Contents Safety Information........................................... 1 Maintenance............................................................ 2 Getting Started........................................................ 3 Notifications & Features & Accessories................... 3 Remote Control ...................................................... 6 Connections............................................................ 7 First Time Installation - USB Connections...............
Maintenance First, remove the mains plug from the socket outlet. Display panel, Cabinet, Pedestal Regular care: Gently wipe the surface of the display panel, cabinet, or pedestal by using a soft cloth to clean the dirt or fingerprints. For stubborn dirt: (1) First clean the dust on the surface. (2) Dampen a soft cloth with clean water or diluted neutral detergent (1 part detergent to 100 parts water). (3) Wring the cloth firmly. (Please note that liquids should not enter inside the TV.
Getting Started Notifications & Features & Accessories • Automatic programming system. Environmental Information This television is designed to consume less energy to help save the environment. To reduce energy consumption, you should take the following steps: You can use the Power Save Mode setting, located in the Picture menu. If you set the Power Save Mode as Eco, the TV will switch to energy-saving mode and the luminance level of TV set will be decreased to the optimum level.
To turn the TV off: Press the middle of the button down and hold it down for a few seconds, the TV will turn into standby mode. Operation with the Remote Control Press the MENU button on your remote control to display the main menu screen. Use the “ ” or “ ” buttons to select a menu tab and press the OK button to select option. Use the “ ” or “ ” or “ ” or “ ” buttons to select or set an item. Press BACK/ RETURN, EXIT or MENU button to quit a menu screen.
Specification Authorized Representative: Panasonic Testing Centre Panasonic Marketing Europe GmbH Winsbergring 15, 22525 Hamburg, Germany Web Site: http://panasonic.net TV Broadcasting PAL B/G D/K K I/I’ Receiving Channels VHF (BAND I/III) - UHF (BAND U) - HYPERBAND Digital Reception Fully integrated digital terrestrial-cable. TV(DVB-T-C) Number of Preset Channels 1.000 Channel Indicator On Screen Display RF Aerial Input 75 Ohm (unbalanced) Operating Voltage 220-240V AC, 50Hz.
Getting Started Remote Control 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21.
Getting Started Connections Connector Type Cables Device Scart Connection (back) VGA Connection (back) SIDE AV PC/YPbPr Audio Connection (side) Side Audio/Video Connection Cable (Supplied) PC Audio Cable (Not supplied) HDMI Connection (back) SPDIFF (Coaxial Out) Connection (back) YPBPR YPbPr Video Connection (side) SIDE AV YPbPr Connection Cable (supplied) Side AV (Audio/Video) Connection (side) HEADPHONE AV Connection Cable (supplied) NOTE: When connecting a device via the YPbPr or S i d e A
Getting Started First Time Installation - USB Connections Connect the power cord to the 220-240V AC, 50 Hz. (*) LCN is the Logical Channel Number system that organizes available broadcasts in accordance with a recognizable channel sequence (if available). To switch on the TV from standby mode either: Press MENU button to quit channel list and watch TV. Press the “ ” button, P+ / P- or a numeric button on the remote control.
Loop/Shuffle Mode Operation Start playback with and activate Start playback with OK and activate Start playback with OK/ and activate TV plays next file and loop the list. The same file will be played in a loop (repeat). The file will be played in a shuffle. Option Menu The Option Setup menu allows you to access some options quickly. This menu includes Power Save Mode, Picture Mode, Equalizer Settings, Favourites, Off Timer options. Press OPTION button on the remote control to view the option menu.
TV Menu Features and Functions Picture Menu Contents Mode You can change the picture mode to suit your preference or requirements. Picture mode can be set to one of these options: Cinema, Game, Sports, Dynamic and Natural. Contrast Sets the lightness and darkness values of the screen. Brightness Sets the brightness value for the screen. Sharpness Sets the sharpness value for the objects displayed on the screen. Colour Sets the colour value, adjusting the colors.
Sound Menu Contents Volume Adjusts the volume level. Equalizer Selects the equalizer mode. Custom settings can be made only when in user mode. Balance This setting is used for emphasizing left or right speaker balance. Headphone Sets headphone volume. Please ensure before using headphones that this menu item is set to Headphones. If it is set to Line Output, The output from the headphone socket will be set to maximum which could damage your hearing.
Other Settings: Displays other setting options of the TV set: Menu Timeout Changes timeout duration for menu screens. Scan Encrypted Channels When this setting is on, the search process will locate the encrypted channels as well. Blue Background Activates or deactivates the blue background system when the signal is weak or absent. Software Upgrade To ensure that your TV always has the most up to date firmware. Application Version Displays application version.
General TV Operation Using the Channel List The TV sorts all stored stations in the Channel List. You can edit this channel list, set favourites or set active stations to be listed by using the Channel List options. Configuring Parental Settings To prohibit viewing of certain programmes, channels and menus can be locked by using the parental control system. To display parental lock menu options, the PIN number should be entered. After coding the correct PIN number, parental settings menu will be displayed.
• The picture quality may degrade when two devices are connected to the TV at the same time. In such a case, disconnect one of the devices. No picture • No Picture means that your TV is not receiving a transmission. Have you selected the correct button on the remote control? Try once more. Also make sure the correct input source has been selected.
PC Input Typical Display Modes The following table is an illustration of some of the typical video display modes. Your TV may not support all resolutions.
Supported File Formats for USB Mode Media Extension Format Notes Video .dat, .mpg, .mpeg Mpeg1-2 1080P@30fps, 50Mbit/sec .ts, .trp, .tp, .m2ts MPEG2 , H.264, VC1, AVS, MVC H.264:1080Px2@25fps, 1080P@50fps MVC:1080P@ 24fps Other: 1080P@30fps 50Mbit/sec .vob MPEG2 1080P@30fps 50Mbit/sec .mkv MPEG1-2-4, H.264 H.264:1080Px2@25fps, 1080P@ 50fps, 1080P@30fps, 50Mbit/sec .mp4 MPEG4, XviD, H.264 H.264:1080Px2@25fps, 1080P@ 50fps, 1080P@30fps, 50Mbit/sec .avi MPEG2-4, Xvid, H.264 H.
Supported DVI Resolutions When connecting devices to your TV’s connectors by using DVI converter cable(DVI to HDMI cable - not supplied), you can refer to the following resolution information.
Contenu Consignes de sécurité.................................. 18 Entretien................................................................ 19 Démarrage............................................................ 20 Notifications, Fonctions et Accessoires................. 20 Télécommande ..................................................... 23 Connexions........................................................... 24 Installation initiale- Connexions USB....................
Blessures graves ou risque de Des parties du téléviseur chauffent Avertissement mort ● Même lorsque la température des parties des panneaux etde arrière augmente, Risque avant, supérieur Risque tension dangereuse celle-ci ne représente pas un problème en termes de d'électrocution performances ou de qualité.
Démarrage Notifications, Fonctions et Accessoires Informations sur l'environnement Ce téléviseur est conçu pour consommer moins d'énergie aux fins écologiques. Pour réduire la consommation d'énergie, vous devez respecter les consignes suivantes : Vous pouvez utiliser le Mode Économie d'énergie, dans le menu Image. Si vous définissez le mode Économie d'énergie comme Éco, le téléviseur passera en mode d'économie d'énergie et le niveau de luminosité du téléviseur sera réduit à un niveau optimal.
Les boutons de commande vous permettent de contrôler le volume, le programme, la source et la mise en veille de votre TV. Pour changer le volume : Pour augmenter le volume, appuyez sur le bouton du haut. Pour diminuer le volume, appuyez sur le bouton du bas. Pour changer de chaîne : Appuyer sur la partie centrale du bouton pour faire apparaître à l'écran les informations sur la canal. Parcourrez les chaînes mémorisées en appuyant sur le boutonHaut ou Bas.
Spécifications Diffusion TV PAL B/G D/K K I/I’ Réception des chaînes VHF (BAND I/III) - UHF (BAND U) - HYPERBAND Représentant agréé : Réception numérique TV avec antenne-câblenumériques entièrement intégrés (DVB-T-C) Panasonic Marketing Europe GmbH Nombre de chaînes prédéfinies 1.000 Indicateur de chaîne Affichage à l'écran Entrée d'antenne RF 75 Ohm (déséquilibrée) Tension de fonctionnement 220-240 V AC, 50 Hz.
Démarrage Télécommande 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21.
Démarrage Connexions Connecteur Type Câbles Dispositif Péritel Connexion (arrière) VGA Connexion (arrière) AV LATÉRAL PC/YPbPr Audio Connexion (latéral) Câble de Connexion Latérale Audio/Vidéo (fourni) Câble audio du PC (Non fourni) HDMI Connexion (arrière) SPDIFF (Sortie coaxiale) Connexion (arrière) YPBPR YPbPr Vidéo Connexion (latéral) AV LATÉRAL Câble de connexion YPbPr (fourni) AV latéral (Audio/Vidéo) Connexion (latéral) CASQUE Câble de connexion AV (fourni) Casque Connexion (latéral) U
Démarrage Installation initiale- Connexions USB Installation de l'antenne Mise sous/hors tension Mise sous tension du téléviseur Branchez le cordon d’alimentation à une prise de 220-240 V ~ 50 Hz. Pour allumer le téléviseur à partir du mode veille, vous pouvez soit : • Presser le bouton « », P+/P- ou un bouton numérique sur la télécommande, • Appuyez le commutateur de la fonction côté jusqu’à ce que la TV passe en mode de veille.
et surtout le périphérique USB lui-même. Ne jamais enlever l’USB durant la lecture d’un fichier. Vous pouvez utiliser les concentrateurs USB avec l'entrée USB de téléviseur. Les concentrateurs USB qui sont équipés l'alimentation externe sont recommandés dans ce cas. Nous vous recommandons d'utiliser directement le(s) entrée(s) USB du téléviseur, si vous désirez connecter un disque dur USB.
Options et fonctions du menu TV Contenu du menu Image Mode Vous pouvez modifiez le mode d'image selon vos préférences ou exigences. Le mode Image peut être réglé sur l’une des options suivantes : Cinéma, Jeux, Sports, Dynamique et Naturel. Contraste Règle les valeurs de l’éclairage et de l’obscurité de l’écran. Luminosité Règle la valeur de luminosité de l’écran. Netteté Définit la valeur de netteté des objets affichés à l’écran. Couleur Règle la valeur de la couleur, règle les couleurs.
Contenu du menu Son Volume Ajuste le niveau du volume. Égaliseur Sélectionnez le mode égaliseur. Les paramètres personnalisés ne peuvent être actifs que lorsque vous êtes en mode utilisateur. Balance Ce paramètre s’utilise pour accentuer la balance des haut-parleurs gauche ou droit. Casque Règle le volume du casque. Veuillez vous assurer avant d'utiliser les casques que cet élément du menu est défini en tant que casque.
Autres réglages : Affiche les autres options de réglage du téléviseur : Temporisation du menu Change la durée de temporisation des écrans de menu. Recherche chaînes codées Lorsque ce paramètre est ACTIVÉ, le processus de recherche localisera également les chaînes cryptées. Fond bleu Active ou désactive le système du fond bleu quand le signal est faible ou absent. Mise à niveau du logiciel Pour garantir que votre TV dispose toujours d’informations actualisées.
Fonctionnement général de la TV Utilisation de la liste de chaînes Le téléviseur trie toutes les stations mémorisées dans la liste des chaînes. Vous pouvez modifier cette liste de chaînes, configurer les favoris ou les stations actives à inclure dans la liste en utilisant les options Liste de chaînes. Configuration des paramètres parentaux Pour éviter que certains programmes soient regardés, des chaînes et des menus peuvent être verrouillés grâce au système de contrôle parental.
Résolution des problèmes et astuces La TV ne s’allume pas Assurez-vous que le câble d’alimentation est correctement branché dans la prise murale. Les piles qui se trouvent dans la télécommande peuvent être déchargées. Appuyez sur la touche de mise en marche du téléviseur Mauvaise qualité d’image • Avez-vous sélectionné le système de TV approprié ? • Un signal faible pourrait déformer l’image. Veuillez vérifier le point d’accès de l’antenne.
Modes d’affichage typiques d’une entrée de PC Le tableau ci-après est une illustration de quelques modes d’affichage vidéo typiques. Votre téléviseur ne peut pas prendre en charge toutes les résolutions.
Formats de fichier pris en charge pour le Mode USB Média Extension Format Remarques Vidéo .dat, .mpg, .mpeg Mpeg1-2 1080P@30fps, 50 Mbit/sec .ts, trp, tp, m2ts MPEG2 ,H.264, VC1, AVS, MVC H.264:1080Px2@25fps, 1080P@50fps MVC:1080P@ 24fps Autre : 1080P@30fps - 50Mbit/sec .vob MPEG2 1080P@30fps - 50Mbit/sec .mkv MPEG1-2-4, H.264 H.264:1080Px2@25fps, 1080P@ 50fps, 1080P@30fps, 50 Mbit/sec .mp4 MPEG4, XviD, H.264 H.264:1080Px2@25fps, 1080P@ 50fps, 1080P@30fps, 50 Mbit/sec .
Résolutions DVI prises en charge Reportez-vous aux résolutions suivantes au moment de raccorder des périphériques à votre téléviseur à l’aide des câbles convertisseurs DVI (DVI à HDMI - non fournis).
Indicazioni Note sulla sicurezza...................................... 35 Manutenzione........................................................ 36 Per iniziare............................................................ 37 Notifiche & Caratteristiche & Accessori................. 37 Telecomando ........................................................ 40 Collegamenti......................................................... 41 Prima installazione - Collegamenti USB................
Rischio di gravi lesioni o morteun Il pannello LCD si sposta leggermente ed emette Avvertenza rumore quando viene premuto con un dito ● C’èRischio un piccolo spazio intorno per di shock Rischioal di pannello tensioni pericolose prevenirne il danneggiamento. Ciò non è sintomo di elettrico un malfunzionamento.
Per iniziare Notifiche & Caratteristiche & Accessori Informazioni per la tutela dell'ambiente Questa televisione è progettata per consumare minore energia e salvaguardare l'ambiente. Per ridurre il consumo energetico, attenersi alla seguente procedura: Sarà possibile usare l'impostazione Modalità di Risparmio Energetico, presente nel menu immagine.
L'interruttore di controllo consente di controllare le funzioni di Volume / Programma / Sorgente e StandbyOn della TV. Per modificare il volume: Aumentare il volume premendo il pulsante su. Diminuire il volume premendo il pulsante gi Per cambiare i canali: Premere la parte centrale del pulsante, comparirà a video il banner contenente le informazioni sul canale.
Specifiche Rappresentante autorizzato: Panasonic Testing Centre Panasonic Marketing Europe GmbH Winsbergring 15, 22525 Hamburg, Germany Web Site: http://panasonic.net Trasmissione TV PAL B/G D/K K I/I’ Canali riceventi VHF (BAND I/III) - UHF (BAND U) - HYPERBAND Ricezione digitale TV digitale pienamente integrata TV (DVB-T-C) Numero dei canali pre-impostatiT 1.
Per iniziare Telecomando 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. Televideo Premere il pulsante “TEXT ” per iniziare. Premere nuovamente per attivare la modalità mix. Premere ancora una volta per uscire. Seguire le istruzioni sullo schermo del televideo digitale.
Per iniziare Collegamenti Raccordo Tipo Cavi Dispositivo Scart Collegamento (indietro) VGA Collegamento (indietro) AV LATERALE Audio PC/ YPbPr Collegamento (lato) Cavo di collegamentolaterale Audio/Video(in dotazione) Cavo Audio PC (nonin dotazione) HDMI Collegamento (indietro) SPDIFF (Uscita coassiale) Collegamento (indietro) YPBPR Video YPbPr Collegamento (lato) AV LATERALE Cavo di collegamento YPbPr (in dotazione) AV laterale Audio + Video Collegamento (lato) CUFFIA Cavo di collegamentoAV (
Per iniziare Prima installazione - Collegamenti USB Installazione antenna Accensione/Spegnimento Per accendere la TV Collegare il cavo di alimentazione alla presa da 220240V CA 50 Hz. Per accendere la TV dalla modalità standby è possibile: Premere il tasto “ telecomando. ”, P+ / P- o un tasto numerico del Premere l’interruttore di funzione laterale fino a che la TV non si riaccende dallo standby.
Consigliamo di usare direttamente gli ingressi USB della TV se si prevede di collegare un disco rigido USB. Nota: In fase di visualizzazione di file immagine il Media Browser può visualizzare solo 1000 file immagine salvati sul dispositivo collegato. Tasto Media Player Sarà possibile riprodurre file fotografici, musicali e filmati archiviati in un disco USB collegando il disco alla TV e utilizzando la schermata del browser multimediale. Collegare un disco USB agli appositi ingressi posti al lato della TV.
Caratteristiche e funzioni del menu TV Indice del menu Immagine Modalit Sarà possibile modificare la modalità immagine per soddisfare le proprie preferenze o i propri requisiti. Immagine può essere impostata su una di queste opzioni: Cinema, Gioco, Sport, Dinamicae Naturale. Contrasto Imposta i valori di luminosità e buio dello schermo. Luminosità Imposta il valore di luminosità per lo schermo. Nitidezza Imposta il valore di nitidezza per gli oggetti visualizzati sullo schermo.
Indice menu Audio Volume Regola il livello del volume. Equalizzatore Seleziona la modalità equalizzatore. Le impostazioni personalizzate possono essere fatte solo quando ci si trova in modalità utente. Bilanciamento Questa impostazione si usa per enfatizzare il bilanciamento dell’altoparlante sinistro o destro. Cuffie imposta il volume della cuffia. Prima di usare le cuffie, verificare che questa vode del menu sia impostata sulla voce Cuffie.
Altre impostazioni: visualizza altre opzioni di impostazione della TV: Timeout menu Modifica la durata di timeout per le schermate del menu. Scansione dei canali criptati Quando questa impostazione è attiva, il processo di ricerca localizzerà anche i canali criptati. Sfondo blu Attiva o disattiva il sistema di sfondo blu quando il segnale è debole o assente. Aggiornamento software Assicurarsi che il ricevitore digitale contenga sempre il software più aggiornato.
Funzionamento generale Utilizzo dell'elenco canali La TV ordina tutte le stazioni salvate nell'Elenco dei Canali. Sarà possibile modificare questo elenco dei canali, impostare i canali preferiti o le stazioni attive da elencare servendosi delle opzioni Elenco Canali (Channel List). Configurazione delle impostazioni genitori Per proibire la vista di alcuni problemi, i canali e i menu possono essere bloccati servendosi del sistema di controllo genitori.
Guida alla risoluzione dei problemi e suggerimenti La TV non si accende Accertarsi che il cavo di alimentazione sia saldamente collegato alla presa a parete. Le batterie nel telecomando possono essere scariche. Premere il tasto Power sulla TV oppure Immagine di qualità scadente • E’ stato selezionato il sistema TV corretto? • Il segnale di livello basso può provocare distorsioni dell’immagine.
Modalità tipica monitor - ingresso PC La tabella che segue illustra alcune delle modalità di visualizzazione tipiche del video. La TV potrebbe non supportare tutte le risoluzioni.
Formati di file supportati per la modalità USB Media Estensione Formato Note Video .dat, .mpg, .mpeg Mpeg1-2 1080P@30fps, 50Mbit/sec .ts, .trp, .tp, .m2ts MPEG2 ,H.264, VC1, AVS, MVC H.264:1080Px2@25fps, 1080P@50fps MVC:1080P@ 24fps Altro: 1080P@30fps - 50Mbit/sec .vob MPEG2 1080P@30fps 50Mbit/sec .mkv MPEG1-2-4, H.264 H.264:1080Px2@25fps, 1080P@ 50fps, 1080P@30fps, 50Mbit/sec .mp4 MPEG4, XviD, H.264 H.264:1080Px2@25fps, 1080P@ 50fps, 1080P@30fps, 50Mbit/sec .avi MPEG2-4, Xvid, H.
Risoluzioni DVI supportate Se si collegano dei dispositivi ai connettori della TV utilizzando cavi di conversione DVI (non in dotazione), e possibile fare riferimento alle seguenti informazioni sulla risoluzione.
Obsah Bezpečnostné pokyny................................... 52 Údržba................................................................... 53 Začíname.............................................................. 54 Notifikácie & Funkcie & Príslušenstvo................... 54 Diaľkový ovládač .................................................. 57 Pripojenia.............................................................. 58 Prvá inštalácia - USB pripojenia............................
Riziko vážneho zranenia alebo LCDUpozornenie panel sa trochu hýbe a je počuť rachotivý zvuk, smrti keď ho potlačíte prstom ● Aby sa zabránilo poškodeniu panela, je okolo neho Riziko zranenia Riziko nebezpečného napätia malá medzera. elektrickým prúdom Nejde o poruchu. Riziko zranenia alebo poškodenia Objaví sa hlásenie o chybe preťaženia Výstraha majetku ● Túto chybu môže spôsobovať pripojené zariadenie Prevádzkujte systém správne sDôležité rozhraním USB.
Začíname Notifikácie & Funkcie & Príslušenstvo Informácie o ochrane životného prostredia Táto televízor je navrhnutý tak, aby spotreboval menej energie, čím šetrí životné prostredie. Pre zníženie spotreby energie by ste mali podniknúť nasledujúce kroky: Môžete použiť nastavenie úsporného režimu, ktorý sa nachádza v ponuke Obraz. Ak nastavíte Režim šetrenia energie na Eco, televízor prejde na energeticky úsporný režim a úroveň jasu televízora sa zníži na optimálnu úroveň.
Ak chcete zmeniť hlasitosť: Zvýšte hlasitosť stlačením tlačidla nahor. Znížte hlasitosť stlačením tlačidla dole. Ak chcete zmeniť Kanál: Stlačte stred tlačidla, na obrazovke sa objaví informačný banner o kanáli. Prechádzajte uložené kanály stlačením tlačidla nahor alebo nadol. Ak chcete zmeniť zdroj: Stlačte stred tlačidla dvakrát, na obrazovke sa objaví zoznam zdrojov. Prechádzajte dostupné zdroje stlačením tlačidla nahor alebo nadol.
Technické parametre Autorizovaný zástupca: Panasonic Testing Centre Panasonic Marketing Europe GmbH Winsbergring 15, 22525 Hamburg, Germany Web Site: http://panasonic.net TV vysielanie PAL B/G D/K K I/I' Prijímanie kanálov VHF (BAND I/III) - UHF (BAND U) - HYPERBAND Digitálny príjem Plne integrovaná podpora digitálnej terestriálnejkáblovej televízie (DVB-T-C). Počet prednastavených kanálov 1.
Začíname Diaľkový ovládač 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21.
Začíname Pripojenia Prípojka Typ Káble Zariadenie Scart Pripojenie (zadná strana) VGA Pripojenie (zadná strana) BOČNÉ-AV PC/YPbPr Audio Pripojenie (bočné) Bočný Audio / Video prípojný kábel (súčasť dodávky) PC Audio kábel (nie je súčasťou dodávky) HDMI Pripojenie (zadná strana) SPDIFF (Koaxiálny výstup) Pripojenie (zadná strana) YPBPR YPbPr Video Pripojenie (bočné) BOČNÉ-AV AV prípojný kábel (súčasť dodávky) Bočné AV (Audio/Video) Pripojenie (bočné) SLÚCHADLÁ YPbPr prípojný kábel (súčasť dodáv
Začíname Prvá inštalácia - USB pripojenia Zatiaľ čo prebieha hľadanie, zobrazí sa správa s otázkou, či chcete triediť kanály podľa LCN (*). Zvoľte ANO a stlačte tlačidlo OK pre pokračovanie. Zapnutie/Vypnutie Zapnutie televízora Pripojte napájací kábel k 220-240 V AC, 50 Hz Zapnutie televízora z pohotovostného režimu: Na diaľkovom ovládači stlačte tlačidlo číselné tlačidlo. ”, P+ / P- alebo Stlačte bočný spínač funkcií, pokým sa TV zapne z pohotovostného režimu.
Ponuka Media Player Môžete prehrávať fotografie, hudbu a video súbory uložené na USB disku jeho pripojením k televízoru a pomocou obrazovky prehliadača médií. Pripojte USB disk k jednému z USB vstupov umiestnených na bočnej strane televízora. Stláčaním tlačidla Menu počas režimu Prehliadač médií sa umožní prístup k možnostiam menu Obraz, Zvuk a Nastavenia. Po opätovnom stlačení tlačidla MENU opustíte túto obrazovku. Pomocou Ponuky Nastavenie si môžete nastaviť preferencie mediálneho prehrávača Media Player.
Menu Vlastnosti a Funkcie TV Obsah obrazového menu Režim Môžete zmeniť režim obrazu pre zhodu s vašimi preferenciami alebo požiadavkami. Režim obrazu je možné nastaviť na jednu z týchto možností: Kino, Hry, Športy, Dynamické a Prirodzené. Kontrast Nastaví hodnoty svetlosti a tmavosti obrazovky. Jas Nastaví hodnotu jasu obrazovky. Ostrosť Nastaví hodnotu ostrosti pre predmety zobrazené na obrazovke. Farba Nastaví hodnotu farieb, nastaví farby.
Obsah ponuky Nastavenie zvuku Hlasitosť Nastaví úroveň hlasitosti. Režim Ekvalizéra Zvolí režim ekvalizéra. Užívateľské nastavenia sa môžu vykonať len v užívateľskom režime. Rovnováha Toto nastavenie slúži na zvýraznenie ľavého alebo pravého zvukového kanálu. Slúchadlá Nastaví hlasitosť slúchadiel. Pred použitím slúchadiel sa prosím uistite, že táto položka je v menu nastavená na Slúchadlá.
Iné nastavenia: Zobrazí iné možnosti nastavenia televízora: Časový limit ponuky Zmení trvanie časového limitu pre obrazovky ponuky. Skenovať kódované kanály Keď je toto nastavenie zapnuté, pomocou procesu vyhľadávania sa zistia tiež kódované kanály. Modré pozadie Aktivuje alebo deaktivuje modré pozadie systému, keď je signál slabý alebo neprítomný. Aktualizácia softvéru Pre zabezpečenie, aby mal váš TV stále ten najaktuálnejší firemný softvér. Verzia aplikácie Zobrazí verziu aplikácie.
Všeobecná prevádzka TV Použitie Zoznamu staníc Televízor roztriedi všetky uložené stanice do Zoznamu kanálov. Tento zoznam kanálov môžete upraviť, nastaviť si obľúbené alebo aktívne stanice, ktoré sa majú uviesť, a to pomocou možností v Zozname staníc. Konfigurácia Rodičovskej ochrany Ak chcete zakázať pozeranie určitých programov, kanálov a ponúk, môžete ich uzamknúť pomocou systému rodičovskej kontroly. Ak chcete zobraziť možnosti rodičovskej zámky, musíte zadať PIN kód.
• Skontrolujte, či ste zadali správnu frekvenciu kanála, ak ste vykonali ručné ladenie. • Kvalita obrazu sa môže zhoršiť, ak sú dve zariadenia pripojené k televízoru súčasne. V takom prípade odpojte jedno zo zariadení. Žiadny obraz • Ak nemáte žiadny obraz, znamená to, že televízor neprijíma žiadny signál. Vybrali ste správne tlačidlo na diaľkovom ovládači? Skúste to ešte raz. Uistite sa taktiež, že bol vybratý správny zdroj vstupu.
Typické režimy zobrazenia PC vstupu Nasledujúca tabuľka uvádza niektoré typické režimy obrazu. Televízor nemusí podporovať všetky rozlíšenia.
Podporované formáty súborov v režime USB Médiá Rozšírenie Formát Poznámky Video .dat, .mpg, .mpeg Mpeg1-2 1080P@30fps, 50Mbit/sec .ts, .trp, .tp, .m2ts MPEG2 , H.264, VC1, AVS, MVC H.264:1080Px2@25fps, 1080P@50fps MVC:1080P@ 24fps Ostatné: 1080P@30fps - 50Mbit/s .vob MPEG2 1080P@30fps 50Mbit/s .mkv MPEG1-2-4, H.264 H.264:1080Px2@25fps, 1080P@ 50fps, 1080P@30fps, 50Mbit/s .mp4 MPEG4, XviD, H.264 H.264:1080Px2@25fps, 1080P@ 50fps, 1080P@30fps, 50Mbit/s .avi MPEG2-4, Xvid, H.264 H.
Podporované rozlíšenia DVI Pri pripájaní zariadení ku konektorom televízora pomocou adaptérového DVI kábla (DVI do HDMI kábel) (nie je súčasťou balenia), sa môžete odvolať na nasledujúce informácie o rozlíšeniach.
Slovenčina - 69 - Product fiche TX-32A300B Panasonic Corporation A+ TX-50A300E TX-32A300B TX-L39BLW6 80 cmTX-32A300B / A++ 32A+ inches A+ 34/ /W A+ 127 cm /39 50 inches 80cm cm 32 inches 98 inches kWh 8047 cm /WW 32 inches 71 W 34 34 0.20 W 103 34 W 47kWh kWh 47 kWh 0.20 W <0,5 W 47 kWh 0.20 W 0.20 W 1,366 (W) × 768 NA 0.20 0.20 0.
Lietuvių k.