Operating Instruction

8
English
3
B
Removing the pedestal
Be sure to remove the pedestal in the following
procedures when you use the wall-hanging bracket or
repack the TV.
1. Put the TV onto a work table with the screen panel
down on the clean and soft cloth.
2. Remove the assembly screws from the TV.
3. Pull out the pedestal from the TV.
4. Remove the assembly screws from the bracket.
Installing the wall-
hanging bracket
Please contact your local Panasonic dealer to purchase
the recommended wall-hanging bracket.
●
Holes for wall-hanging bracket installation
Rear of the TV
a
b
24-inch model
a: 100 mm
b: 200 mm
32-inch model
a: 100 mm
b: 100 mm
(View from the side)
L
24-inch 32-inch
Depth of
screw (L)
min. (mm)
8 8
max. (mm)
10 10
Diameter M4 M6
Screw for fixing the TV onto the wall-hanging
bracket (not supplied with the TV)
Warning
●
Using other wall-hanging brackets, or installing a wall-
hanging bracket by yourself have the risk of personal
injury and product damage. In order to maintain the
unit’s performance and safety, be absolutely sure to
ask your dealer or a licensed contractor to secure
the wall-hanging brackets. Any damage caused by
installing without a qualified installer will void your
warranty.
●
Carefully read the instructions accompanying optional
accessories, and be absolutely sure to take steps to
prevent the TV from falling off.
●
Handle the TV carefully during installation since
subjecting it to impact or other forces may cause
product damage.
●
Take care when fixing wall brackets to the wall.
Always ensure that there are no electrical cables or
pipes in the wall before hanging bracket.
●
To prevent fall and injury, remove the TV from its fixed
wall position when it is no longer in use.
●
Please be advised for wall hanging functionality using
VESA certified bracket (Vertical HDMI cannot be
accessed).