Operating Instructions - Language - English

During Analogue or DVB mode

Press the MENU button.

Move to choose Setup menu.

Access Setup menu.

Move to choose Analogue Tuning Menu.

(In DVB mode, choose Shipping condition, then press OK.)

Access Analogue Tuning Menu.

Move to choose Shipping condition.

Access Shipping condition.

Press OK to start.

Press again, to confirm, each time that you are asked, “Are you sure?”.

Switch the TV off at the mains power switch.

The next time you switch the TV on, Auto setup will begin. Analogue

and DVB stations will be located, sorted and stored ready for use.

See page 17.

Shipping condition allows you to reset the TV to its original condition, i.e. no channels tuned in.

This is useful, for example, if you move to a different area when you will probably want the TV to tune itself to your

new local stations.

This can be done either through the Shipping condition menu or through the Auto setup menu.

The Shipping condition menu will reset all data, clearing all analogue and DVB tuning information and resetting

all control levels back to factory settings.

You may need to adjust your VCR or programme position ‘0’ VCR after operating the Shipping condition menu.

Programme edit

Auto setup

Manual tuning

Shipping condition

Owner ID

Analogue Tuning Menu

Access

Return Exit

Start

All tuning data will be erased

Are you sure ?

Shipping condition

IDTV

123

456

789

MODE