Operating Instructions

18
English
Equaliser
Adjusts the frequency level to suit your favourite sound
quality.

This function is available when [Mode] is set to [User].

Select the frequency and change the frequency level
by using the cursor button.

To enhance the bass sound, raise the level of the
lower frequency. To enhance the treble sound, raise
the level of the higher frequency.

To reset the levels of each frequency to the default
settings, select [Reset to Defaults] by using the cursor
button.
Balance
Adjusts volume level of right and left speakers.
Headphone Volume
Adjusts the volume of headphones.
Surround
Provides a dynamic enhancer of width to simulate
improved spatial effects.
Auto Gain Control
Automatically regulates large sound level differences
between channels and inputs.
Volume Correction
Adjusts the volume of each individual channel or input
mode.
Speaker Distance to Wall
Compensates for the low frequency sound due to the
distance between the speakers and the wall.

If the back space between the TV and wall is within
30 cm, [Up to 30cm] is recommended.

If the back space between the TV and wall is over
30 cm, [Over 30cm] is recommended.
Preferred Audio 1 / 2
Selects the first and second preferred language for DVB
multi audio (depending on the broadcaster).
MPX
Selects multiplex sound mode. (if available)
[Stereo]: Use this normally.
[Mono]: When stereo signal cannot be received.
[M1] / [M2]: Available while mono signal is transmitted.

For Analogue mode
Colour Matrix
Selects the suitable colour parameter for SD (Standard
definition) or HD (High definition) signal.

This function is available with 480p or 576p input
signal from COMPONENT or HDMI terminal.
AV Colour System
Selects optional colour system based on video signals.

For AV input
16:9 Overscan
Selects the screen area displaying the image for 16:9
aspect.
[On]: Enlarges the image to hide the edge of the image.
[Off]: Displays the image in the original size.

Set to [On] if noise occurs on the edge of the screen.

This function can be memorised for SD (Standard
definition) and HD (High definition) signals
respectively.
Reset to Defaults
Resets the current Picture Viewing Mode of the selected
input to the default settings.
Sound
Mode
Selects your favourite sound mode.

The selected mode affects all input signals.
[Music]: Improves sound quality for watching music
videos, etc.
[Speech]: Improves sound quality for watching news,
drama, etc.
[User]: Adjusts the sounds manually by using the
equaliser to suit your favourite sound quality.

For the User mode, [Equaliser] will be available in the
Sound Menu instead of [Bass] and [Treble]. Select
[Equaliser] and adjust the frequency.

This function is not effective for the sound from
headphones.
Bass
Adjusts level to enhance or minimise lower, deeper
sound output.
Treble
Adjusts level to enhance or minimise sharper, higher
sound output.