Operating Instructions
Table Of Contents
- Read first
- Home
- Watching
- Recording
- Media Player
- Network
- Internet content
- Home network
- Network connections
- Network settings
- Network Connection
- Custom - Wireless
- Custom - Wired
- Custom - Wireless Access Point
- Network Status
- TV Name
- TV Remote App Settings
- Network Link Settings
- Smart Speaker Settings
- Mirroring Settings
- Control4 Settings
- VOD Content Refresh
- Software Update
- New Software Message
- IPv6
- Terms of Service and Settings
- Samba Interactive TV Settings
- Photos
- Videos
- Music
- Supported format
- Functions
- Settings
- Support
HDMI HDR Setting
1. Display the menu with MENU, select Main Menu and press OK to access.
2. Select Setup > HDMI HDR Setting and press OK to access.
3. Set the item and press OK to store.
HDR Setting
(Dynamic / Static / Off)
Set to Dynamic or Static when the HDR device is connected to the TV.
●
Please turn Off this function if the image looks unnatural. This may occur
in some cases such as compatibility with the connected device, source
images or with use of multi-window function.
●
Image may disappear for a few seconds when the setting is changed.
●
For HDMI
HDR Dynamic Setting
HDR10+ Functionality
(On / Off)
Enables the HDR10+ function for HDMI input signal.
Dolby Vision
(Mode1 / Mode2 / Off)
Mode1:
Allows Dolby Vision processing to occur either on the TV or the source
device mainly.
Mode2:
Allows Dolby Vision processing to occur mainly on the source device.
Off:
Disables Dolby Vision functionality.
= Note =
●
Supporting HDR does not increase the peak brightness capabilities of the
TV panel.
- 72 -