DVB-S_Installation_Guide_for_HX700

English - 3 -

1.2. Antenna Type - DiSEqC

• Set the antenna type/satellite type to Universal for DiSEqC satellite system. Press OK, highlight Universal

and press OK again.

Press the Right directional button to proceed.

• The rst satellite option will be preset in accordance with the selected operator. Highlight that satellite option

and press OK. Highlight DiSEqC Set and press OK. DiSEqC 1.0 Port and DiSEqC 1.1 Port options will be

available. Highlight the option that corresponds to your system and press OK. DiSEqC port options will be

displayed. Highlight the port option to which the satellite of the selected operator is allocated and press OK.

(A=1, B=2, C=3, D=4)

Press the Right directional button to proceed.

• Highlight Scan and press OK or Right directional button to proceed.

• The Scan Mode option will be preset to Network and cannot be changed. Highlight Channel and press OK.

Highlight the option which you prefer and press OK.

Press Right directional button to start the channel search.