Operating Instructions

Table Of Contents
DVB-via-IP Server Settings
Only for the model supporting DVB-via-IP server function
Preparations
Ensure the network connections and network settings are completed.
Functions > DVB-via-IP > DVB-via-IP server connection
Network > Network settings
Ensure that Dual Tuner Mode is set to On in LNB Configuration.
Watching > Tuning and editing channels > Auto Setup
DVB-via-IP Server Settings
Selects TV signal and enables tuning in DVB-via-IP server function.
1. Display the menu with MENU, select Main Menu and press OK to access.
2. Select Network > DVB-via-IP Server Settings and press OK to access.
3. Select DVB-S / DVB-C / DVB-T and press OK to set.
Selectable TV modes for client vary depending on the channels stored.
Watching > Tuning and editing channels > Auto Setup
4. Select Enable DVB-via-IP server and press OK to access.
5. A confirmation screen is displayed and press OK to set. (The TV
automatically restarts.)
Changing the default configuration may result in higher energy
consumption of the product.
LED lights orange in Standby mode when this function is active.
= Note =
Dual tuner function (watching or recording 2 programmes simultaneously,
watching a programme while recording another programme, etc.) is not
available while using DVB-via-IP server function.
This function is not available when the TV is turned off with Mains Power
On / Off switch.
Due to network conditions or certain broadcaster restrictions, this function
may not be available.
- 254 -