Operating Instructions
Table Of Contents
- Read first
- Home
- Watching
- Recording
- Media Player
- Network
- Internet content
- Home network
- Network connections
- Network settings
- Network Connection
- Custom - Wireless
- Custom - Wired
- Custom - Wireless Access Point
- Network Status
- TV Name
- TV Remote App Settings
- Network Link Settings
- Smart Speaker Settings
- TV>IP Server Settings
- Mirroring Settings
- Control4 Settings
- VOD Content Refresh
- Software Update
- New Software Message
- IPv6
- Terms of Service and Settings
- Samba Interactive TV Settings
- Photos
- Videos
- Music
- Supported format
- Functions
- Settings
- Support
Voice Control function does not work
●
Confirm the remote control is paired with this TV. If the remote control is
not paired, set Remote Control Settings in Setup.
Functions > Voice Control > Settings
●
Voice Control function may not work properly depending on the
pronunciation, noise and network environment.
●
For details of the Voice Control function
Functions > Voice Control
●
Check the connections and settings.
Network > Network connections
Network > Network settings
LED does not light
●
Set Power LED Indicator in the Setup Menu to On.
Functions > Power LED Indicator > Using Power LED Indicator
LED does not light red in Standby mode
●
LED lights orange in Standby mode in the following conditions:
– On Timer is set to On.
– Recording is in progress.
– Timer Programming is set.
– Home Network Server is set to On.
– Powered On by Apps is set to On.
– Home Streaming is set to Always.
– Powered On by Easy Mirroring is set to On.
– VOD Content Refresh is set to On and VOD content is updated.
– TV>IP Server Settings is set to Enable TV>IP server.
●
LED lights orange during adjustment of the panel (approx. 10 minutes).
LED lights orange again in standby mode when the TV is turned on / off
before the panel adjustment is completed.
- 370 -