Operating Instructions
Table Of Contents
- Read first
- Home
- Watching
- Media Player
- Network
- Functions
- Settings
- Support
Digital TV
Before requesting service or assistance, please follow these simple guides to
solve the problem.
If the problem still persists, please contact your local Panasonic dealer for
assistance.
No satellite channel is found
●
Set LNB frequency in Antenna setup to suit your environment.
Watching > Tuning and editing channels > Automatic channel search
Unable to receive analogue TV channel while the initial setup
The analogue TV channel cannot be searched when tuning the satellite
channel. Set Analogue Manual Scan manually after the initial setup.
Watching > Tuning and editing channels > Other Settings
Unable to receive signals with a high-performance aerial
●
Install an aerial individually for the TV and VCR (or use a splitter).
Interference or frozen / disappearing image
●
Check Signal Condition. If the level of Signal Quality is low, check aerial.
Watching > Tuning and editing channels > Other Settings
●
Turn the TV off with Mains Power On / Off switch, then turn it on again.
No programmes shown on TV Guide
●
Check the digital transmitter.
●
Adjust the direction of the aerial or dish to another transmitter installed
nearby.
- 152 -