Operating instructions

8
4. Q-- Link connec ti on of TV, VCR and Satellite Receiv er using Scart and RF cables
For Q-- Link to function correctly the TV, VCR and Satellite Receiver must be connected as shown in the diagram below.
Scart Connections
“Fully wired” Scart cables should be used for all of the Scart connections.
D TheAV2ScartoftheVCRmustbeconnectedtotheVCRsocketoftheSatelliteReceiver.
D The TV Scart socket of the Satellite Receiver must be connected to the AV1 Scart socket of the TV.
Note :
If using a
“Q-- Link” VCR then the AV1 Scart of the VCR must be connected to the AV2 socket of the TV. If your VCR is not a “Q -- Link”
VCR, please consult your VCR operating instruction book.
RF Connections
D Connect an RF cable to the Aerial In socket of the Satellite Receiver.
D Connect an RF cable from the RF Out socket of the Satellite Receiver to the RF In socket of the VCR.
D Connect an RF cable from the RF Out socket of the VCR to the TV Aerial In sock et (
).
Mains
Socket
TV
SATELLITE
RECEIVER
VCR Scart
socket
TV Scart
socket
Aerial
Input
socket
Aerial
Output
socket
AV2
Scart socket
VCR
Mains
Socket
Mains
Socket
Aerial
Input
socket
Aerial
Output
socket
Aerial
Input
socket
AV1 Scart
socket
AV2 Scart
socket
AV1
Scart socket
Notes :
Additional equipment and cables are not supplied.
Further details of Audio/ Video connections can be found on pages 34 and 35.
Further information for VCR and Satellite Receiver installation with this TV can be found on page 30.
QUICK START GUIDE