Operating Instructions - Language - English

ManualsBrandsPanasonic ManualsAV ProductsTX32LXD1

123

456

789

MODE

DVB

Timer programming

DVB Tuner lock

DVB System Setup

AV2 out

Setup menu

Access

Off

AV2

Q-Link

Off

Shipping condition

Off

New Service Message

Monitor

DVB Auto Setup

Child lock

Power on preference

Off timer

Off

Main menu

Picture menu

Setup menu

Sound menu

Delete

BBC ONE 20/02

--/--

12:00

--:--

12:30

--:--

----

Off

---

Pos. Name

--- ---

Date

Date 20/02/03

Time 12:01

Start End min.

DVB Timer Programming

--/--

--:--

----

---

Pos. Name

--- ---

Date

Date 20/02/03

Time 12:01

Start End min.

DVB Timer Programming

Notes:

• To delete a timer programme, select the recording with the cursor bar and

press the Red button.

• To edit a previously entered timer programme, select it with the cursor bar

and press the OK button.

• Timer programmes can also be entered from the TV Guide. See page 28.

During DVB mode

Press the MENU button.

Move to choose Setup menu.

Access Setup menu.

Move to choose DVB Timer programming.

Access DVB Timer programming.

Press the OK button to begin programming.

Select the Programme position to be recorded.

Move to the Date field.

Set the Date on which recording is to take place.

DVB Timer programming menu

For an external recording device to record DVB programmes, the integrated DVB system must be active to provide the

signal. The Timer programming menu allows you to choose programmes that you wish to record. At the correct time, the

DVB system will switch on and tune to the correct station (even if the TV is in standby mode). If the recording device is

compatible with Q-Link or similar technologies (see page 29) and connected to the TV’s AV2 / AV4 terminal, you do not

need to program the device – the DVB system will control the recording process.

The device must be connected to the TV’s AV2 / AV4 terminal using a SCART cable to record DVB programmes.

The current Date and Time are shown at the top of the menu.

See page 27 for further Date options.

Move to the Start time field

and set the Start time .

Move to the End time field and set the End time .

The duration of the recording is shown in the Min. column.

The channel position, start and end times can also be input

using the numeric keys on the remote control.

Move to the Subtitles field.

If you wish to record subtitles (if available) select Auto.

Press the OK button to store.

Press the EXIT button to leave the DVB Timer Programming screen.

Two minutes before the recording is due to start, a reminder will appear on screen:

Notes:

Thirty seconds before the recording is due to start the DVB system will tune to the correct station. If you were already watching another

DVB station you will see the station change on screen. If you were watching an analogue channel, you will not see the change.

You can continue to watch analogue stations while a timer recording is in progress.

If you attempt to switch to another DVB programme position while a timer recording is in progress the message “DVB prog. is locked

for recording” will be displayed. Press the OK button to continue recording, or EXIT to unlock the programme position. Beware that if

you press EXIT, timer programming for this DVB position will be immediately deleted.

To immediately cancel a recording that is already in progress, press GUIDE then EXIT.

VCR

123

456

789

EXIT

Press the OK button to remove the reminder from the screen.

If you wish to cancel the recording, press the EXIT button.

EXIT

Note:

The above 2 operations will not be necessary if the TV set is in standby mode.