Operating Instructions

7
Quick Start Guide
OPTION SD CARD
EXIT ASPECT
RETURN
INPUT
DIRECT TV REC
F.P.
N
Cursor buttons
•
Makes selections and adjustments
Standby On / Off switch
•
Switches TV On or Off standby
Sound Mute
•
Switches sound mute On or Off
Surround (p. 20)
•
Switches Surround sound
Programme Up / Down
•
Selects programme in sequence
Teletext (p. 14)
•
Switches to teletext mode
OK
•
Confi rms selections and choices
•
Press after selecting programme positions
to quickly change programme
VCR / DVD Panasonic equipment
operations (p. 17)
Volume Up / Down
Programme Information (p. 13)
•
Displays programme information
Index (p. 15)
•
Returns to the teletext index page
(teletext mode)
Coloured buttons
•
Used for the selection, navigation and
operation of various functions
Exit
•
Returns to the normal viewing screen
Direct TV Recording (p. 33 and p. 35)
•
Records programme immediately in
DVD Recorder / VCR with Q-Link or
VIERA Link connection
Numeric buttons
•
Changes programme and teletext pages
•
When in Standby mode, switches TV On
VIERA Link Menu (p. 35)
•
Press to access VIERA Link Menu directly
Aspect (p. 13)
•
Changes aspect ratio from Aspect Selection list
•
Also possible by pressing this button
repeatedly until you reach the desired aspect
Option Menu (p. 12)
•
Easy setting for viewing and sound options
Main Menu (p. 18)
•
Press to access VIERA Link, Picture,
Sound and Setup Menus
Favourite Page (p. 15)
•
Calls up the teletext page stored in blue button
Input mode selection
•
TV - switches to TV mode (p. 16)
•
AV - switches to AV input mode from Input
Selection list (p. 16)
SD Card (p. 30)
•
Switches to SD Card viewing mode
Return
•
Returns to the previous menu
Hold
•
Freeze / unfreeze picture (p. 12)
•
Holds the current teletext page (teletext
mode) (p. 15)
Normalize (p. 18)
•
Resets picture and sound settings to their
default levels
TV
Remote Control
•
Identifying Controls
•
Accessories / Options
Identifying Controls
C.A.T.S. (Contrast Automatic Tracking System) sensor
•
Senses brightness to adjust picture quality in “Eco” mode in Picture Menu (p. 20)
Mains power On / Off switch
•
Switch On to turn on the TV
or turn the TV to standby mode
by the remote control
Remote control signal receiver
Increases or decreases the programme
position by one. When a function is
already displayed, press to increase or
decrease the selected function. When
in Standby mode, switches TV On.
Function select
•
Volume / Contrast / Brightness / Colour / Sharpness /
Tint (NTSC mode) / Bass / Treble / Balance / Auto Setup (p. 25)
SD Card slot (p. 31)
Power LED
•
Standby: red
On: green
•
When using the remote control, indicates
the TV has received a command.
Swing door to open
Changes the
input mode
HDMI3
terminal (p. 38)
Headphones jack (p. 38)
AV3 terminals
(p. 38)