Operating Instruction

19
English
Retuning from Setup
Menu
Automaticallyretunesthechannelsreceivedinthearea.
●
Thisfunctionisavailableifchanneltuningisalready
performed.
●
Onlytheselectedmodeisretuned.Alltheprevious
tuningsettingsareerased.
●
ChildLockPINnumberisrequiredtoretunelocked
channels.
1 Display the menu and select
[Settings]
select
access
2 Select [Antenna/cable installation]
select
access
3 Select the item and press OK to
access
select
access
Start the Installation
■ Update Channels
1Select[Updatechannels].
select
access
Youcanalwaysstartachannelupdatemanually,new
channelswillbeadded,andunavailablechannelswill
beremoved.
Automatically Search for Channels
1Select[Automaticchannelupdate].
●
Ifyoureceivedigitalchannels,youcansettheTVto
automaticallyupdatethelistwithnewchannels.
●
NewchannelsarestoredintheAllchannelslistand
Newchannelslist.Emptychannelsareremoved.
●
Ifnewchannelsarefoundorifchannelsareupdated
orremoved,amessageisshownatTVstartup.
TheTVmustbeinstandbytoautomaticallyupdate
channels.
Channel Update Messages
Whennewchannelsarefoundorifchannelsare
updatedorremoved,amessageisshownatTVstartup.
Toavoidthismessagetoappearaftereverychannel
update,youcanswitchitoff.
DVB-C, DVB-T, Analogue
Re-install Channels
1Select[Antenna/cableinstallation]>[Searchfor
channels].
2Select[Re-installchannels].
3SelectthecountryandpressOK.
4Select[Antenna(DVB-T)]or[Cable(DVB-C)],and
selectoneitemyouneedtore-install.
5Select[Digitalandanaloguechannels],[Onlydigital
channels],or[Onlyanaloguechannels].
6Select[Start]andpressOKtoupdatechannels.This
cantakeafewminutes..
Reception test
Thedigitalfrequencyisshownforthechannel.Ifthe
receptionispoor,checkandrepositionyourantenna.
Checkthesignalquality,select[Search].
IfyouuseDVB-Ctoreceivechannels,theoption
[Symbolratemode]isavailable.ForSymbolratemode,
select[Automatic],unlessyourcableprovidergave
youaspecificsymbolratevalue.Toenterthespecific
symbolratevalue,select[Symbolrate],andtypeinthe
value.
Manual Installation
ManuallyinstallanalogueTVchannelifneeded.
1Select[Antenna/cableinstallation]>[Analogue:
ManualInstallation].
■ System
SetuptheTVsystemandselectthecountry.
■ Search Channel
Enterafrequencytofindachannel.Thefound
channelisshownandifthereceptionispoor,press
[Search]again.Select[Done]andpressOKtostore
thechannel.
■ Fine tune
Select[Finetune]tofinetuneachannel.
■ Store
Youcanstorethechannelonthecurrentchannel
numberorasanewchannelnumber.
Select[Store]andpressOK.Thenewchannel
numberisshownbriefly.