DVB-S_Installation_Guide_for_HX700

English - 4 -

1.3. Antenna Type - Unicable

• Set the antenna type/satellite type to Singlecable or Jess Singlecable for Unicable satellite system.

Press OK, Singlecable and Jess Singlecable options will be available. Highlight the option that corresponds

to your system and press OK. (Singlecable = Unicable 1, Jess Singlecable = Unicable 2)

Highlight Tuner and press OK. Highlight the number of the user band which is allocated to your TV and press

OK.

The Band frequency option will change in accordance with the Tuner(User Band) selection. If you need to

change the frequency highlight Band frequency and press OK. Highlight the frequency of the user band

which is allocated to your TV and press OK. If you need to dene a di󰀨erent frequency highlight User dened

option and press OK.

User dened option can be used if you set the Band frequency option accordingly. Highlight User dened

and press OK. Enter the frequency using numeric buttons on the remote or use the virtual keyboard, then

highlight the tick mark on the keyboard and press OK.

Press the Right directional button to proceed.

• The rst satellite option will be preset in accordance with the selected operator.

Press the Right directional button to proceed.

• Highlight Scan and press OK or Right directional button to proceed.