Operating Instructions - Language - English

18
Tuning menu – Manual tuning (Analogue mode only)
During Analogue mode
Press the MENU button.
Move to choose Setup menu.
Access Setup menu.
Move to choose Analogue Tuning Menu.
Access Analogue Tuning Menu.
Move to choose Manual tuning.
Access Manual tuning.
Select the programme position to be tuned.
Press repeatedly until required station is found.
When the desired station is found, press the OK button to store.
The programme position will flash.
Press the EXIT button at any time to go back to watching TV.
It is possible to retune individual programme positions:
It is also possible to use the control panel buttons on the front of your TV to tune individual programme positions:
Press the F button until Tuning mode is reached.
Press the – / or +/ button to access Tuning mode.
Press the TV/AV button to move between Change
programme and Search.
Press the –
/ or +/ button to change programme
position or start search.
When the desired station is found, press the STR
button to store.
The programme position will flash.
Repeat above procedure to tune additional
programme positions.
Press the F button at any time to go back to watching
TV.
Note:
If your VCR is connected to this TV by an RF cable only, choose programme position “0” to tune to the VCR
signals.
Manual tuning (via front panel) (Analogue mode only)
CH44
1
Manual tuning (Front panel)
21 68
- , + : Search
TV / AV : Move cursor
STR : To store
F : To exit
STR F - / + / TV / AV
Manual tuning
Return Exit
Store
Search
down/up
Programme
down/up
21 68
CH44
1
MENU
EXIT
OK
IDTV
OK
123
456
789
C
0
N
MODE