Quick Start Guide

10
English
Installing the TV
A Pedestal (L)
B Pedestal (R)
C Assembly screw (4)
Take out the pedestal and the TV from the packing case
and put the TV onto a work table with the screen panel
down on the clean and soft cloth (blanket, etc.).
≥ Use a flat and firm table bigger than the TV.
≥ Do not hold the screen panel part.
≥ Make sure not to scratch or break the TV.
≥ Insert the pedestal firmly, otherwise it may come off
when setting up the TV.
≥ Make sure that all screws are securely tightened.
≥ Do not assemble the pedestal by any method other
than those specified below.
Be sure to remove the pedestal in the following
procedures when you use the wall-hanging bracket or
repack the TV.
1 Put the TV onto a work table with the screen panel
down on the clean and soft cloth.
2 Remove the assembly screws C from the pedestal.
3 Pull out the pedestal from the TV.
M4 × 19 (mm)
M5 × 20 (mm)
M5 × 27 (mm)
M6 × 33 (mm)
Preparations
Assembling the pedestal
43-inch model
50-inch model
55-inch model
65-inch model
75-inch model
Removing the pedestal
1
(L)
(R)
A
B
2
C
TX-43_50_55_65_75LX800B_72-LX800B-E32Z1_eng.book 10 ページ ２０２２年６月２０日 月曜日 午後６時４５分