MODE Operating Instructions N 1 2 3 4 5 6 7 8 9 C 0 Digital Progressive LCD TV Model No. TX-26LXD1 TX-32LXD1 Please read these instructions before operating your set and retain them for future reference.
Welcome Dear Panasonic Customer, We hope that you have many years of enjoyment from your new TV. The Quick Start Guide section at the beginning of this instruction book will allow you to use the TV as quickly as possible. We recommend that you then read the complete instruction book, and keep it to refer to as you explore the range of advanced features that this LCD TV offers.
Warnings and Precautions • This TV set is designed to operate on AC 220-240 V, 50 / 60 Hz. • To prevent damage which might result in electric shock or fire, do not expose this TV set to rain or excessive moisture. This TV must not be exposed to dripping or splashing water and objects filled with liquid, such as vases, must not be placed on top of or above the TV. • WARNING : HIGH VOLTAGE!!! Do not remove the rear cover as live parts are accessible when it is removed.
Accessories Check that you have the accessories and items shown Operating Instruction book (TQBC0767) Remote Control Transmitter (EUR7635010) Batteries for the Remote Control Transmitter (2 × R6 (UM3) size) TV Guarantee MODE N 1 2 3 4 5 6 7 8 9 C 0 Fitting remote control batteries 1 2 3 + - + - “R6 (UM3)” size Pull and hold the hook, then open the battery cover. Insert batteries - note correct polarity ( + and -). Replace the cover.
Cable cover removal and fitting Removal 2 1 1. Push down hooks and pull the cover slightly towards yourself to disengage the claws (at 4 points). 2. Slowly pull out in the downward direction. Fitting 1. Insert the claws (at 4 points) at the bottom end. 2. Push until it clicks. 2 1 1 Note: To avoid interference appearing on the screen, do not bundle the RF cable and mains lead together. How to open the front cover Lift up the cover where the mark “ Pull down to close the cover. ” is shown.
Quick Start Guide Connection and setting up options Note: Please ensure that the unit is disconnected from the mains before attaching or disconnecting any leads. Satellite Receiver RF cable (Not supplied) Y AV1 AV2 AV4 Pb Pr Scart cables (Not supplied) L R RF cable (Not supplied) VCR / DVD Recorder Scart Connections • The VCR / DVD Recorder can be connected to the TV using a Scart cable, if you are using a Scart equipped VCR / DVD Recorder. • Use the TV’s any Scart terminal for any VCR.
Quick Start Guide 1 Connect the mains plug to the wall socket. Press the the set on. MODE switch on the TV set to turn OK To switch the TV set to Standby mode, press the button on the remote control. The TV set can be switched on by pressing button again if it was in Standby mode. the N Note: This TV will still consume some power even in the Off mode, as long as the mains plug is still connected to a live mains socket.
Quick Start Guide 4 Owner ID As an added feature, this TV has the option of adding a security code (Owner ID) and personal details into its memory, so that in the unfortunate event of theft it will help the Police to trace the owner. Using the numeric buttons to enter required 4 digit Owner ID PIN NUMBER. If a 4 digit PIN NUMBER was entered, you will be taken automatically to the NAME line.
Basic controls: front panel and remote control F (Function select) Displays the On Screen Display functions, use repeatedly to select from the available functions - Volume, Backlight, Contrast, Brightness, Colour, Sharpness, Tint (in NTSC mode), Bass, Treble, Balance and Tuning mode. STR (Normalization store) Used to store tuning and other function settings.
Using the On Screen Displays Many features available on this TV can be accessed via the On Screen Display menu system. Use the remote control as shown below to access and adjust features as desired. The MENU button is used to open the main menus and also to return to the previous menu. MENU MODE OK The up and down cursor buttons are used to move the cursor and select menus. N The left and right cursor buttons are used to access menus, adjust levels or to select from a range of options.
Picture menu Press the MENU button. MENU MODE OK Move to choose Picture menu. Access Picture menu. N Move to choose menu option. Adjust chosen option or access chosen menu. 1 2 3 4 5 6 7 8 9 C 0 EXIT Press the EXIT button at any time to go back to watching TV. IDTV Viewing mode The Viewing mode menu allows you to select three different screen settings - Dynamic, Normal and Cinema.
Sound menu Press the MODE button to select DVB or Analogue mode. DVB Analogue MODE MODE MENU Press the MENU button. OK Move to choose Sound menu. N Access Sound menu. Move to choose menu option. 1 2 3 4 5 6 7 8 9 C 0 Adjust chosen option or access chosen menu. EXIT Press the EXIT button at any time to go back to watching TV. IDTV Bass Increase or decrease level to enhance or minimise lower, deeper sound output.
Setup menu Press the MODE button to select DVB or Analogue mode. DVB Analogue MODE MODE MENU Press the MENU button. OK Move to choose Setup menu. N Access Setup menu. Move to choose menu option. Adjust chosen option or access chosen menu. 1 2 3 4 5 6 7 8 9 C 0 EXIT Press the EXIT button at any time to go back to watching TV. Q-Link Allows you to select which AV terminal is to be used for data communication between this TV and a compatible recording device. Choose from AV2 and AV4.
Tuning menu – overview During Analogue mode MENU MODE Press the MENU button. OK Move to choose Setup menu. Access Setup menu. N Move to choose Analogue Tuning Menu. Access Analogue Tuning Menu. 1 2 3 4 5 6 7 8 9 C 0 Move to choose menu option. Adjust chosen option or access chosen menu. Press the EXIT button at any time to go back to watching TV. IDTV EXIT Press the OK button after having adjusted some features to store the new settings as the default (replacing the factory setting).
Tuning menu – Programme edit (Analogue mode only) During Analogue mode MENU MODE Press the MENU button. OK Move to choose Setup menu. Access Setup menu. N Move to choose Analogue Tuning Menu. Access Analogue Tuning Menu. 1 2 3 4 5 6 7 8 9 C 0 Move to choose Programme edit. Access Programme edit. IDTV Move to choose programme position (e.g., Prog. 3). Make required change, e.g., moving a programme channel (see the relevant procedure below).
Tuning menu – Programme edit (Analogue mode only) Renaming a programme channel Move to the Name column. Programme edit Prog. 1 2 3 4 5 Choose the new character. The box at the bottom of the screen shows the character currently selected. : : : : : Chan. Name Lock CH44 CH51 CH41 CH47 CH37 XYZ FTP 123 456 Off Off Off Off Off ABCDEFGHIJKLMNOPQRST UVWXYZ+-. 0123456789 Move to the next character position. Continue until renaming is done. Press the OK button to store the new name.
Tuning menu – Auto setup Auto setup automatically retunes your TV. This feature is useful if, e.g., you move house and wish to retune your TV to receive the local stations. DVB Auto setup (During DVB mode) Analogue Auto setup (During Analogue mode) MENU Press the MENU button. MODE Press the MENU button. OK Move to choose Setup menu. Move to choose Setup menu. Access Setup menu. Access Setup menu. Move to choose Analogue Tuning Menu. Move to choose DVB Auto Setup. N Access DVB Auto Setup.
Tuning menu – Manual tuning (Analogue mode only) It is possible to retune individual programme positions: MODE During Analogue mode MENU OK Press the MENU button. Move to choose Setup menu. N Access Setup menu. Move to choose Analogue Tuning Menu. 1 2 3 4 5 6 7 8 9 C 0 Access Analogue Tuning Menu. Move to choose Manual tuning. IDTV Access Manual tuning. Select the programme position to be tuned. 1 CH44 Press repeatedly until required station is found.
Shipping condition Shipping condition allows you to reset the TV to its original condition, i.e. no channels tuned in. This is useful, for example, if you move to a different area when you will probably want the TV to tune itself to your new local stations. This can be done either through the Shipping condition menu or through the Auto setup menu. The Shipping condition menu will reset all data, clearing all analogue and DVB tuning information and resetting all control levels back to factory settings.
Owner ID Owner ID allows you to enter a security code(Owner ID) and personal details into its memory, so that in the unfortunate event of theft it will help the police to trace the owner. If you wish to check the personal details already entered into the TV (except your PIN number), press the F button(Front panel) and hold for 6 seconds(initially the volume level function will appear, as you continue to hold down the F button it will disappear again, and the Owner ID information will appear).
DVB System Setup The DVB System Setup menu provides access to DVB specific options. Note: If DVB transmissions cannot be received clearly, the DVB System Setup menu may not be available. During DVB mode MENU Press the MENU button. MODE OK Move to choose Setup menu. Access Setup menu. N Move to choose DVB System Setup. Access DVB System Setup. 1 2 3 4 5 6 7 8 9 C 0 Move to choose menu option. Adjust chosen option or access chosen menu.
Common Interface Module menu The Common Interface Module menu provides access to software contained on Common Interface (CI) Modules. These can be inserted in the “CI” slot located at the rear of the TV. IMPORTANT NOTES: • Switch off the TV using the front panel switch before inserting or removing a module. • If you are installing a TV software update, please follow the dedicated instructions supplied with the module. • Insert / remove a module straightly to the CI slot.
Favourites Setup menu (DVB mode only) The Favourites Setup menu allows you to select your favourite programme positions and display them as a list in the TV Guide, to allow quick and easy access to the programs you watch most often. During DVB mode MODE MENU Press the MENU button. OK Move to choose Setup menu. N Access Setup menu. Move to choose DVB System Setup. Access DVB System Setup. 1 2 3 4 5 6 7 8 9 C 0 Move to choose Favourites Setup. Access Favourites Setup.
Information banner In DVB mode The Information banner provides access to information on current and upcoming programmes and easy switching between all channels or just those in your Favourites list. Press the (Information) button. MODE An information banner will appear with details of the current programme being broadcast.
System Update menu (DVB mode only) The System Update menu allows the DVB system to check that it has the latest software. If newer software is available, it can be downloaded. During DVB mode MODE OK MENU Press the MENU button. N Move to choose Setup menu. Access Setup menu. 1 2 3 4 5 6 7 8 9 C 0 Move to choose DVB System Setup. Main menu P i c t u r e menu Access DVB System Setup. Move to choose System Update. Sound menu Access System Update. The System Update menu will appear.
DVB Timer programming menu For an external recording device to record DVB programmes, the integrated DVB system must be active to provide the signal. The Timer programming menu allows you to choose programmes that you wish to record. At the correct time, the DVB system will switch on and tune to the correct station (even if the TV is in standby mode).
DVB Timer programming menu Daily and Weekly Timer Programmes While in the Date field of the DVB Timer programming menu, you can select various options to determine how often a recording should be made. Press the down cursor button repeatedly to access the following options: Daily Su–Sa The recording device will record at the same time every day. DVB Timer Programming Pos.
TV Guide The DVB TV Guide displays the current programmes being transmitted, and forthcoming programmes on each DVB channel, up to seven days ahead (If broadcasters transmit the programmes information). GUIDE Press the GUIDE button. Three separate guides can be accessed by pressing the GUIDE button repeatedly. Choose from ‘Category’, ‘Favourites list’ and ‘Type’. The Favourites list can be customised using the DVB System Setup menu (see page 23). After a few moments the DVB TV Guide will be displayed.
Q-Link Q-Link allows the television to communicate with a compatible VCR or DVD Recorder. For Q-Link communication to work, the TV must be connected to a recording device with the “Q-Link”, “NEXTVIEWLINK”, “DATA LOGIC”, “Easy Link”, “Megalogic” or “SMARTLINK” logo using a “fully wired” Scart cable between the AV2 / AV4 terminal of the television and the appropriate terminal on your VCR or DVD Recorder.
Aspect Controls The Widescreen TV will allow you to enjoy viewing the picture at its optimum size and aspect, including widescreen cinema format pictures. Press the ASPECT button repeatedly to move through the seven aspect options: ASPECT Panasonic Auto, 16:9, 14:9, 4:3, Zoom1, Zoom2 and Zoom3 Photo View mode: Panasonic Auto, 16:9, 14:9, 4:3 and Just N OR Press the ASPECT button.
Aspect Controls 16 : 9 16 : 9 16:9 will display a true 16:9 (anamorphic) picture with no aspect distortions. 16 : 9 14 : 9 14 : 9 14:9 will display a 14:9 picture at its standard 14:9 size without any stretching. 14 : 9 4:3 4:3 4:3 will display a 4:3 picture at its standard 4:3 size with no aspect distortions. 4:3 Just (Photo View mode only) Just Use Just when you wish to expand a 4:3 picture to fill the whole screen.
Multi window You can watch two different pictures at the same time, e.g. one from a TV channel and the other from an AV input. Press the MULTI WINDOW button. Whilst the on screen selector keys are displayed, use the Red or Green buttons to move between the picture in picture feature, picture out of picture and picture and picture feature. The on screen selector keys that appear for the features clear after a few seconds.
Picture and text (Analogue mode only) Press the TV/TEXT button, followed by the MULTI WINDOW button to move between viewing teletext and the picture and text feature. Picture and text lets you see the current programme and a page of teletext side by side. Whilst using this feature, the remote control affects the teletext page; if you wish to make changes to the programme viewed press the TV/TEXT button to return to watching the programme on its own then make the desired changes.
Photo View mode Still image data (JPEG) made with a digital camera or digital video camera can be played back using an SD Card / PC Card. Displayable Image Formats: Baseline JPEG 64 × 64 – 8192 × 8192 pixels (sub-sampling 4:2:2 or 4:2:0) Displayable number of folders: Max 100 Notes: • Some parts of an image may not be displayed or the image may be displayed on a smaller scale depending on the size of the image. • Only EXIF standard JPEG images can be displayed on this TV.
Photo View mode Compatible Card SD Card Insertion PUSH SD -EJE SD Card slot SD Card Multi Media Card miniSD Card Removal EJEC CT PC CARD T CARD PUSH Insert it to the depth. SD -EJE EJEC CT PC T CARD CARD Push the center of the card. Direct the label side upward. PC Card Before inserting or removing the PC Card, make sure that the TV is turned off. Otherwise, it may damage the unit. Do not insert anything other than the PC Card.
Photo View mode Picture menu During Photo View mode MODE MENU Press the MENU button. OK Move to choose Picture menu. N Access Picture menu. Move to choose menu option. 1 2 3 4 5 6 7 8 9 C 0 Adjust chosen option or access chosen menu. Press the EXIT button at any time to exit Picture menu. EXIT Backlight, Contrast, Brightness, Colour, Sharpness Increase or decrease the levels of these options according to your personal preference. The picture hue can be adjusted to suit your taste.
Photo View mode When you press the SD button, thumbnail screen is displayed automatically. After that you can choose your desirable view mode between the following three modes. Multi mode 12 images are displayed. 0001 / 0013 PHOTO VIEW MODE Press to select desired image. Exit Select Press the OK button to display Single mode. OK Menu Single Filename Date Pixel : 102-0001 : 30 / 03 / 2002 : 1600X1200 Single mode A single image selected from the index area fills the screen.
VCR / DVD operation The Remote Control is capable of operating some functions of selected Panasonic VCRs and DVD (Digital Versatile Disc) equipment. Some VCR and DVD equipment have different functions, so to ensure compatibility please refer to the equipment’s instruction book or consult your dealer for details. Standby Press to switch the VCR, DVD or DVD recorder to Standby mode. Press again to switch back on.
Teletext operation In Analogue mode • Teletext features may vary depending on the Broadcasting Companies and is only available if the channel selected is transmitting Teletext. • Pressing the MENU button whilst in Teletext operation will display the backlight function with a white bar and the contrast function with a cyan bar, press to alter the setting as required. • Pressing the MENU button whilst in Teletext operation will display special function options at the bottom of the screen.
Teletext operation It is not possible to change the programme position when in News flash, Update or Sub Coded Page Access operation. Blue 1 2 3 4 5 6 7 8 9 VCR 0 Favourite Page (F.P.) Stores a favourite page in memory for instant recall. To store such a page, the TV must OK be in List mode, and the programme position must be from 1 - 25. STTL Press the Blue button, select the page number, then press and hold the OK button. The page number is now stored. Press STTL to recall this page.
Teletext operation MENU Blue Alternatively, if you know which sub page you require, press the MENU button (to display special functions) followed by the Blue button; T**** will be displayed where the page number is normally found. Enter desired sub page number before the T**** disappears. e.g., to select page 6 enter 0, 0, 0 and 6. Press the Yellow button to view the TV picture whilst waiting for more sub pages to be found. The sub pages found will be displayed across the top of the screen.
Audio / video connections It is possible to connect a variety of additional equipment to this TV. The following pages detail how to connect external equipment to the front and rear of the TV. Once your equipment is connected, use the following procedure to view the input: TV/AV Press the TV/AV button. MODE Whilst the on screen selector keys are displayed, press coloured buttons to select the AV source you wish to view.
Audio / video connections How to connect the Audio Output terminals Y AV1 AV2 AV4 L AUDIO IN Pb L Pr R R Amplifier to Speaker System L AUDIO OUT R How to connect the AV1 / 2 / 4 Scart terminals Y AV1 AV2 AV4 Pb AV1: VCR SET TOP BOX DVD PLAYER DVD RECORDER CAMCORDER GAME CONSOLE / COMPUTER(RGB) AV2: VCR / S-VIDEO VCR Q-Link COMPATIBLE VCR DVD PLAYER S-VIDEO CAMCORDER Pr L R AV1/2/4 AV4: Q-Link COMPATIBLE DVD RECORDER DVD PLAYER SET TOP BOX VCR / S-VIDEO VCR S-VIDEO CAMCORDER How to con
Troubleshooting If there is a problem with your TV please refer to the table below to determine the symptoms, then carry out the suggested check. If this does not solve the problem, please contact your local Panasonic dealer, quoting the model number and serial number (both found on the rear of the TV).
DVB Troubleshooting Some problems will only occur when viewing DVB channels. Due to the different techniques involved in digital reception, DVB signal quality can be poor even if you appear to have a strong signal when viewing analogue programmes. The DVB system requires a good quality signal to provide the best picture. When viewing analogue pictures, interference such as signal reflection from nearby buildings or mountains causes ‘ghosting’, but still provides a viewable picture.
Maintenance To clean this set, wipe with a soft, dry cloth. If the surfaces are extremely dirty, use a soft cloth dipped in soap-and-water solution or a weak detergent solution. • Use eyeglass cleaner to remove stubborn dirt from the LCD. • Never use alcohol, paint thinner or benzine to clean this set. • Before using chemically treated cloth, read the instructions that came with the cloth carefully. • Do not wipe the LCD with water. Neutral detergent Wipe the cabinet with a soft cloth.
Specifications Power Source Power Consumption LCD Screen Size Sound Speaker Audio Output Headphones Receiving Systems / Band name Aerial - Rear Operating Conditions Connection Terminals AV1 (Scart connecter) AV2 (Scart connecter) AV3 VIDEO S-VIDEO AUDIO L - R AV4 Scart connecter Component Output AUDIO L - R Others Dimensions ( W × H × D ) Including TV Stand TV Set Only Mass (Weight) TX-26LXD1 AC 220 - 240 V, 50 / 60 Hz Average use : 148 W Standby condition : 1.
Sales and Support Information Customer Care Centre • For UK customers: 08705 357357 • For Republic of Ireland customers: 01 289 8333 • Visit our website for product information www.panasonic.co.uk • E-mail: customer.care@panasonic.co.uk Direct Sales at Panasonic UK • Order accessory and consumable items for your product with ease and confidence by phoning our Customer Care Centre Monday – Friday 9:00am – 5:30pm (Excluding public holidays).