Operating Instructions

Energy saving functions
The TV can be eco-friendly using energy-saving functions.
The TV goes into Standby mode in the following conditions:
●
Off Timer is active.
Watching > Basic > Timer
●
No operation is performed for the set hours in Auto Sleep.
●
No signal is received and no operation is performed for 10 minutes while
No signal Power off is set to On.
■ Auto Sleep
1. Display the menu with MENU.
2. Select Setup > Time Setup > Auto Sleep and press OK to access.
3. Select 8 Hours / 6 Hours / 4 Hours / Off and press OK to set.
Auto Sleep
Automatically turns the TV to Standby mode for energy saving when no
operation is performed for the set hours.
●
Automatic input switching with the connected equipment affects this
function and time-count resets.
●
A notification message will appear 3 minutes before going into Standby
mode.
●
Changing the default configuration may result in higher energy
consumption of the product.
■ No signal Power off
1. Display the menu with MENU.
2. Select Setup > Time Setup > No signal Power off and press OK to access.
3. Select On / Off and press OK to set.
No signal Power off
Automatically turns the TV to Standby mode to prevent unnecessary power
consumption when no signal is received and no operation is performed for
10 minutes.
●
A notification message will appear 3 minutes before going into Standby
mode.
- 28 -