppheng på vegg ■■Konsoll for oppheng på vegg ●● Kontakt din nærmeste Panasonic-forhandler for å kjøpe den anbefalte konsoll for oppheng på vegg.
Lisens Lisens Selv om selskaper eller produktmerker ikke er nevnt spesielt, er slike varemerker fullt ut respektert. DVB og DVB-logoen er varemerker for DVB Project. Skype er et varemerke for Skype Limited. DLNA®, DLNA-logoen og DLNA CERTIFIED™ er varemerker, tjenestemerker eller sertifiseringsmerker for Digital Living Network Alliance. Windows er et registrert varemerke for Microsoft Corporation i USA og i andre land. Mac er et registrert varemerke som tilhører Apple Inc.
GUIDE Plus+, Rovi og Rovi Guide er varemerker av Rovi Corporation og/eller dets datterselskaper. GUIDE Plus+ og Rovi Guide-systemer produseres under lisens fra Rovi Corporation og/eller dets datterselskaper. Rovi Guide-systemet er beskyttet av patenter og patentsøknader i USA, Europa og andre land, inkludert ett eller flere patenter i USA - 6 396 546; 5 940 073; 6 239 794 - utstedt til Rovi Corporation og/eller dets datterselskaper. “PlayReady” er et registrert varemerke som tilhører Microsoft.
Dette produktet inneholder følgende programvare: (1) programvare utviklet uavhengig av eller for Panasonic Corporation, (2) programvare eid av tredjepart og lisensiert til Panasonic Corporation, (3) programvare lisensiert under GNU LESSER GENERAL PUBLIC LICENSE versjon 2.1 (LGPL V2.1), (4) programvare som er lisensiert under GNU GENERAL PUBLIC LICENSE versjon 2 (GPL V2) og/eller, (5) programvare med åpen kildekode annen enn programvare lisensiert under LGPL V2.1 og GPL V2.
Ver.1.