Operating Instructions

Network settings
Network Connection
Ensure the connections are completed before starting network setup.
Network > Network connections
1. Display the menu with MENU.
2. Select Setup > Network > Configuration > Internet Connection and press
OK to access.
3. Set to On to enable internet connection.
4. Select Interface and press OK to access.
5. Select your network connection type and press OK to store.
Ethernet / Wireless
Ethernet:
Wired connection with a LAN cable
1) Select IP Setting and press OK to access.
2) Set Address Type to Auto.
– To set manually, select Manual and set each item.
Wireless:
Wireless connection with a wireless access point
1) Select Wireless Settings and press OK to access.
– Confirm the encryption key, settings and position of your access
point before starting setup. For details, read the manual of the
access point.
2) Select Scan and press OK to search wireless networks.
– For Manual, enter SSID and follow the on-screen instructions.
– For Auto, select PIN / PBC and follow the on-screen instructions.
3) Select your desired access point and press OK to access.
– Available Wireless Networks are displayed automatically.
– It is recommended to select the encrypted access point.
4) Enter the encryption key of the access point and press OK to set.
6. Select Network Status and press OK to check the status.
- 102 -