Operating instructions

7
3 Replace the cover.
Do not use rechargeable (Ni-Cd) batteries.
They are different in shape and performance and may fail to ensure correct operation.
The incorrect use of batteries can cause electrolyte leakage which will corrode the Remote Control or cause the
batteries to burst.
Battery cautions
Battery Installation
Old Batteries New Batteries
Replace both batteries at the same time. Don't mix diffrent battery types.
(alkaline with carbon zinc, etc.)
Don't Recharge.
Two “R6 (AA)” size
2
Batteries: Use two “R6 (AA)” size
batteries.
Insert the batteries ensuring the correct
polarities.
This is identifiable by the “+” and “−” symbols
on the batteries and inside the battery
compartment.
Open the cover.
Apply slight downward pressure
while pulling towards the bottom.
1
Before Operating This Set