Operating instructions

3.2. Ornament Panel

1. The Ornament Panel is secured by (3) striker pins. Grip the

Ornament Panel at the side corner pull to remove.

3.3. Cabinet (Top)

1. Remove (11) Screws.

3.4. Speaker Grille

1. Remove (2) screws.

3.5. Speaker Ass´y

1. Remove (10) screws.

Note:

Board ground wires may have to be disconnected to disassemble some boards. All ground wires must be reconnected using

jumper leads if necessary before power is applied to Receiver for service.

TX-47P500HM / TX-47P500HQ / TX-47P500HZ / TX-47P500X