Operating Instructions
Setting for USB HDD
Format and set up the USB HDD with this TV in order to use it for recording.
All the USB devices recognised as a mass storage device are listed.
1. Display the menu with MENU.
2. Select Setup > Record Setting > Device Information and press OK to
access.
3. Select the USB HDD for recording and press OK to start setup.
●
Some USB HDD may not be displayed.
4. Select Set PVR and press OK to set.
●
To format
1) Select Format and press OK to access.
2) When a confirmation screen is displayed, select Yes and press OK to
start formatting.
●
To measure the transfer speed, select Speed test and press OK.
= Note =
●
You can only select one USB HDD for recording at a time.
●
You cannot change the settings for the USB HDD while recording is in
progress.
- 69 -