Operating Instructions - Language - English

21
MENU
IDTV
OK
123
456
789
C
0
N
MODE
EXIT
OK
DVB Timer programming
DVB Tuner lock
DVB System Setup
AV2 out
Setup menu
Access
Off
AV2
Q-Link
Off
Shipping condition
Off
New Service Message
Monitor
TV
DVB Auto Setup
Child lock
Power on preference
Off timer
Off
Signal Quality
Common Interface Module
Preferred Subtitles
Settings
DVB System Setup
English
Screensaver Active
Default
Access
Display Timeout
3 seconds
After 2 minutes
System Update
Favourites Setup
Main menu
Picture menu
Setup menu
Sound menu
During DVB mode
Press the MENU button.
Move to choose Setup menu.
Access Setup menu.
Move to choose DVB System Setup.
Access DVB System Setup.
Move to choose menu option.
Adjust chosen option or access chosen menu.
Press the EXIT button at any time to go back to watching TV.
Pressing the OK button after having adjusted some features will store
the setting as the default (replacing the factory setting).
DVB System Setup
Signal Quality
Common Interface
Module
Favourites Setup
Preferred Subtitles
System Update
Display Timeout
Screensaver Active
Settings
The signal quality function displays an indication of signal
quality for each DVB programme position.
The DVB system requires a good quality signal to provide
the best picture. When viewing analogue pictures,
interference such as signal reflection from nearby
buildings or mountains causes ‘ghosting’, but still provides
a viewable picture. For the DVB system, interference such
as this can disrupt the flow of data causing the picture to
appear to be made up of large blocks, or to freeze
intermittently. If the picture disappears completely, this
could mean that signal quality is very poor. If this happens
often, you may need to improve your aerial system to
provide a better signal.
The Common Interface Module menu provides access
to functions contained on a Common Interface Module
inserted into the CI slot, located at the rear of the TV. See
page 22.
Allows you to select your favourite programme positions
and display them as a list in the TV Guide. See page 23.
This option allows you to select the language in which
subtitles should appear (if available) when the STTL
button is pressed.
The DVB System Setup menu provides access to DVB specific options.
Note: If DVB transmissions cannot be received clearly, the DVB System Setup menu may not be available.
This menu allows you to download new software to the television. See page 25.
This option allows you to set how long the information banner stays on screen. Select from 0 (no
display) to 10 seconds in 1 second increments.
This option allows you to set the time the screensaver starts. This is for preventing image retention.
Select from Off (no screensaver), After 1, 2, 5 minutes. This option is available for DVB mode.
There are 2 types of Screensaver:
• Scrolling “Panasonic” display - When there is no signal connected and no TV operations.
• Dimmed picture - When viewing digital text or listening to radio channels.
Changes made within the DVB-Setup menu will cause settings to change from “Default” to “User
defined”. To return to the default settings for this TV, select “Default”, then press OK to store your
setting.