MODE OK 1 2 3 4 5 6 7 8 9 0 C N PULL IDTV Operating Instructions Digital Progressive LCD TV Model No. TX-26LXD52 TX-32LXD52 The image shown is for illustration only. (U.K. Standard) Please read these instructions before operating your set and retain them for future reference.
Welcome Dear Panasonic Customer, We hope that you have many years of enjoyment from your new TV. The Quick Start Guide section at the beginning of this instruction book will allow you to use the TV as quickly as possible. We recommend that you then read the complete instruction book, and keep it to refer to as you explore the range of advanced features that this LCD TV offers.
Warnings and Precautions • This TV set is designed to operate on AC 220-240 V, 50 / 60 Hz. • To prevent damage which might result in electric shock or fire, do not expose this TV set to rain or excessive moisture. This TV must not be exposed to dripping or splashing water and objects filled with liquid, such as vases, must not be placed on top of or above the TV. • Keep unneeded small parts and other objects out of the reach of small children. These objects can be accidentally swallowed.
Accessories Check that you have the accessories and items shown Operating Instructions Remote Control Transmitter (EUR7651080) Batteries for the Remote Control Transmitter (2 × R6 (UM3) size) MODE OK 1 2 3 4 5 6 7 8 9 C 0 N IDTV Clamper (TMME203) Pan European Guarantee Card 1 Year Guarantee Registration Fitting remote control batteries 1 2 3 + - + - “R6 (UM3)” size Pull and hold the hook, then open the battery cover. Insert batteries - note correct polarity ( + and -).
Cable cover removal and fitting Removal 1. Push down hooks and pull the cover slightly towards yourself to disengage the claws (at 3 points). 2. Slowly pull out in the downward direction. Fitting 1. Insert the claws (at 3 points) at the bottom end. 2. Push until it clicks. Note: To avoid interference appearing on the screen, do not bundle the RF cable and mains lead together. How to open the front cover PULL PULL Raise the lower part of the door marked “PULL”.
Quick Start Guide Connection and setting up options Note: Please ensure that the unit is disconnected from the mains before attaching or disconnecting any leads.
Quick Start Guide 1 Connect the mains plug to the wall socket. Press the [ the set on. MODE ] switch on the TV set to turn OK To switch the TV set to Standby mode, press the button on the remote control. The TV set can be switched on by pressing button again if it was in Standby mode. the PULL Note: This TV will still consume some power even in the Off mode, as long as the mains plug is still connected to a live mains socket.
Quick Start Guide 4 Owner ID As an added feature, this TV has the option of adding a security code (Owner ID) and personal details into its memory, so that in the unfortunate event of theft it will help the Police to trace the owner. Using the numeric buttons to enter required 4 digit Owner ID PIN NUMBER. If a 4 digit PIN NUMBER was entered, you will be taken automatically to the NAME line. MODE OK 1 2 3 4 5 6 7 8 9 0 VCR If not, using the left or right cursor buttons move to the NAME line.
Basic controls: front panel and remote control On / Off switch STR Used to store tuning in analogue mode. Headphones jack (see page 39) F (Function select) Press repeatedly to select from the available functions through the On Screen Display: - Volume, Contrast, Brightness, Colour, Sharpness, Tint (in NTSC mode), Bass, Treble, Balance and Manual Tuning (analogue mode only - see page 18). TV/AV button (see page 39) Press either button to change TV programme up or down.
Using the On Screen Displays Many features available on this TV can be accessed via the On Screen Display menu system. Use the remote control as shown below to access and adjust features as desired. The MENU button is used to open the main menus and also to return to the previous menu. MENU MODE OK The up and down cursor buttons are used to move the cursor and select menus. The left and right cursor buttons are used to access menus, adjust levels or to select from a range of options.
Picture menu Press the MENU button. MENU MODE Move to Picture menu. OK Access Picture menu. Move to menu option. 1 2 3 4 5 6 7 8 9 C 0 Adjust chosen option or access chosen menu. N EXIT Press the EXIT button at any time to go back to watching TV. Viewing mode The Viewing mode menu allows you to select four different screen settings - Dynamic, Normal, Cinema and Auto.
Sound menu Press the MODE button to select DVB or Analogue mode. DVB Analogue MODE MODE MENU Press the MENU button. OK Move to Sound menu. Access Sound menu. Move to menu option. Adjust chosen option or access chosen menu. Press the EXIT button at any time to go back to watching TV. 1 2 3 4 5 6 7 8 9 C 0 N EXIT IDTV Bass Increase or decrease level to enhance or minimise lower, deeper sound output. Treble Increase or decrease level to enhance or minimise sharper, higher sound output.
Setup menu Press the MODE button to select DVB or Analogue mode. Press the MENU button. DVB Analogue MODE MODE MENU OK Move to Setup menu. Access Setup menu. Move to menu option. 1 2 3 4 5 6 7 8 9 C 0 Adjust chosen option or access chosen menu. N Press the EXIT button at any time to go back to watching TV. EXIT IDTV Q-Link AV2 / AV4 out Teletext Off timer Allows you to select which AV terminal is to be used for data communication between this TV and a compatible recording device.
Tuning menu – overview (Analogue mode) In Analogue mode MENU MODE Press the MENU button. OK Move to Setup menu. Access Setup menu. Move to Tuning Menu. 1 2 3 4 5 6 7 8 9 C 0 Access Tuning Menu. N Move to menu option. Adjust chosen option or access chosen menu. IDTV Press the EXIT button at any time to go back to watching TV. Press the OK button after having adjusted some features to store the new settings as the default (replacing the factory setting).
Tuning menu – Programme edit (Analogue mode) In Analogue mode MENU MODE Press the MENU button. OK Move to Setup menu. Access Setup menu. Move to Tuning Menu. 1 2 3 4 5 6 7 8 9 C 0 Access Tuning Menu. N Move to Programme edit. Access Programme edit. IDTV Move to choose programme position (e.g., Prog. 3). Make required change, e.g., moving a programme channel (see the relevant procedure below). EXIT Press the EXIT button at any time to go back to watching TV.
Tuning menu – Programme edit (Analogue mode) Renaming a programme channel Move to the Name column. Programme edit Prog. 1 2 3 4 5 Choose the new character. The box at the bottom of the screen shows the character currently selected. : : : : : Chan. CH44 CH51 CH41 CH47 CH37 Name Lock XYZ FTP 123 456 Off Off Off Off Off ABCDEFGHIJKLMNOPQRST UVWXYZ+-. 0123456789 Move to the next character position. Continue until renaming is done. Press the OK button to store the new name.
Tuning menu – Auto setup (Analogue mode) Auto setup automatically retunes your TV. This feature is useful if, e.g., you move house and wish to retune your TV to receive the local stations. In Analogue mode MENU Press the MENU button. MODE OK Move to Setup menu. Access Setup menu. Move to Tuning Menu. 1 2 3 4 5 6 7 8 9 C 0 Access Tuning Menu. N Move to Auto setup. Access Auto setup. IDTV Press to start Auto setup.
Tuning menu – Manual tuning (Analogue mode) It is possible to retune individual programme positions: MODE In Analogue mode MENU OK Press the MENU button. Move to Setup menu. Access Setup menu. 1 2 3 4 5 6 7 8 9 C 0 Move to Tuning Menu. N Access Tuning Menu. Move to Manual tuning. IDTV Access Manual tuning. Select the programme position to be tuned. 1 CH44 Press repeatedly until required station is found. Manual tuning When the desired station is found, press the OK button to store.
Owner ID Owner ID allows you to enter a security code(Owner ID) and personal details into its memory, so that in the unfortunate event of theft it will help the police to trace the owner. If you wish to check the personal details already entered into the TV (except your PIN number), press the F button(Front panel) and hold for 6 seconds(initially the volume level function will appear, as you continue to hold down the F button it will disappear again, and the Owner ID information will appear).
Shipping condition Shipping condition allows you to reset the TV to its original condition, i.e. no channels tuned in. This is useful, for example, if you move to a different area when you will probably want the TV to tune itself to your new local stations. Note: Owner ID information will not be affected by this function. This can be done either through the Shipping condition menu or through the Auto setup menu.
DVB Setup Menu – overview (DVB mode) In DVB mode MENU MODE Press the MENU button. OK Move to Setup menu. Access Setup menu. Move to DVB Setup Menu. 1 2 3 4 5 6 7 8 9 C 0 Access DVB Setup Menu. N Move to menu option. Adjust chosen option or access chosen menu. IDTV Press the EXIT button at any time to go back to watching TV. Timer Programming Allows you to enter programme times at which the DVB tuner must switch on, ready for recording. See page 22.
Timer Programming menu (DVB mode) For an external recording device to record DVB programmes, the integrated DVB system must be active to provide the signal. The Timer programming menu allows you to choose programmes that you wish to record. At the correct time, the DVB system will switch on and tune to the correct station (even if the TV is in standby mode).
Timer Programming menu (DVB mode) Daily and Weekly Timer Programmes While in the Date field of the DVB Timer programming menu, you can select various options to determine how often a recording should be made. Press the down cursor button repeatedly to access the following options: Daily SU–SA The recording device will record at the same time every day. Daily MO–SA The recording device will record at the same time each day from Monday to Saturday. DVB Timer Programming Pos.
Profile Edit menu (DVB mode) The Profile Edit menu allows you to select your favourite programme positions and display them as a list in the TV Guide or Information banner, to allow quick and easy access to the programmes you watch most often. You can make the 4 kinds of the list. In DVB mode MODE MENU Press the MENU button. OK Move to Setup menu. Access Setup menu. Move to DVB Setup Menu. 1 2 3 4 5 6 7 8 9 C 0 Access DVB Setup Menu. N Move to Profile Edit. Access Profile Edit.
Child Lock menu (DVB mode) You may wish to lock a DVB programme channel to prevent access to it. Note: The data of the PIN number and locked channel will be erased by operating the Shipping condition. In DVB mode MENU MODE Press the MENU button. OK Move to Setup menu. Access Setup menu. Move to DVB Setup Menu. 1 2 3 4 5 6 7 8 9 C 0 Access DVB Setup Menu. N Move to Child Lock. Access Child Lock.
DVB Tuning Menu (DVB mode) DVB Tuning Menu provides access to DVB Tuning features. In DVB mode MENU Press the MENU button. MODE Move to Setup menu. OK Access Setup menu. Move to DVB Setup Menu. Access DVB Setup Menu. 1 2 3 4 5 6 7 8 9 C 0 Move to DVB Tuning Menu. N Access DVB Tuning Menu. Move to menu option. IDTV Adjust chosen option or access chosen menu. EXIT Press the EXIT button at any time to go back to watching TV. DVB Auto Setup Add New Service Automatically retunes your TV.
DVB System Setup (DVB mode) The DVB System Setup menu provides access to DVB specific options. In DVB mode MENU Press the MENU button. MODE OK Move to Setup menu. Access Setup menu. Move to DVB Setup Menu. 1 2 3 4 5 6 7 8 9 C 0 Access DVB Setup Menu. Move to DVB System Setup. N Access DVB System Setup. IDTV Move to menu option. Adjust chosen option or access chosen menu. Press the EXIT button at any time to go back to watching TV.
Common Interface Module menu (DVB mode) The Common Interface Module menu provides access to software contained on Common Interface (CI) Modules. These can be inserted in the “CI” slot located at the rear of the TV. IMPORTANT NOTES: • Switch off the TV using the front panel switch before inserting or removing a module. • If you are installing a TV software update, please follow the dedicated instructions supplied with the module. • Insert / remove a module straightly to the CI slot.
System Update menu (DVB mode) From time to time new versions of software will become available to enhance the performance and features of this TV. Auto Update Search in Standby (Overnight) During the night time, this TV will automatically search for any new available software being broadcast. If a new software version is found, the unit will automatically download and install this new version. At the end of this process the unit will reset.
TV Guide - Electronic Programme Guide (EPG) (DVB mode) The DVB TV Guide displays the current programmes being transmitted, and forthcoming programmes on each DVB channel, up to about one week ahead (If broadcasters transmit the programmes information). When you are using the TV for the first time or you have not used it for about one week, it takes thirty to forty minutes after turning the TV on to display the TV Guide fully. Press the GUIDE button.
Information banner In DVB mode MODE Information banner will appear when changing channel, or pressing the (Information) button. The banner gives the user information about the channel and programme currently being viewed. The banner will time out and disappear from the screen after a set time period, this time period can be set in the DVB System Setup menu. See page 27.
Q-Link Q-Link allows the television to communicate with a compatible VCR or DVD Recorder. For Q-Link communication to work, the TV must be connected to a recording device with the “Q-Link”, “NEXTVIEWLINK”, “DATA LOGIC”, “Easy Link”, “Megalogic” or “SMARTLINK” logo using a “fully wired” Scart cable between the AV2 / AV4 terminal of the television and the appropriate terminal on your VCR or DVD Recorder. See page 13 for details of Q-Link terminal setup.
Aspect Controls The Widescreen TV will allow you to enjoy viewing the picture at its optimum size and aspect, including widescreen cinema format pictures. Press the ASPECT button repeatedly to move through the aspect options. ASPECT OR Press the ASPECT button. Whilst the on screen selector keys are displayed, use the Red or Green buttons to move in either direction through the aspect options.
Aspect Controls 16 : 9 16 : 9 16:9 will display a true 16:9 (anamorphic) picture with no aspect distortions. 16 : 9 14 : 9 14 : 9 14:9 will display a 14:9 picture at its standard 14:9 size without any stretching. 14 : 9 4:3 4:3 4:3 will display a 4:3 picture at its standard 4:3 size with no aspect distortions. 4:3 Zoom1 Zoom1 Zoom1 will display 16:9 letterbox or 4:3 pictures with no aspect distortions.
VCR / DVD operation The Remote Control is capable of operating some functions of selected Panasonic VCRs and DVD (Digital Versatile Disc) equipment. Some VCR and DVD equipment have different functions, so to ensure compatibility please refer to the equipment’s instruction book or consult your dealer for details. VCR DVD DVB DIRECT Analogue TV REC MODE GUIDE VCR / DVD switch Use this switch to select whether controls operate the DVD equipment or VCR.
Teletext operation In Analogue mode • Teletext features may vary depending on the Broadcasting Companies and is only available if the channel selected is transmitting Teletext. • Pressing the MENU button whilst in Teletext operation will display the contrast function with a cyan bar, press the left and right cursor buttons to alter the setting as required. • Pressing the MENU button whilst in Teletext operation will display special function options at the bottom of the screen.
Teletext operation It is not possible to change the programme position when in News flash, Update or Sub Coded Page Access operation. Blue 1 2 3 4 5 6 7 8 9 0 VCR Favourite Page (F.P.) Stores a favourite page in memory for instant recall. To store such a page, the TV must be in List mode, and the programme position must be from 1 - 25. STTL Press the Blue button, select the page number, then press and hold the OK button. The page number is now stored. Press the STTL button to recall this page.
Teletext operation MENU Blue Alternatively, if you know which sub page you require, press the MENU button (to display special functions) followed by the Blue button; T**** will be displayed where the page number is normally found. Enter desired sub page number before the T**** disappears. e.g., to select page 6 enter 0, 0, 0 and 6. Press the Yellow button to view the TV picture whilst waiting for more sub pages to be found. The sub pages found will be displayed across the top of the screen.
Connections It is possible to connect a variety of additional equipment to this TV. The following pages detail how to connect external equipment to the front and rear of the TV. Once your equipment is connected, use the following procedure to view the input: While viewing a TV channel Press the TV/AV button. TV/AV MODE Whilst the on screen selector keys are displayed, select the page by pressing the Red or Blue button and then press coloured buttons to select the AV source you wish to view.
Connections To bundle the cables with the clamper To tighten: To loosen: Pull Pull Keep the knob pressed. Note: Do not put the RF cable and the mains lead together to avoid noise.
Connections How to connect the HDMI Input terminal HDMI (High Defi nition Multi media Interface) is the first all-digital consumer electronics A/V interface that supports uncompressed standard. The HDMI terminal supports both video and audio information. An HDMI-compliant device *1 , such as a Set Top Box or DVD player with HDMI or DVI output terminal can be connected to the HDMI input terminal. • If the external device has DVI output only, use a DVI to HDMI adapter cable *2 to connect to the HDMI terminal.
Troubleshooting If there is a problem with your TV, please refer to the table below to determine the symptoms, then carry out the suggested check. If this does not solve the problem, please contact your local Panasonic dealer, quoting the model number and serial number (both found on the rear of the TV).
Troubleshooting Some problems will only occur when viewing DVB channels. Due to the different techniques involved in digital reception, DVB signal quality can be poor even if you appear to have a strong signal when viewing analogue programmes. The DVB system requires a good quality signal to provide the best picture. When viewing analogue pictures, interference such as signal reflection from nearby buildings or mountains causes ‘ghosting’, but still provides a viewable picture.
Scart and S-video terminal information AV1 Scart terminal (RGB, VIDEO) Socket Earth 21 CVBS out (video) 19 CVBS earth 17 Red in 15 Red earth 13 Green in 11 Green earth 9 Blue in 7 Blue earth 5 Audio out (L) 3 Audio out (R) 1 AV2 Scart terminal (VIDEO, S-VIDEO, Q-Link) Socket Earth 21 CVBS out (video) 19 CVBS earth 17 S.C.
Specifications TX-26LXD52 Power Source Power Consumption LCD Visible screen size Sound Speaker Audio Output Headphones Scanning format Receiving Systems / Band name Aerial - Rear Operating Conditions Connection Terminals AV1 (Scart connecter) AV2 (Scart connecter) AV3 VIDEO S-VIDEO AUDIO L - R AV4 (Scart connecter) Others COMPONENT HDMI AUDIO L - R Output AUDIO L - R Dimensions ( W × H × D ) Including TV Stand TV Set Only Weight AC 220 - 240 V, 50 / 60 Hz Average use : 133 W (0.
Specifications TX-32LXD52 Power Source Power Consumption LCD Visible screen size Sound Speaker Audio Output Headphones Scanning format Receiving Systems / Band name Aerial - Rear Operating Conditions Connection Terminals AV1 (Scart connecter) AV2 (Scart connecter) AV3 VIDEO S-VIDEO AUDIO L - R AV4 (Scart connecter) Others COMPONENT HDMI AUDIO L - R Output AUDIO L - R Dimensions ( W × H × D ) Including TV Stand TV Set Only Weight AC 220 - 240 V, 50 / 60 Hz Average use : 169 W (0.
Sales and Support Information Customer Care Centre • For customers within the UK : 08705 357357 • For customers within the Republic of Ireland : 01 289 8333 • Visit our website for product information www.panasonic.co.uk • E-mail: customer.care@panasonic.co.uk Direct Sales at Panasonic UK • Order accessory and consumable items for your product with ease and confidence by phoning our Customer Care Centre Monday – Thursday 9:00am – 5:30pm, Friday 9:30am – 5:30pm (Excluding public holidays).
Information on Disposal for Users of Waste Electrical & Electronic Equipment (private households) This symbol on the products and/or accompanying documents means that used electrical and electronic products should not be mixed with general household waste. For proper treatment, recovery and recycling, please take these products to designated collection points, where they will be accepted on a free of charge basis.
