Operating Instructions - Language - English

41
Alternatively, if you know which sub page you require, press the MENU button (to display
special functions) followed by the Blue button; T**** will be displayed where the page
number is normally found.
Enter desired sub page number before the T**** disappears.
e.g., to select page 6 enter 0, 0, 0 and 6.
Press the Yellow button to view the TV picture whilst waiting for more sub pages to be
found. The sub pages found will be displayed across the top of the screen.
When the page is available, press the Yellow button to view the page. Regardless of
how many pages are found, pressing the Yellow button will take you to the sub page
which you requested.
Press the TV/TEXT button to return to normal TV operation.
INDEX
When in FASTEXT operation
Press the INDEX button to return to the main index page.
Depending on the way information is transmitted, this may have to be pressed more
than once to return to the main index page.
DVB teletext services
DVB teletext services differ greatly from analogue teletext. When you switch to a DVB
teletext service, the images you see can contain graphics and text, laid out and controlled
in a manner decided by the broadcaster. In all cases, it is possible to navigate the
pages using buttons on the remote control, but because the commands available must
apply to all manufacturers of DVB equipment, some on screen commands may not
correspond exactly to the remote control buttons.
For example:
• For the on screen command ‘select’ or ‘go’, use the OK button.
• If you see the
symbols, use the appropriate CURSOR keys.
• If you see a line of key words displayed in red, green, yellow and blue, use the coloured
multifunction buttons to operate the functions.
• For numbered options, use the numeric keypad.
• The TV/TEXT button should allow you to exit the teletext system. Alternatively, press
the Channel up / down buttons to select another channel.
As soon as you switch to a DVB channel with links to a teletext service, software is
downloaded in the background to enable the teletext function. This means that when
switching to a DVB channel, you should wait for approximately 5 seconds before pressing
the TV/TEXT button – this will allow the software to download. If you press the TV/
TEXT button before download is complete, there will be a short delay before the text
screen is displayed.
While navigating DVB teletext, you will find there is a short delay when moving between
pages while the page downloads.
There is often a prompt shown somewhere on the page (for example “Loading”) to let
you know what is happening.
Teletext operation
INDEX
Blue
MENU
VCR
123
456
789
0
OK
TV/TEXT
In DVB mode