Operating Instructions

English
11
6
B
7
Note

Remove the protective sheet and the protective film
after installing the pedestal.
Removing the pedestal
Be sure to remove the pedestal in the following
procedures when you use the wall-hanging bracket or
repack the TV.
1
Remove the assembly screws
from the TV.
2 Pull out the pedestal from the TV.
3
Remove the assembly screws
from the bracket.
Installing the wall-
hanging bracket
Please contact your local Panasonic dealer to purchase
the recommended wall-hanging bracket.

Holes for wall-hanging bracket installation
Rear of the TV
a
b
40-inch model
a: 200 mm
b: 200 mm
50-inch model
58-inch model
65-inch model
a: 400 mm
b: 200 mm
(View from the side)
Depth of screw
40-inch model
minimum: 9 mm
maximum: 11 mm
50-inch model
minimum: 8 mm
maximum: 20 mm
58-inch model
minimum: 9 mm
maximum: 22 mm
65-inch model
minimum: 10 mm
maximum: 22 mm
Diameter: M6
Screw for fixing the TV onto the
wall-hanging bracket (not supplied with
the TV)
Warning

Using other wall-hanging brackets, or installing a wall-
hanging bracket by yourself have the risk of personal
injury and product damage. In order to maintain the
unit’s performance and safety, be absolutely sure to
ask your dealer or a licensed contractor to secure
the wall-hanging brackets. Any damage caused by
installing without a qualified installer will void your
warranty.

Carefully read the instructions accompanying optional
accessories, and be absolutely sure to take steps to
prevent the TV from falling off.

Handle the TV carefully during installation since
subjecting it to impact or other forces may cause
product damage.

Take care when fixing wall brackets to the wall.
Always ensure that there are no electrical cables or
pipes in the wall before hanging bracket.