Operating Instructions
Auto update
You can update new software automatically.
1. Display the menu with MENU.
2. Select Setup > System Menu > System Update > Auto Update Search in
Standby and press OK to access.
3. Select the time and press OK to set.
●
If any software updates are available, a notification message will appear.
To install new software, select Standby / Now and press OK to set.
Standby:
Installs new software in standby condition.
Now:
Installs new software now.
●
If System Update is performed, the software will be updated (TV functions
may be changed). If you do not want to do so, set Auto Update Search in
Standby to Off.
●
The automatic updating cannot be performed in the following conditions:
– TV turned off with Mains Power On / Off switch
– Recording is in progress.
– DVB-via-IP
= Note =
●
Download may take a few hours.
●
During software download and update, DO NOT switch off the TV.
●
A notification message may be a reminder. In this case, schedule
information (the date when the new version can be used) will appear. You
can set the reservation for update. The update will not start when the TV is
off.
- 278 -