Operating Instructions
Table Of Contents
- Read first
- Home
- Watching
- Recording
- Media Player
- Network
- Internet content
- Home network
- Network connections
- Network settings
- Network Connection
- Custom - Wireless
- Custom - Wired
- Custom - Wireless Access Point
- Network Status
- TV Name
- TV Remote App Settings
- Network Link Settings
- Smart Speaker Settings
- DVB-via-IP Server Settings
- Mirroring Settings
- Control4 Settings
- VOD Content Refresh
- Software Update
- New Software Message
- IPv6
- Terms of Service and Settings
- Samba Interactive TV Settings
- Photos
- Videos
- Music
- Supported format
- Functions
- Settings
- Support
Recording current programme
One Touch Recording
Records the current programme to the USB HDD immediately.
●
Confirm the remote control code is “73”.
Watching > External equipment > Operating with TV’s remote control
1. Display the menu with MENU, select Main Menu and press OK to access.
2. Select Setup > Recording Setup > One Touch Recording and press OK to
access.
3. Select the maximum recording time 30 / 60 / 90 / 120 / 180 (minutes) and
press OK to set.
■ To start One Touch Recording
Press to start.
●
Other channels cannot be selected while recording is in progress. (Only for
single tuner model)
■ To stop recording in progress
Press to stop.
■ To play back or delete the recorded content
Recorded TV programmes can be played back on Media Player.
1. Display Home with HOME.
2. Select Devices and press OK to access.
3. Select USB HDD for recording and press OK to access.
Media Player > Recorded TV mode
●
Even if One Touch Recording is in progress, you can play back all the
content. (Depending on the USB HDD, playback may not be possible or
the recording may not work properly during playback.)
- 142 -