Manualshelf

Operating Instructions - Language - English

ManualsBrandsPanasonic ManualsAV ProductsTX32LXD1
12345678910
5
1
1
2
1
2
Cable cover removal and fitting
Removal
Fitting
1. Insert the claws (at 4 points) at the bottom end.
2. Push until it clicks.
Adjust the LCD panel to your desired angle. The LCD panel can be swiveled up to 40 ° in the right-and-left direction.
How to use the LCD stand
Note:
To avoid interference appearing on the screen, do not bundle the RF cable and mains lead together.
1. Push down hooks and pull the cover slightly towards
yourself to disengage the claws (at 4 points).
2. Slowly pull out in the downward direction.
Note:
The LCD panel cannot be tilted forward and backward.
Lift up the cover where the mark “
” is shown.
Pull down to close the cover.
Front
(View from the top)
How to open the front cover