Operating Instructions

English
19
2 Power LED
Red:
Standby
Green:
On
•
Depending on the ambient brightness,
adjusts the brightness of LED to easy-to-view
levels automatically.
Orange:
Standby with some functions (recording, etc.)
active

The LED blinks when the TV receives a command
from the remote control.
3 Input mode selection

Press repeatedly until you reach the desired mode.
[Main Menu]

Press and hold for about 3 seconds to display main
menu.
OK (when in the menu system)
4 Channel Up / Down

Cursor Up / Down (when in the menu system)
5 Volume Up / Down

Cursor Left / Right (when in the menu system)
6 Mains power On / Off switch

Use to switch the mains power.

To turn Off the apparatus completely, you must pull
the mains plug out of the mains socket.

[
]: Standby / On
First time Auto Setup
When the TV is turned on for the first time, it will
automatically search for available TV channels and give
options to set up the TV.

These steps are not necessary if the setup has been
completed by your local dealer.

Please complete connections (p. 12 - 16) and
settings (if necessary) of the connected equipment
before starting Auto Setup. For information about
the settings for the connected equipment, read the
manual of the equipment.
1 Plug the TV into a live mains socket
and turn the power on

Takes a few seconds to be displayed.
2 Select the following items
Set up each item by following the on-screen instructions.
Example:
Please select your viewing environment.
Home Shop
 How to use the remote control
Move the cursor
Access the item / store the setting
Return to the previous item (if available)
Select your country
Select [Home]
Select [Home] for use in a home viewing environment.

[Shop] is for shop display.

To change the viewing environment later on, the set
will need to have all settings initialised by accessing
Shipping Condition.
Set up the network connection
Select your region
Auto Setup is now complete and the
TV is ready for viewing.