Operating Instructions
Table Of Contents
- Read first
- Home
- Watching
- Recording
- Media Player
- Network
- Internet content
- Home network
- Network connections
- Network settings
- Network Connection
- Custom - Wireless
- Custom - Wired
- Custom - Wireless Access Point
- Network Status
- TV Name
- TV Remote App Settings
- Network Link Settings
- Smart Speaker Settings
- TV>IP Server Settings
- Mirroring Settings
- Control4 Settings
- VOD Content Refresh
- Software Update
- New Software Message
- IPv6
- Terms of Service and Settings
- Samba Interactive TV Settings
- Photos
- Videos
- Music
- Supported format
- Functions
- Settings
- Support
TV>IP Server Settings
Only for the model supporting TV>IP server function
■ Preparations
●
Ensure the network connections and network settings are completed.
Functions > TV>IP > TV>IP server connection
Network > Network settings
●
Ensure that Dual Tuner Mode is set to On in LNB Configuration.
Watching > Tuning and editing channels > Auto Setup
■ TV>IP Server Settings
Selects TV signal and enables tuning in TV>IP server function.
1. Display the menu with MENU, select Main Menu and press OK to access.
2. Select Network > TV>IP Server Settings and press OK to access.
3. Select DVB-S / DVB-C / DVB-T and press OK to set.
●
Selectable TV modes for client vary depending on the channels stored.
Watching > Tuning and editing channels > Auto Setup
4. Select Enable TV>IP server and press OK to access.
5. A confirmation screen is displayed and press OK to set. (The TV
automatically restarts.)
●
Changing the default configuration may result in higher energy
consumption of the product.
●
LED lights orange in Standby mode when this function is active.
= Note =
●
Dual tuner function (watching or recording 2 programmes simultaneously,
watching a programme while recording another programme, etc.) is not
available while using TV>IP server function.
●
Due to network conditions or certain broadcaster restrictions, this function
may not be available.
- 252 -