Quick Start Guide

18
English
1 Ambient sensor
≥ Senses brightness to adjust picture quality when
[Ambient Sensor] in the Picture menu is set to [On].
2 Remote control signal receiver (for infrared
communication)
≥ Do not place any objects between the TV remote
control signal receiver and remote control.
3Power LED
≥ The LED blinks when an infrared signal is received
from the remote control.
4 Mains power On / Off switch
≥ Press the switch to turn on.
When the TV is on, press and hold the switch to
turn off. Keep pressing until it turns off.
≥ When the TV is on, press the switch to display the
operation guide.
Operation guide (Example):
The item selection switches between Power,
Volume, Channel, Input*, and Restart each time
you press the switch, and pressing and holding
enables item operation. Follow the on-screen
messages.
Press the switch to select the input when the input
selection list appears. Wait without any operation to
finish your selection.
≥ To turn Off the apparatus completely, you must pull
the mains plug out of the mains socket.
≥ [ ]: Standby / On (Bottom of the TV)
Initial Setup
When the TV is turned on for the first time, it will
automatically search for available TV channels and give
options to set up the TV.
≥ These steps are not necessary if the setup has been
completed by your local dealer.
≥ Please complete connections (p. 11 - 14) and settings
(if necessary) of the connected equipment before
starting Initial Setup. For information about the
settings for the connected equipment, read the
manual of the equipment.
1 Plug the TV into a live mains socket
and turn the power on
2 Select the following items
Set up each item by following the on-screen instructions.
Example:
∫ How to use the remote control
Select the language
Register (pair) the Bluetooth
®
remote control
≥ Point the remote control at the TV’s remote control
signal receiver, then press and hold the volume down
button and the Google Assistant (voice control) button
simultaneously for 3 seconds.
Indicator / Control panel
Red: Standby
Green: On
• Depending on the ambient brightness,
adjusts the brightness of LED to easy-
to-view levels automatically.
Orange: Standby with some functions (recording,
etc.) active
3
4
1, 2
Bottom of the TV
Power Volume Volume Channel Channel Input Restart
≥ Takes a few seconds to be displayed.
Move the cursor
Access the item / store the setting
Return to the previous item (if available)
Select TV mode
Home
Shop
“Home” mode is optimized for efficient energy usage for home use.
“Shop” mode is optimized to store demo with fixed settings.
TX-43_50_55_65LXx88x_72-LXT886-X32Z2_eng.book 18 ページ ２０２２年６月２０日 月曜日 午後６時５２分