Operating Instructions

English
28
Timer Programming
This function allows you to select programmes that you
want to be reminded to watch or record to the USB
HDD.

For details, refer to [eHELP] (Recording > Timer
Programming).
1 Select DVB-S, DVB-C, DVB-T or
DVB-via-IP
2 Display the menu and select [Timer]
Timer
select
access
3 Select [Timer Programming]
select
access
Set timer event details
1
Start making the settings
2 Select [USB HDD Rec.] or [Reminder]
[USB HDD Rec.]:
Records the programme to the USB HDD.
When the start time comes, the channel will be
switched automatically and the video and audio
signals will be output. 2 minutes before the start time,
a reminder message may appear if you are watching
TV.
[Reminder]:
Reminds you to watch the programme.
When you are watching TV, a reminder message
appears 2 minutes before the start time.
Press the OK button to switch to the programmed
channel.
3 Select and set the item (channel, date, start time, end
time) (repeat the operations as below)
select the item
set

and can also be entered with numeric
buttons.
7 BBC7 17:00 18:30STTL
18:00 20:00
3 ITV1 21:30 22:30
Red Cap
BBC ONE1
Guide
Timer Programming
Function No. Date Start EndChannel Name
Wed 21.10.2015 10:46
USB HDD Rec.
USB HDD Rec.
Reminder
Wed 21.10.2015
(90 min.)
(120 min.)
(60 min.)
Wed 21.10.2015
Thu 22.10.2015
<TIMER>
<TIMER>
Function [USB HDD Rec.] / [Reminder]
TV mode
[
]: DVB-S
[
]: DVB-C
[ ]: DVB-T
[ ]: DVB-via-IP

You cannot change the mode within the
menu.
Channel position, channel name, etc.
Displays subtitles (if available)

To set subtitles for [Reminder]
(yellow)
Date
Start time / End time / Duration (automatic
display)
: Overlapped timer events
[Signal Supported Recording] (if available)

This function is Timer Programming which
is controlled by information from the TV
Guide; if programme start and end times are
changed by the broadcaster, the timer event
will follow the change. Note that this function
only works reliably if correct information is
received from broadcasters.
4 Store
 To edit a timer event
select the event
access
Correct as necessary

To delete a timer event
(red)

To cancel a timer event temporarily
(blue)
•
Press again to stop cancelling.