Quick Start Guide

15
English
∫ If registration fails
If registration (pairing) is not completed properly, try
registering again.
1 Display the menu and select [Settings]
2 Select [Remote Control]
3 Select [Pairing Start]
≥ The registration screen is displayed, so follow the
on-screen instructions to register.
∫ When the remote control does not respond
1 Press and hold the buttons shown below
simultaneously for about 3 seconds
2 Point the remote control at the remote control signal
receiver and follow the procedure below to deregister
(unpair) the remote control
[Settings] [Remote Control]
[Unpair]
3 Register (pair) the remote control again “If
registration fails” (p. 15)
≥ For details, refer to [eHELP] (Search by Purpose >
Settings > Remote Control).
≥ If the remote control is not registered (paired) with the
TV, they communicate via infrared. Face the remote
control at the TV’s remote control signal receiver for
operation when infrared communication is used.
Please note that voice controls will not be available.
≥ If the remote control is registered (paired) with the TV,
they communicate via Bluetooth
®
. You will not need to
face the remote control at the TV’s remote control
signal receiver when Bluetooth
®
communication is
used.
Please note, however, that when the LED is red
(standby) indicating that the TV is turned off, you will
need to face the remote control at the TV’s remote
control signal receiver for operation in order to turn on
the TV.
1 select
2 access
Settings
Note
TX-43_50_55_65LXx88x_72-LXT886-X32Z2_eng.book 15 ページ ２０２２年６月２０日 月曜日 午後６時５２分