Operating Instructions

21
English
Tuning and Editing
Channels
You can retune channels or make your favourite channel
lists, skip unwanted channels, etc.
[Setup] [Tuning Menu]
*
*
The menu name varies depending on the TV mode.

The settings in [Tuning Menu] are applicable only for
the selected TV mode.
Retuning channels

Only the selected mode is retuned. All the previous
tuning settings are erased.
Select [Automatic Channel Search]
Automatic Channel Search Access
Manual Tuning
 Analogue Manual Tuning
Set Analogue channel manually after [Automatic
Channel Search].
1 Enter the frequency to start scanning
Analogue Manual Tuning
Searching channels
Start Frequency (MHz) 48.00
Scan up Scan down
2 Select the scanning method
[Scan up]: Scans ascendingly from the entered
frequency to higher frequencies.
[Scan down]: Scans descendingly from the entered
frequency to lower frequencies.
 DVB Manual Tuning
Normally use [Automatic Channel Search] or [Scan] to
retune DVB channels.
If tuning has not been done completely or for adjusting
the direction of the aerial, use this function.

All channels found will be added to the [Channel List].
DVB-T
Select channel and start scan
DVB-T Manual Tuning
Scan
0%
Antenna
Channel
2
Signal Level
0
Signal Condition
0
System Menu

Shipping Condition
Resets all settings to the original condition.

Common Interface
Sets to watch encrypted channels, etc. (p. 12)

System Update
Downloads new software to this TV. (p. 23)

Software License
Displays the software licence information.

System Information
Displays the system information of this TV.
Power Save
Reduces brightness of the picture to economise on
power consumption.
Note

A different menu will be displayed in the mode of
Media Player. (p. 24)

Only available items can be selected.