Operating Instructions
Manual Tuning
Some features are not available on all models. Available menu items are displayed on your TV screen.
●
Normally use Auto Setup or Update Channel List to retune DVB channels.
●
If tuning has not been done completely or for adjusting the direction of the
aerial or dish, use this function. (DVB)
●
All DVB channels found are added to Channel List Editor.
■ DVB (UK only)
1. Select Frequency.
2. Press OK to search.
●
All channels found are added to Channel List.
■ DVB (Ireland only)
1. Select a channel and adjust frequency for each channel.
●
Set where the level of Signal Quality becomes the maximum.
2. Press OK to search.
■ Analogue
Set Analogue channel manually after Auto Setup.
1. Select the channel position with Numeric buttons.
2. Select the channel with Channel Up / Down.
3. Set Manual Tuning.
4. Select Store and press OK to set.
●
Use Fine Tuning to make small adjustments to the tuning of an individual
programme (affected by weather conditions, etc.).
– Ireland only
●
If a VCR is connected only with the RF cable, select channel position 0.
- 110 -