Contents Safety Information........................................... 1 Maintenance............................................................ 2 Getting Started........................................................ 3 Notifications & Features & Accessories................... 3 Remote Control ...................................................... 6 Connections............................................................ 7 First Time Installation - USB Connections...............
Maintenance First, remove the mains plug from the socket outlet. Display panel, Cabinet, Pedestal Regular care: Gently wipe the surface of the display panel, cabinet, or pedestal by using a soft cloth to clean the dirt or fingerprints. For stubborn dirt: (1) First clean the dust on the surface. (2) Dampen a soft cloth with clean water or diluted neutral detergent (1 part detergent to 100 parts water). (3) Wring the cloth firmly. (Please note that liquids should not enter inside the TV.
Getting Started Notifications & Features & Accessories • Automatic programming system. Environmental Information This television is designed to consume less energy to help save the environment. To reduce energy consumption, you should take the following steps: You can use the Power Save Mode setting, located in the Picture menu. If you set the Power Save Mode as Eco, the TV will switch to energy-saving mode and the luminance level of TV set will be decreased to the optimum level.
Scroll through the stored channels by pushing the button up or down To change source: Press the middle of the button twice, the source list will appear on screen. Scroll through the available sources by pushing the button up or down. To turn the TV off: Press the middle of the button down and hold it down for a few seconds, the TV will turn into standby mode. Operation with the Remote Control Press the MENU button on your remote control to display the main menu screen.
Specification Authorized Representative: Panasonic Testing Centre Panasonic Marketing Europe GmbH Winsbergring 15, 22525 Hamburg, Germany TV Broadcasting PAL B/G D/K K I/I’ Receiving Channels VHF (BAND I/III) - UHF (BAND U) - HYPERBAND Digital Reception Fully integrated digital terrestrial-cable-satellite TV(DVB-T-C-S) (DVB-S2 compliant) Web Site: http://panasonic.net (DVB-T2 compliant) Number of Preset Channels 10.
Getting Started Remote Control 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21.
Getting Started Connections Connector Type Cables Device Scart Connection (back) VGA Connection (back) SIDE AV PC/YPbPr Audio Connection (side) Side Audio/Video Connection Cable (Supplied) PC Audio Cable (Not supplied) HDMI Connection (back) SPDIFF (Coaxial Out) Connection (back) YPBPR YPbPr Video Connection (side) SIDE AV YPbPr Connection Cable (supplied) Side AV (Audio/Video) Connection (side) HEADPHONE AV Connection Cable (supplied) NOTE: When connecting a device via the YPbPr or S i d e A
Getting Started First Time Installation - USB Connections Aerial Installation To Switch the TV On Connect the power cord to the 220-240V AC, 50 Hz. Switch the “ ” button on the rear left hand side to position “|” so the TV will switch to standby mode. Then the standby LED lights up. To switch on the TV from standby mode either: Press the “ ” button, P+ / P- or a numeric button on the remote control. Press the control switch located on the left side of the TV. The TV will then switch on.
Using SatcoDX Feature SatcoDX (optional): You can perform SatcoDX operations using the Satelite Settings menu. In the SatcoDX menu, there are two options regarding to the SatcoDx. You can download or upload SatcoDX data. In order to perform these functions a USB device must be connected to the TV. You can upload current services and related satellites & transponders in TV, to a USB device. Additionally you can download one of the SatcoDx files stored in USB device, to the TV.
TV Menu Features and Functions Picture Menu Contents Mode You can change the picture mode to suit your preference or requirements. Picture mode can be set to one of these options: Cinema, Game, Sports, Dynamic and Natural. Contrast Sets the lightness and darkness values of the screen. Brightness Sets the brightness value for the screen. Sharpness Sets the sharpness value for the objects displayed on the screen. Colour Sets the colour value, adjusting the colors.
Sound Menu Contents Volume Adjusts the volume level. Equalizer Selects the equalizer mode. Custom settings can be made only when in user mode. Balance This setting is used for emphasizing left or right speaker balance. Headphone Sets headphone volume. Please ensure before using headphones that this menu item is set to Headphones. If it is set to Line Output, The output from the headphone socket will be set to maximum which could damage your hearing.
Other Settings: Displays other setting options of the TV set: Menu Timeout Changes timeout duration for menu screens. Scan Encrypted Channels When this setting is on, the search process will locate the encrypted channels as well. Blue Background Activates or deactivates the blue background system when the signal is weak or absent. Software Upgrade To ensure that your TV always has the most up to date firmware. Application Version Displays application version.
General TV Operation Using the Channel List The TV sorts all stored stations in the Channel List. You can edit this channel list, set favourites or set active stations to be listed by using the Channel List options. Configuring Parental Settings To prohibit viewing of certain programmes, channels and menus can be locked by using the parental control system. To display parental lock menu options, the PIN number should be entered. After coding the correct PIN number, parental settings menu will be displayed.
• The picture quality may degrade when two devices are connected to the TV at the same time. In such a case, disconnect one of the devices. No picture • No Picture means that your TV is not receiving a transmission. Have you selected the correct button on the remote control? Try once more. Also make sure the correct input source has been selected.
PC Input Typical Display Modes The following table is an illustration of some of the typical video display modes. Your TV may not support all resolutions.
Supported File Formats for USB Mode Media Extension Format Notes Video .dat, .mpg, .mpeg Mpeg1-2 1080P@30fps, 50Mbit/sec .ts, .trp, .tp, .m2ts MPEG2 , H.264, VC1, AVS, MVC H.264:1080Px2@25fps, 1080P@50fps MVC:1080P@ 24fps Other: 1080P@30fps 50Mbit/sec .vob MPEG2 1080P@30fps 50Mbit/sec .mkv MPEG1-2-4, H.264 H.264:1080Px2@25fps, 1080P@ 50fps, 1080P@30fps, 50Mbit/sec .mp4 MPEG4, XviD, H.264 H.264:1080Px2@25fps, 1080P@ 50fps, 1080P@30fps, 50Mbit/sec .avi MPEG2-4, Xvid, H.264 H.
Supported DVI Resolutions When connecting devices to your TV’s connectors by using DVI converter cable(DVI to HDMI cable - not supplied), you can refer to the following resolution information.
Contenu Consignes de sécurité.................................. 18 Entretien................................................................ 19 Démarrage............................................................ 20 Notifications, Fonctions et Accessoires................. 20 Télécommande ..................................................... 23 Connexions........................................................... 24 Installation initiale- Connexions USB....................
Blessures graves ou risque de Des parties du téléviseur chauffent Avertissement mort ● Même lorsque la température des parties des panneaux etde arrière augmente, Risque avant, supérieur Risque tension dangereuse celle-ci ne représente pas un problème en termes de d'électrocution performances ou de qualité.
Démarrage Notifications, Fonctions et Accessoires Informations sur l'environnement Ce téléviseur est conçu pour consommer moins d'énergie aux fins écologiques. Pour réduire la consommation d'énergie, vous devez respecter les consignes suivantes : Vous pouvez utiliser le Mode Économie d'énergie, dans le menu Image. Si vous définissez le mode Économie d'énergie comme Éco, le téléviseur passera en mode d'économie d'énergie et le niveau de luminosité du téléviseur sera réduit à un niveau optimal.
Les boutons de commande vous permettent de contrôler le volume, le programme, la source et la mise en veille de votre TV. Pour changer le volume : Pour augmenter le volume, appuyez sur le bouton du haut. Pour diminuer le volume, appuyez sur le bouton du bas. Pour changer de chaîne : Appuyer sur la partie centrale du bouton pour faire apparaître à l'écran les informations sur la canal. Parcourrez les chaînes mémorisées en appuyant sur le boutonHaut ou Bas.
Informations pour les utilisateurs en matière de mise au rebut des appareils et des piles désuets [Union européenne uniquement] Ces symboles indiquent que cet appareil ne doit pas être éliminé avec les déchets ménagers. Si vous souhaitez vous débarrasser du produit ou de la pile, veuillez prendre en compte les systèmes ou les outils de collecte pour un recyclage approprié. Représentant agréé : Remarque : La marque Pb en dessous du symbole des piles indique que cette pile contient du plomb.
Démarrage Télécommande 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21.
Démarrage Connexions Connecteur Type Câbles Dispositif Péritel Connexion (arrière) VGA Connexion (arrière) AV LATÉRAL PC/YPbPr Audio Connexion (latéral) Câble de Connexion Latérale Audio/Vidéo (fourni) Câble audio du PC (Non fourni) HDMI Connexion (arrière) SPDIFF (Sortie coaxiale) Connexion (arrière) YPBPR YPbPr Vidéo Connexion (latéral) AV LATÉRAL Câble de connexion YPbPr (fourni) AV latéral (Audio/Vidéo) Connexion (latéral) CASQUE Câble de connexion AV (fourni) Casque Connexion (latéral) U
Démarrage Installation initiale- Connexions USB Mise sous/hors tension Mise sous tension du téléviseur • Branchez le cordon d’alimentation à une prise de 220-240 V AC, 50 Hz. • Positionnez la touche « » sur le côté arrière gauche afin que le téléviseur passe au mode de veille «|». Le TÉMOIN de mise en veille s’allume. Pour allumer le téléviseur à partir du mode veille, vous pouvez soit : Presser le bouton « », P+ / P- ou un bouton numérique sur la télécommande.
Sélectionnez un satellite disponible et appuyez sur OK pour rechercher les chaînes disponibles. Unicâble : Si vous avez de multiples récepteurs et un système unicâble, ce type d’antenne est celui que vous devez sélectionner. Appuyez sur la touche OK pour continuer. Configurez les paramètres en suivant les indications données à l’écran. Appuyez sur la touche OK pour rechercher les chaînes disponibles.
Options et fonctions du menu TV Contenu du menu Image Mode Vous pouvez modifiez le mode d'image selon vos préférences ou exigences. Le mode Image peut être réglé sur l’une des options suivantes : Cinéma, Jeux, Sports, Dynamique et Naturel. Contraste Règle les valeurs de l’éclairage et de l’obscurité de l’écran. Luminosité Règle la valeur de luminosité de l’écran. Netteté Définit la valeur de netteté des objets affichés à l’écran. Couleur Règle la valeur de la couleur, règle les couleurs.
Contenu du menu Son Volume Ajuste le niveau du volume. Égaliseur Sélectionnez le mode égaliseur. Les paramètres personnalisés ne peuvent être actifs que lorsque vous êtes en mode utilisateur. Balance Ce paramètre s’utilise pour accentuer la balance des haut-parleurs gauche ou droit. Casque Règle le volume du casque. Veuillez vous assurer avant d'utiliser les casques que cet élément du menu est défini en tant que casque.
Autres réglages : Affiche les autres options de réglage du téléviseur : Temporisation du menu Change la durée de temporisation des écrans de menu. Recherche chaînes codées Lorsque ce paramètre est ACTIVÉ, le processus de recherche localisera également les chaînes cryptées. Fond bleu Active ou désactive le système du fond bleu quand le signal est faible ou absent. Mise à niveau du logiciel Pour garantir que votre TV dispose toujours d’informations actualisées.
Fonctionnement général de la TV Utilisation de la liste de chaînes Le téléviseur trie toutes les stations mémorisées dans la liste des chaînes. Vous pouvez modifier cette liste de chaînes, configurer les favoris ou les stations actives à inclure dans la liste en utilisant les options Liste de chaînes. Configuration des paramètres parentaux Pour éviter que certains programmes soient regardés, des chaînes et des menus peuvent être verrouillés grâce au système de contrôle parental.
Résolution des problèmes et astuces La TV ne s’allume pas Assurez-vous que le câble d’alimentation est correctement branché dans la prise murale. Les piles qui se trouvent dans la télécommande peuvent être déchargées. Appuyez sur la touche de mise en marche du téléviseur Mauvaise qualité d’image • Avez-vous sélectionné le système de TV approprié ? • Un signal faible pourrait déformer l’image. Veuillez vérifier le point d’accès de l’antenne.
Modes d’affichage typiques d’une entrée de PC Le tableau ci-après est une illustration de quelques modes d’affichage vidéo typiques. Votre téléviseur ne peut pas prendre en charge toutes les résolutions.
Formats de fichier pris en charge pour le Mode USB Média Extension Format Remarques Vidéo .dat, .mpg, .mpeg Mpeg1-2 1080P@30fps, 50 Mbit/sec .ts, trp, tp, m2ts MPEG2 ,H.264, VC1, AVS, MVC H.264 :1080Px2@25fps, 1080P@50fps MVC :1080P@ 24fps Autre : 1080P@30fps - 50Mbit/sec .vob MPEG2 1080P@30fps - 50Mbit/sec .mkv MPEG1-2-4, H.264 H.264 :1080Px2@25fps, 1080P@ 50fps, 1080P@30fps, 50 Mbit/sec .mp4 MPEG4, XviD, H.264 H.264 :1080Px2@25fps, 1080P@ 50fps, 1080P@30fps, 50 Mbit/sec .
Résolutions DVI prises en charge Reportez-vous aux résolutions suivantes au moment de raccorder des périphériques à votre téléviseur à l’aide des câbles convertisseurs DVI (DVI à HDMI - non fournis).
Inhalt Sicherheitsinformationen.............................. 35 Pflege und Instandhaltung..................................... 36 Erste Schritte......................................................... 37 Meldungen & Eigenschaften & Zubehör................ 37 Fernbedienung ..................................................... 40 Anschlüsse............................................................ 41 Erste Installation.................................................... 42 TV Menü Funktionen.............
hinweisen, dass dies die Leistung oder Funktionsfähigkeit Produktsaufaber Ein ungewöhnliches Ihres Bild erscheint dem in keiner Bildschirm Weise beeinträchtigt. Achten Sie darauf, den Bildschirm mitden den Fingernägeln oder anderen ● Schalten Sie Netzschalter des Fernsehers einmal aus und dann wieder ein. harten Gegenständen nicht zu zerkratzen. ● Falls die weiterhindes besteht, setzen Sie • Ziehen SieStörung vor derauch Reinigung Fernsehers den alle Einstellungen Netzstecker aus derzurück. Steckdose.
Erste Schritte Meldungen & Eigenschaften & Zubehör Umweltinformationen Dieses TV-Gerät wurde so konstruiert, dass es die Umwelt schützt und weniger Energie verbraucht. Um den Energieverbrauch zu senken, gehen Sie wie folgt vor: Sie können die Einstellung Energiesparmodus im Menü Bildeinstellungen verwenden. Wenn Sie den Energiesparmodus (Eco) verwenden, wechselt das TV-Gerät in den Energiesparmodus; dadurch wird die Leuchtstärke des TV-Gerätes auf einen optimalen Pegel reguliert.
Kanäle wechseln und Lautstärke ändern Sie können mit den Tasten V+/- und P+/- auf der Fernbedienung den Kanal wechseln und die Lautstärke einstellen. TV-Bedientasten & Betrieb (Standby Switch) Der “ ”, -Schalter dient zum Ein- und Ausschalten des TV-Geräts. 1. Nach oben 2. Nach unten 3. Programm/Lautstärke/AV/Standby-Schalter Der Kontrol-Schalter ermöglicht Ihnen die Lautstärke / Programme / Quellen und Standby-Ein-Funktionen des Fernsehers zu steuern.
Technische Daten Meldung Hergestellt unter der Lizenz der Dolby Laboratories. MARKENZEICHEN “Dolby” und das Doppel-D-Symbol sind Warenzeichen der Dolby Laboratories. "HDMI, das HDMI-Logo und High-Definition Multimedia Interface sind Markenzeichen oder eingetragene Markenzeichen der HDMI Licensing LLC." Benutzerinformationen zur Entsorgung von Altgeräten und Batterien [Nur Europäische Gemeinschaft] Diese Symbole geben an, dass ein Gerät mit diesen Symbolen nicht als normaler Hausmüll entsorgt werden darf.
Erste Schritte Fernbedienung 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21.
Erste Schritte Anschlüsse Stecker Typ Kabel Gerät SCART Verbindung (Rückseite) VGA Verbindung (Rückseite) SEITEN AV PC, YPBPR, Audio Verbindung (Seite) Audio/VideoAnschlusskabel (Seiteneingang) (mitgeliefert) PC-Audio-Kabel (nicht mitgeliefert) HDMI Verbindung (Rückseite) SPDIFF (Koaxialausgang) Verbindung (Rückseite) YPBPR YPbPr-Video Verbindung (Seite) SEITEN AV YPbPr -Anschlusskabel (nicht mitgeliefert Seiten-AV Audio / Video Verbindung (Seite) KOPFHÖRER AV-Anschlusskabel (mitgeliefert) Ko
Erste Schritte Erste Installation Um das TV-Gerät einzuschalten Schließen Sie das Netzkabel an ein 220-240V ACNetz mit 50 Hz an. Bringen Sie den Schalter “ ” in die Position “|”, und das Gerät schaltet automatisch in den StandbyModus. Die Standby-LED leuchtet auf. Um das TV-Gerät aus dem Standby einzuschalten: Drücken Sie die Taste “ ”, P+/P- oder eine Zifferntaste auf der Fernbedienung. Drücken Sie auf die Steuerschalters auf der linken Seite des TV-Geräts. Das TV-Gerät schaltet sich ein.
indem Sie den Anweisungen am Bildschirm folgen. Drücken Sie OK, um nach dem Dienst zu suchen. DiSEqC-Schalter:Wählen Sie diesen Antennentyp, wenn Sie mehrere Satellitenantennen und einen DiSEqC-Schalter verwenden. Nach der Auswahl des DiSEqC-Schalters erscheint ein weiterer Menübildschirm angezeigt werden. Sie können vier DiSEqC Optionen (sofern verfügbar) einstellen.
TV Menü Funktionen Bilder Menü Inhalt Modus Sie können den Bildmodus ändern, um ihn nach Ihren Wünschen oder Anforderungen anzupassen. Der Bildmodus kann auf eine dieser Optionen eingestellt werden: Kino, Spiel, Sport , Dynamisch und Natürlich. Kontrast Stellt die Kontrastwerte des Bildschirms ein. Helligkeit Stellt die Helligkeit des Bildschirms ein. Schärfe Stellt die Schärfe der Bildschirmdarstellung ein. Farbe Stellt die Farbsättigung ein und verändert die Farben.
Inhalt des Tonmenüs Lautstärke Stellt die Lautstärke ein. Equalizer Wählt den Equalizer-Modus. Benutzerdefinierte Einstellungen können nur im Benutzer-Modus vorgenommen werden. Balance Diese Einstellung wird dazu benutzt, um die Lautstärke des rechten oder linken Lautsprechers einzeln einzustellen. Kopfhörer Stellt die Lautstärke für den Kopfhörer ein. Bevor Sie einen Kopfhörer benutzen, vergewissern Sie sich, dass dieser Menüpunkt auf Kopfhörer eingestellt ist.
Weitere Einstellungen: Zeigt weitere Einstellungsoptionen für das TV-Gerät an. Menü Timeout Verändert die Timeout-Zeit zwischen den Menübildschirmen. Verschlüsselte Kanäle suchen Wenn diese Einstellung gesetzt ist, werden beim Suchvorgang auch die verschlüsselten Kanäle gesucht. Blauer Hintergrund Aktiviert oder deaktiviert den blauen Hintergrund bei schwachem oder fehlendem Signal. Softwareaktualisierung Diese Funktion stellt sicher, dass Ihr TV-Gerät immer auf dem neuesten Stand ist.
Allgemeine Bedienung Verwendung der Senderliste Das Gerät sortiert alle gespeicherten Sender in eine Senderliste. Mit den Kanalllistenoptionen können Sie die Liste verändern, Lieblingssender hervorheben oder aktive Stationen hinzufügen. Jugendschutzeinstellungen Mit der Elternkontrolle können Sie das Ansehen bestimmter Programme, Sender oder Menüs verhindern. Um die Jugendschutz-Menüoptionen anzuzeigen, muss die PIN eingegeben werden.
Fehlerbehebung & Tipps Das TV-Gerät schaltet sich nicht ein Vergewissern Sie sich, dass das Netzkabel in die Steckdose eingesteckt ist und die Batterien der Fernbedienung noch funktionieren. Drücken Sie das Einschaltrad am Fernsehgerät, sollte der Fernseher nicht auf die Fernbedienung reagieren. Schlechte Bildqualität • Haben Sie die richtige Farbnorm ausgewählt? • Niedriger Signalpegel kann Bildverzerrungen verursachen. • Überprüfen Sie, ob die richtige Frequenz eingegeben ist.
Typische Anzeigemodi PC-Eingang In der folgenden Tabelle werden einige der üblichen Video-Display-Modi dargestellt. Unter Umständen unterstützt Ihr TV keine unterschiedlichen Auflösungen.
Beim USB-Modus unterstützte Dateiformate Medium Erweiterung Format Hinweise Video .dat, .mpg, .mpeg Mpeg1-2 1080P@30fps, 50Mbit/sec .ts, .trp, .tp, .m2ts MPEG2 ,H.264, VC1, AVS, MVC H.264:1080Px2@25fps, 1080P@50fps MVC:1080P@ 24fps Andere: 1080P@30fps - 50Mbit/sec .vob MPEG2 1080P@30fps 50Mbit/sec .mkv MPEG1-2-4, H.264 H.264:1080Px2@25fps, 1080P@ 50fps, 1080P@30fps, 50Mbit/sec .mp4 MPEG4, XviD, H.264 H.264:1080Px2@25fps, 1080P@ 50fps, 1080P@30fps, 50Mbit/sec .avi MPEG2-4, Xvid, H.
Unterstützte DVI-Auflösungen Wenn Sie Zusatzgeräte über DVI-HDMI-Adapterkabel (nicht mitgeliefert) an die Anschlüsse Ihres TV-Gerätes anschließen, können Sie sich an die folgenden Auflösungsinformationen halten: 56Hz 60Hz 66Hz þ þ 640x400 72Hz 75Hz þ 640x480 800x600 70Hz þ þ þ þ þ þ þ þ þ þ 832x624 þ 1024x768 þ 1152x864 þ þ 1152x870 þ þ þ 1280x768 þ 1360x768 þ þ 1280x960 þ þ 1280x1024 þ þ 1400x1050 þ þ 1440x900 þ þ 1600x1200 þ 1680x1050 þ 1920x1080 þ 192
Indicazioni Note sulla sicurezza...................................... 52 Manutenzione........................................................ 53 Per iniziare............................................................ 54 Notifiche & Caratteristiche & Accessori................. 54 Telecomando ........................................................ 57 Collegamenti......................................................... 58 Prima installazione - Collegamenti USB................
Rischio di gravi lesioni o morteun Il pannello LCD si sposta leggermente ed emette Avvertenza rumore quando viene premuto con un dito ● C’èRischio un piccolo spazio intorno per di shock Rischioal di pannello tensioni pericolose prevenirne il danneggiamento. Ciò non è sintomo di elettrico un malfunzionamento.
Per iniziare Notifiche & Caratteristiche & Accessori Informazioni per la tutela dell'ambiente Questa televisione è progettata per consumare minore energia e salvaguardare l'ambiente. Per ridurre il consumo energetico, attenersi alla seguente procedura: Sarà possibile usare l'impostazione Modalità di Risparmio Energetico, presente nel menu immagine.
L'interruttore di controllo consente di controllare le funzioni di Volume / Programma / Sorgente e StandbyOn della TV. Per modificare il volume: Aumentare il volume premendo il pulsante su. Diminuire il volume premendo il pulsante gi Per cambiare i canali: Premere la parte centrale del pulsante, comparirà a video il banner contenente le informazioni sul canale.
Specifiche Rappresentante autorizzato: Panasonic Testing Centre Panasonic Marketing Europe GmbH Winsbergring 15, 22525 Hamburg, Germany Trasmissione TV PAL B/G D/K K I/I’ Canali riceventi VHF (BAND I/III) - UHF (BAND U) - HYPERBAND Ricezione digitale TV digitale pienamente integrata TV(DVB-T-C-S) Web Site: http://panasonic.net (Conforme a DVB-S2) (Conforme a DVB-T2) Numero dei canali pre-impostatiT 10.
Per iniziare Telecomando 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. Televideo Premere il pulsante “TEXT ” per iniziare. Premere nuovamente per attivare la modalità mix. Premere ancora una volta per uscire. Seguire le istruzioni sullo schermo del televideo digitale.
Per iniziare Collegamenti Raccordo Tipo Cavi Dispositivo Scart Collegamento (indietro) VGA Collegamento (indietro) AV LATERALE Audio PC/ YPbPr Collegamento (lato) Cavo di collegamentolaterale Audio/Video(in dotazione) Cavo Audio PC (nonin dotazione) HDMI Collegamento (indietro) SPDIFF (Uscita coassiale) Collegamento (indietro) YPBPR Video YPbPr Collegamento (lato) AV LATERALE Cavo di collegamento YPbPr (in dotazione) AV laterale Audio + Video Collegamento (lato) CUFFIA Cavo di collegamentoAV (
Per iniziare Prima installazione - Collegamenti USB Installazione antenna Accensione/Spegnimento Per accendere la TV Collegare il cavo di alimentazione alla presa da 220240V CA 50 Hz. Portare il tasto “ ” sul lato destro inferiore nella schermata in posizione “|” di modo che la TV entri in modalità standby. Il LED di standby si illumina. Per accendere la TV dalla modalità di standby è possibile: Premere il tasto " telecomando.
eseguire una ricerca di tutti i satelliti o il tasto GIALLO per eseguire una scansione unicamente sul satellite evidenziato. Per salvare e uscire premere il tasto OK . Nota: Non spegnere la TV mentre è in corso l’inizializzazione della prima installazione. (*) Alcune opzioni potrebbero non essere disponibili a seconda della selezione del paese. Uso della funzione SatcoDX Cette option de menu vous permet d’exporter ou d’importer la liste de satellites disponible.
Caratteristiche e funzioni del menu TV Indice del menu Immagine Modalit Sarà possibile modificare la modalità immagine per soddisfare le proprie preferenze o i propri requisiti. Immagine può essere impostata su una di queste opzioni: Cinema, Gioco, Sport, Dinamicae Naturale. Contrasto Imposta i valori di luminosità e buio dello schermo. Luminosità Imposta il valore di luminosità per lo schermo. Nitidezza Imposta il valore di nitidezza per gli oggetti visualizzati sullo schermo.
Indice menu Audio Volume Regola il livello del volume. Equalizzatore Seleziona la modalità equalizzatore. Le impostazioni personalizzate possono essere fatte solo quando ci si trova in modalità utente. Bilanciamento Questa impostazione si usa per enfatizzare il bilanciamento dell’altoparlante sinistro o destro. Cuffie imposta il volume della cuffia. Prima di usare le cuffie, verificare che questa vode del menu sia impostata sulla voce Cuffie.
Altre impostazioni: visualizza altre opzioni di impostazione della TV: Interruzione Menu Modifica la durata di timeout per le schermate del menu. Ricerca canali codificati Quando questa impostazione è attiva, il processo di ricerca localizzerà anche i canali criptati. Sfondo blu Attiva o disattiva il sistema di sfondo blu quando il segnale è debole o assente. Aggiornamento software Assicurarsi che il ricevitore digitale contenga sempre il software più aggiornato.
Funzionamento generale Utilizzo dell'elenco canali La TV ordina tutte le stazioni salvate nell'Elenco dei Canali. Sarà possibile modificare questo elenco dei canali, impostare i canali preferiti o le stazioni attive da elencare servendosi delle opzioni Elenco Canali (Channel List). Configurazione delle impostazioni genitori Per proibire la vista di alcuni problemi, i canali e i menu possono essere bloccati servendosi del sistema di controllo genitori.
Guida alla risoluzione dei problemi e suggerimenti La TV non si accende Accertarsi che il cavo di alimentazione sia saldamente collegato alla presa a parete. Le batterie nel telecomando possono essere scariche. Premere il tasto Power sulla TV oppure Immagine di qualità scadente • E’ stato selezionato il sistema TV corretto? • Il segnale di livello basso può provocare distorsioni dell’immagine.
Modalità tipica monitor - ingresso PC La tabella che segue illustra alcune delle modalità di visualizzazione tipiche del video. La TV potrebbe non supportare tutte le risoluzioni.
Formati di file supportati per la modalità USB Media Estensione Formato Note Video .dat, .mpg, .mpeg Mpeg1-2 1080P@30fps, 50Mbit/sec .ts, .trp, .tp, .m2ts MPEG2 ,H.264, VC1, AVS, MVC H.264:1080Px2@25fps, 1080P@50fps MVC:1080P@ 24fps Altro: 1080P@30fps - 50Mbit/sec .vob MPEG2 1080P@30fps 50Mbit/sec .mkv MPEG1-2-4, H.264 H.264:1080Px2@25fps, 1080P@ 50fps, 1080P@30fps, 50Mbit/sec .mp4 MPEG4, XviD, H.264 H.264:1080Px2@25fps, 1080P@ 50fps, 1080P@30fps, 50Mbit/sec .avi MPEG2-4, Xvid, H.
Risoluzioni DVI supportate Se si collegano dei dispositivi ai connettori della TV utilizzando cavi di conversione DVI (non in dotazione), e possibile fare riferimento alle seguenti informazioni sulla risoluzione.
İçindekiler Güvenlik Bilgileri........................................... 69 Bakım.................................................................... 70 Başlangıç............................................................... 71 Bilgiler & Özellikler & Aksesuarlar......................... 71 Uzaktan Kumanda ................................................ 74 Bağlantılar............................................................. 75 İlk Kurulum - USB Bağlantıları...............................
n Bakım Önce fişi prizden çıkarın. Görüntü paneli, Kabin, Taban Normal bakım: Kir veya parmak izlerini gidermek için, ekran paneli, kabin veya taban yüzeyini yumuşak bir bezle hafifçe silin. İnatçı kirler için: (1) Önce yüzeydeki tozu silin. (2) Yumuşak bir bezi duru su veya keskin olmayan deterjan-su karışımı ile (100 ölçek suya 1 ölçek deterjan) ıslatın. (3) Bezi iyice sıkın. (Sıvıların televizyonun içine girmemesine dikkat edin. Aksi halde ürün arızalanabilir.
Başlangıç Bilgiler & Özellikler & Aksesuarlar • Teletext. Çevresel Bilgi Bu televizyon çevrenin korunmasına yardımcı olmak için daha az enerji tüketecek şekilde tasarlanmıştır. Enerji tüketimini azaltmak için aşağıdaki adımları gerçekleştirmelisiniz: Resim menüsünde bulunan Güç Tasarrufu Modunu kullanabilirsiniz. Eğer Güç Tasarrufu Modunu Eko olarak ayarlarsanız, TV enerji tasarrufu moduna geçecek ve TV’nin parlaklığı optimum seviyeye indirilecektir.
Kanal değiştirmek için: Tuşun ortasına bastığınızda ekranda kanal bilgisi sembolü görüntülenecektir. Yukarı ve aşağı tuşlarına basarak kayıtlı kanallar arasında gezinin Kaynağı değiştirmek için: Tuşun ortasına iki kere bastığınızda ekranda kaynak listesi görüntülenecektir. Yukarı ve aşağı tuşlarına basarak mevcut kaynaklar arasında gezinin. TV'yi kapatmak için: Ortadaki tuşa basarak birkaç saniye basılı tutunuz, TV bekleme moduna geçecektir.
Özellikler TV Yayını PAL B/G D/K K I/I' Alınan Kanallar VHF (BAND I/III) - UHF (BAND U) - HYPERBAND Yetkili Temsilci: Dijital Alış Tam entegre karasal yayınkablolu yayın-uydu alıcılı TV (DVB-T-C-S) Panasonic Marketing Europe GmbH Panasonic Test Merkezi Winsbergring 15, 22525 Hamburg, Germany (DVB-S2 uyumlu) (DVB-T2 uyumlu) Internet Sitesi: http://panasonic.net Kayıtlı Kanalların Sayısı 10.
Başlangıç Uzaktan Kumanda 1. Bekleme / Açma 2. Rakam tuşları 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. Görüntüyü Dondur / Sabitle (TXT modunda) Bilgi / Göster (TXT modunda) Sesi Arttır / Azalt Menü Açık/Kapalı Yön Tuşları Seç / Onayla Seçenek Menüsü Açık/Kapalı Medya Tarayıcı TV Kaynağı / Kanal Listesi Görüntü Oranını Değiştir Renkli Tuşlar (Kırmızı/Yeşil/Sarı/Mavi) Mono-Stereo Dual I-II / Audio-Altyazı Dili 15. Hızlı Geri Sar (Medya Tarayıcı modunda) 16. İşlev yok 17. Duraklat (Medya Tarayıcı modunda) 18.
Başlangıç Bağlantılar Konektör Tip Kablolar Cihaz Skart Bağlantı (arka) VGA Bağlantı (arka) YAN AV PC/YPbPr Ses Bağlantı (yan) Yan Ses/Video BağlantıKablosu (cihazlabirlikte verilmiştir) PC Ses Kablosu (Cihazla birlikte verilmemiştir) HDMI Bağlantı (arka) SPDIFF (Koaksiyel Çıkış) Bağlantı (arka) YPBPR YPbPr Video Bağlantı (yan) YAN AV AV Bağlantı Kablosu (cihazla birlikte verilir) YAN AV (Ses/Video) Bağlantı (yan) KULAKLIK AV Bağlantı Kablosu (cihazla birlikte verilir) N O T : Y P b P r v e y
Başlangıç İlk Kurulum - USB Bağlantıları Açma/Kapatma TV’yi Açmak için Güç kablosunu 220-240V AC 50 Hz’e bağlayınız. Arka sol kısımdaki “ ” tuşunu “|” pozisyonuna getiriniz, böylece TV bekleme moduna geçecektir. Bekleme LED'i yanacaktır. Bekleme konumundan çıkıp TV’yi açabilmek için aşağıdakilerden birini yapınız: Uzaktan kumanda üzerinde bulunan “ ” tuşuna, P+ / P- veya bir sayı tuşuna basınız. TV’nin sol tarafındaki kontrol tuşuna basınız. Televizyon açılacaktır.
Uydu Kanal Listesi Özelliğinin Kullanımı Medya Oynatıcı Menüsü Uydu Ayarlarını kullanarak Uydu Kanal Listesi işlemlerini gerçekleştirebilirsiniz. Uydu Kanal Listesi menüsünde Uydu Kanal Listesi özelliği ile ilgili iki seçenek vardır: Uydu Kanal Listesi verilerini indirebilir ya da yükleyebilirsiniz. Uydu Kanal Listesi özelliği için desteklenen bu fonksiyonları gerçekleştirmek için bir USB cihazının TV’ye bağlanmış olması gerekir.
Menü Özellikleri ve İşlevleri Resim Menüsü İçeriği Modu Tercihlerinize ya da gerekliliklere uyması için resim modunu değiştirebilirsiniz. Resim modu aşağıdaki seçeneklerden herhangi birisine ayarlanabilir: Sinema, Oyun, Spor, Dinamik ve Doğal. Kontrast Ekranın aydınlık ve karanlık değerlerini ayarlar. Parlaklık Ekranın parlaklık değerini ayarlar. Keskinlik Ekranda görüntülenen cisimlerin keskinlik değerini ayarlar. Renk Renk değerini girer, renkleri ayarlar.
Ses Menüsü İçeriği Ses Seviyesi Sesi seviyesini ayarlar. Equalizer Ekolayzır modunu seçer. Sadece kullanıcı modunda özel ayarlar yapılabilir. Balans Bu ayar, sol veya sağ hoparlör dengesini belirtmek için kullanılır. Kulaklık Kulaklık sesini ayarlar. Kulaklık kullanmadan önce, bu menü öğesinin Kulaklık olarak ayarlandığından emin olunuz. Bu ayar Hat Çıkışı olarak ayarlanırsa, kulaklık soketindeki çıkış maksimum seviyeye ayarlanır, bu da işitme hasarına neden olabilir.
Diğer Ayarlar: TV setinin diğer ayar seçeneklerini görüntüler Menu Oto. Kapanma Menü ekranlarının zaman aşımı süresini değiştirir. Şifreli Kanalları Tarama Bu ayardayken, arama işlemi şifreli kanalları da tespit edecektir. Mavi Ekran Sinyal zayıfsa veya yoksa mavi arka plan sistemini etkinleştirir veya devre dışı bırakır. Yazılım yükseltme Set üstü kutunuzun daima en son güncelleme bilgisine sahip olduğundan emin olunuz. Uygulama Sürümü Uygulama sürümünü görüntüler.
Genel TV Çalışması Kanal Listesinin Kullanılması TV, Kanal Listesinde yer alan tüm kaydedilmiş istasyonları sıralar. Kanal Listesi seçeneklerini kullanarak bu kanal listesini düzenleyebilirsiniz, favorileri ayarlayabilirsiniz veya listelenecek etkin istasyonlar ayarlayabilirsiniz. Yetişkin Ayarlarını Yapılandırma Belli programların görüntülenmesini engellemek için kanallar ve menüler Yetişkin kontrol sistemiyle kilitlenebilir. Yetişkin kilidi menü seçeneklerini göstermek için PIN numarası girilmelidir.
• İki cihazı televizyona aynı anda bağladığınızda görüntü kalitesi düşebilir. Böyle bir durumda cihazlardan birinin bağlantısını kesiniz. Görüntü yok • Görüntü Yok, TV’nizin herhangi bir yayın almadığı anlamına gelmektedir. Uzaktan kumandada doğru tuşlara bastınız mı? Bir kez daha deneyiniz. Ayrıca, doğru giriş kaynağının seçili olduğundan emin olunuz.
PC Girişi Tipik Ekran Modları AV ve HDMI Sinyal Uyumluluğu Aşağıdaki tablo bazı tipik video ekran modlarının bir listesini vermektedir. TV’niz tüm çözünürlükleri desteklemiyor olabilir.
USB Modunda Desteklenen Dosya Formatları Medya (Ortam) Uzantı Format Notlar Görüntü .dat, .mpg, .mpeg Mpeg1-2 1080P@30fps 50Mbit/s .ts, .trp, .tp, .m2ts MPEG2 ,H.264, VC1, AVS, MVC H.264:1080Px2@25fps, 1080P@50fps MVC:1080P@ 24fps Diğer: 1080P@30fps - 50Mbit/sec .vob MPEG2 1080P@30fps 50Mbit/sec .mkv MPEG1-2-4, H.264 H.264:1080Px2@25fps, 1080P@ 50fps, 1080P@30fps, 50Mbit/s .mp4 MPEG4, XviD, H.264 H.264:1080Px2@25fps, 1080P@ 50fps, 1080P@30fps, 50Mbit/s .avi MPEG2-4, Xvid, H.264 H.
Desteklenen DVI Çözünürlükleri Cihazı DVI dönüştürme kablosu (DVI - HDMI kablosu - birlikte verilmemektedir) ile TV’nizin konektörüne bağladığınızda, aşağıdaki çözünürlük bilgilerine başvurabilirsiniz.
A Product fiche TQB0E2387 TQB0E2387 TQB0E2387 TQB0E2387 Panasonic Corporation TX-32A300B TX-L39BLW6 TX-L50BLW6 Panasonic Corporation Panasonic Corporation A+ A++ A+TX-L50BLW6 Panasonic Corporation TX-50AW304 TX-32A300B TX-L39BLW6 TX-L39BLW6 TX-L50BLW6 80 cmTX-32A300B / A++ 32 inches 98 cm / 39 inches 126 cm / 50 TX-L50BLW6 inches TX-L39BLW6 A+ A++ A+ A+ A+ 34 W 34 76cm W / 50 A+ A++ A+inches 80 cm 32 inches 98 cm cmW 39 inches 126 cm 39 inches 126 // 50 inches 12798 cm // /50 inches 47 kWh 47 kWh 105 kW
Lietuvių k.