Operating instructions

64
On screen messages
Message Meaning / Action
All tuning data will be erased
•
“Shipping Condition” will erase all tuning data (p. 42).
Are you sure ?
•
Confi rm correct operation.
Are you sure you want to delete this timer ?
Press OK to delete timer
Press RETURN to return
•
Confi rm correct operation.
Bad Signal
•
The signal is weak. Check the aerial.
Child Lock is active !
Press OK to enter PIN
•
The selected programme is locked in Child Lock (p. 41).
Ethernet cable not connected
•
Check the connection of the LAN cable. If you use a hub, also check the
light on the hub is lit.
Faulty dish
•
The satellite cable might be short-circuited or there might be connection
problems of the cable. Please check the cable and connection and then
turn the TV Off with the Mains power On / Off switch, and turn it On again.
Feature not available
•
It is not possible to record these sources (COMPONENT / HDMI / PC).
Gateway does not answer.
Please confi rm connection and setting of
router.
•
A connection failure has occurred and the gateway is not responding.
Check the settings and connections of the router.
Invalid operation - Please check settings
and connections
•
Check the Q-Link or VIERA Link connection and setting (p. 50 - 52).
Invalid system time. Please exit !
•
Cannot get the time information. Check the connection of the RF cable.
IP address confl ict
•
Duplicate IP address has been detected. Check the IP address of other
equipment such as computers, routers and ensure that there are no
duplicate IP address.
IP address not set
•
Please enter an IP address.
Manual IP setting not correct
•
The system is unable to set the IP address. Please consult your Internet
Service Provider or telecommunications company.
Max. number of Timers already set !
•
The maximum number of timer programming events is 15.
New DVB Service Found!
Press OK start Auto Setup
Press EXIT to ignore.
Selecting Auto Setup will delete
current Profi le and Childlock settings
•
There is a new DVB service or programme.
New version 1.90 found.
Do you really want to update the
software and reboot the system ?
Press OK to download the new version
Press EXIT to ignore
•
There is a new software available.
No DVB Service found
Please check aerial or local
DVB service availability.
Press OK to start Auto Setup
•
Please follow the message.
If it is still failed, consult your local Panasonic dealer.
No module inserted
•
Check the CI module inserted completely (p. 36).
No Recording - Check media
•
The tape or disc may be “write protected”, missing or damaged.
No Recording - Already recording
•
The equipment may already be recording.
No Recording - Unknown reason
•
The recording may not be performed. Check the equipment.
•
Disc or tape may be full.