Operating Instructions

Edit Analogue Channels
To swap / move the channel position (if available)
1) Press
(green) to edit.
2) Set the new position with Cursor buttons and press
(green) to
store.
To retune each channel (Manual Tuning)
(red)
To rename the channel name
1) Press
(blue) to edit.
2) Enter characters (maximum 5 characters) with Cursor buttons or
Numeric buttons, and press OK to set.
3) Press BACK/RETURN to store.
= Note =
If a VCR is connected only with the RF cable in Analogue, edit VCR.
- 123 -