Operation Manual

Energy saving functions
The TV can be eco-friendly using energy-saving functions.
The TV goes into Standby mode in the following conditions:
Eco Navigation is set to Set to Eco.
Off Timer is active.
Watching > Basic > Off Timer
No operation is performed for 4 hours while Auto Standby is set to On.
No signal is received and no operation is performed for 10 minutes while
No signal Power off is set to On.
Auto Standby
1. Display the menu with MENU.
2. Select Timer > Auto Standby and press OK to access.
3. Select On / Off and press OK to set.
Auto Standby
(On / Off)
Automatically turns the TV to Standby mode for energy saving when no
operation is performed for 4 hours.
Automatic input switching with the connected equipment affects this
function and time-count resets.
A notification message will appear 3 minutes before going into Standby
mode.
Changing the default configuration may result in higher energy
consumption of the product.
No signal Power off
1. Display the menu with MENU.
2. Select Timer > No signal Power off and press OK to access.
3. Select On / Off and press OK to set.
- 30 -