Operating Instructions
Table Of Contents
- Read first
- Home
- Watching
- Recording
- Media Player
- Network
- Internet content
- Home network
- Network connections
- Network settings
- Network Connection
- Custom - Wireless
- Custom - Wired
- Custom - Wireless Access Point
- Network Status
- TV Name
- TV Remote App Settings
- Network Link Settings
- Smart Speaker Settings
- TV>IP Server Settings
- Mirroring Settings
- Control4 Settings
- VOD Content Refresh
- Software Update
- New Software Message
- IPv6
- Terms of Service and Settings
- Samba Interactive TV Settings
- Photos
- Videos
- Music
- Supported format
- Functions
- Settings
- Support
Power LED Indicator
Using Power LED Indicator
Selects the power LED indication mode.
1. Display the menu with MENU, select Main Menu and press OK to access.
2. Select Setup > Other Settings and press OK to access.
3. Select Power LED Indicator and press OK to access.
4. Select On / On(Standby Only) / On(Power on Only) / Off and press OK to
set.
On:
The power LED indicator illuminates continuously.
On(Standby Only):
The power LED indicator illuminates only when the TV is in Standby
mode.
On(Power on Only):
The power LED indicator illuminates only when the TV is turned on.
Off:
The power LED indicator is turned off.
= Note =
●
The power LED indicator may light when switching the TV status or
activating some functions.
●
The TV may not display any image on the screen depending upon the
input source after setting. This may make it impossible to know whether
the TV is turned on or not.
In particular, when Off or On(Power on Only) is selected, notifications
whilst the TV is in standby, cannot be provided, such as USB recording in
progress. If a USB device in recording is removed accidentally in such a
condition, a device malfunction or data destruction may result.
- 280 -