Operating Instructions
- 70 -
●
To rename the channel name (Analogue)
1) Press
(blue) to edit.
2) Enter characters (maximum 5 characters) with
/ / / or
Numeric buttons, and press OK to set.
3) Press BACK/RETURN to store.
= Note =
●
If a VCR is connected only with the RF cable in Analogue, edit VCR.
Auto Setup
Automatically retunes the channels received in the area.
●
This function is available if channel tuning is already performed.
●
Only the selected mode is retuned. All the previous tuning settings are
erased.
●
If Child Lock PIN number has been set, the PIN number is required.
Functions > Child Lock > PIN number
●
If tuning has not been done completely, set Manual Tuning.
Watching > Tuning and editing channels > Manual Tuning