Operating Instructions

12
English
Auto Setup is now complete and your
TV is ready for viewing.
If tuning has failed, check the connection of the RF
cable, and then follow the on-screen instructions.

To retune all channels
[Automatic Channel Search] (p. 21)

To initialise all settings
[Shipping Condition] (p. 21)
Watching TV
1 Turn power on
(TV)
or
(Remote Control)

Mains power On / Off switch should be on. (p. 10)
2 Select the mode
3 Select a channel
up
down
or

To select 2 or more-digit channel position number,
e.g. 399
Note

The TV will automatically go into Standby mode when
no operation is performed for the period selected in
[Auto Standby] (Timer Menu).
Aspect
Change the aspect ratio (image size)
[Auto]: The best ratio is selected automatically
according to the “Aspect Control Signal” (p. 26).
[16:9]: Directly displays the image at 16:9 without
distortion (anamorphic).
[14:9]: Displays the image at the standard 14:9 without
distortion.
[Just]: Displays a 4:3 image full-screen. Stretching is
only noticeable at the left and right edges.
[4:3]: Displays the image at the standard 4:3 without
distortion.
[4:3 Full]: Displays a 4:3 image enlarged horizontally to
fit the screen.

For HD (High definition) signals
[Zoom 1]: Displays a 16:9 letterbox or 4:3 image without
distortion.
[Zoom 2]: Displays a 16:9 letterbox (anamorphic) image
full-screen without distortion.
[Zoom 3]: Displays a 2.35:1 letterbox (anamorphic)
image full-screen without distortion. At 16:9, displays the
image at its maximum (with slight enlargement).