Operating Instructions
3D Settings
1. Display the menu with MENU.
2. Select Picture > 3D Settings and press OK to access.
3. Select one of the following items and press OK to access.
3D Mode / 3D Detection / 3D Signal Message / 2D→3DDepth / 3D
Adjustment / L/R Picture Swap / Edge Smoother / Safety Precautions
4. Set the item and press OK to store.
●
To exit the menu screen
EXIT
3D Mode
(3D / 2D)
Selects the viewing mode between 2D and 3D.
●
To select the 3D format manually, set 3D Mode Selection (Manual).
Watching > 3D > 3D Mode Selection
3D Detection
(On (Advance) / On / Off)
Selects whether to switch to the 3D mode automatically or not.
On (Advance):
Detects all the 3D format signals and displays the 3D image
automatically.
On:
Detects particular 3D format signals (Frame Sequential, etc.) and
displays the 3D image automatically.
●
To view 3D images without any notifications and operations, set to On
(Advance).
3D Signal Message
(On / Off)
Selects whether to give a notification message when a signal of 3D format is
found or not.
●
Not valid when 3D Detection is set to On (Advance)
- 93 -